Camera Housings

Plan Your Deployment

Environmental exposure and weather rating requirements
Operating temperature range considerations
IP and impact protection standards
Camera size and mounting compatibility
Maintenance access and cable management planning

Showing Results for Camera Housings

Compare

Out of stock
Vivotek

SKU: AE-238-wBS

Vivotek AE-238-wBS Outdoor Weatherproof Camera Housing Heater & Blower

Weatherproof box camera housing with integrated heater & fan for -20°C to 65°C
- 10W heater prevents lens fog; 2W fan manages heat in temps up to 65°C
- IP68 waterproof and IK10 vandal-rated cast aluminum for outdoor durability
- 24VAC/VDC input with dual 24V AC/DC and 12V DC outputs; 30W max power
Special Order · Ships in 2-3 weeks

$360.00 $256.99 Save $103.01

Add to Cart
The item has been added
Free shipping over $499

$360.00 $256.99 Save $103.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AE-239-wBS

Vivotek AE-239-wBS Outdoor Vandal-Proof Camera Housing

Cast aluminum housing with IP68/IK10 for extreme outdoor surveillance
- IP68 waterproof + IK10 impact rated; survives full submersion and vandal strikes
- Auto heater (10W, ≤30°C) and fan (≥40°C) maintain lens clarity and thermal stability
- PoE 802.3 input powers camera + climate control on single 30W max budget
Special Order · Ships in 2-3 weeks

$502.00 $357.99 Save $144.01

Add to Cart
The item has been added
Free shipping over $499

$502.00 $357.99 Save $144.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AE-23A-P

Vivotek AE-23A-P Fixed Outdoor Enclosure

IP68 cast aluminum enclosure with IK10 impact resistance for outdoor cameras
Special Order · Ships in 2-3 weeks

$986.00 $701.99 Save $284.01

Add to Cart
The item has been added
Free shipping over $499

$986.00 $701.99 Save $284.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AE-23E-v2

Vivotek AE-23E-V2 Outdoor Weatherproof Heated PoE Housing

IP68 + IK10 outdoor housing with auto-heated window for year-round PoE cameras
- IP68 waterproof and IK10 vandal-proof cast aluminum protects in extreme conditions
- 10W window heater + cooling fan auto-activate between –20°C to 65°C operating range
- PoE 802.3bt single-cable power (50–57VDC) with wall, ceiling, corner, or pedestal mount
Special Order · Ships in 2-3 weeks

$588.00 $417.99 Save $170.01

Add to Cart
The item has been added
Free shipping over $499

$588.00 $417.99 Save $170.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AE-23L

Vivotek AE-23L Outdoor Camera Housing

IP68 cast aluminum housing with IK10 vandal protection for outdoor cameras
- IP68 waterproof rated for complete dust and water immersion protection
- IK10 impact-rated cast aluminum resists vandalism in high-risk deployments
- Integrated heater and dual fans maintain operation from -20°C to 65°C
Special Order · Ships in 2-3 weeks

$604.00 $429.99 Save $174.01

Add to Cart
The item has been added
Free shipping over $499

$604.00 $429.99 Save $174.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AE-243-wBS

Vivotek AE-243-WBS Heated Blower Outdoor IR Housing

Heated outdoor housing with 6W IR, IP68/IK10 rated for -20°C to 65°C
- Auto-switching heater and fan maintain lens clarity across extreme temperature swings
- 6W fixed IR LED delivers 50m night vision range at 25° angle for perimeter coverage
- IP68 waterproof and IK10 impact-rated cast aluminum housing fits all Vivotek box cameras
Special Order · Ships in 2-3 weeks

$502.00 $357.99 Save $144.01

Add to Cart
The item has been added
Free shipping over $499

$502.00 $357.99 Save $144.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AE-244-wBS

Vivotek AE-244-WBS Heated Blower Outdoor IR Housing

Outdoor IR housing with heated blower for Vivotek box cameras, -20°C to 65°C
- IP68 waterproof, IK10 vandal-proof cast aluminum withstands harsh weather
- Auto-heated window and cooling fan maintain lens clarity in extreme temps
- 50m IR LED night vision with PoE and DC 12V dual power connectivity
Special Order · Ships in 2-3 weeks

$593.00 $421.99 Save $171.01

Add to Cart
The item has been added
Free shipping over $499

$593.00 $421.99 Save $171.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AE-510

Vivotek AE-510 Stainless Steel Camera Housing

IP68 stainless steel housing for cameras in coastal and industrial sites
Special Order · Ships in 2-3 weeks

$2,168.00 $1,542.99 Save $625.01

Add to Cart
The item has been added
Free shipping over $499

$2,168.00 $1,542.99 Save $625.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AE-510-I

Vivotek AE-510-I Stainless Steel Camera Enclosure

IP68 stainless steel enclosure with active thermal control for coastal & industrial sites
Special Order · Ships in 2-3 weeks

$3,102.00 $2,207.99 Save $894.01

Add to Cart
The item has been added
Free shipping over $499

$3,102.00 $2,207.99 Save $894.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AI-104-010

Vivotek AI-104-010 External Infrared LED Illuminator

850nm IR illuminator with 100m range and 10° beam for night surveillance
Special Order · Ships in 2-3 weeks

$593.00 $421.99 Save $171.01

Add to Cart
The item has been added
Free shipping over $499

$593.00 $421.99 Save $171.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AI-104-035

Vivotek AI-104-035 850nm IR LED Illuminator

850nm IR illuminator with 25m range and 35° beam for night surveillance
Special Order · Ships in 2-3 weeks

$593.00 $421.99 Save $171.01

Add to Cart
The item has been added
Free shipping over $499

$593.00 $421.99 Save $171.01

Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

Environmental Hazards & IP Rating Selection

IP67 housings resist dust and submersion; IP69K adds high-pressure washdown resistance for food plants and wash bays. Match the enclosure's rating to your site's moisture, salt spray, and particulate exposure. Poor environmental protection is a leading cause of system failure during critical incidents.

Thermal Load Management in Extreme Climates

Unheated housings in freezing zones cause lens fogging and sensor shutdown; unvented enclosures in desert heat degrade optics and electronics. Heated/cooled models maintain sensor temperature within ±5°C, preventing drift and extending component life by 3–5 years in harsh climates.

Material Selection: Corrosion & Structural Integrity

Coastal and chemical-spray environments demand 316-grade stainless steel or marine-grade aluminum; standard aluminum corrodes within 18 months. Hanwha and Pelco offer proven marine-grade options. Check gasket material (EPDM vs. Viton) to match chemical exposure.

Optical Clarity & Anti-Glare Coatings

Low-grade polycarbonate yellows and clouds within 3–5 years in UV-intense regions, degrading video clarity and DORI (Identification distance). Premium housings use multi-layer AR coating and UV-stabilized polycarbonate, maintaining 95%+ light transmission over 10 years.

Integrator & Compliance Standards

ATEX and IECEx certifications are non-negotiable in hazardous-location projects; missing certification can void insurance and halt system acceptance. Verify cable-entry ratings, pressure-relief mechanisms, and third-party test reports before specifying. Standards consistency across multi-site deployments prevents costly rework.

Power & Cooling Load Budgeting

Heated housings draw 40–100W; cooled units draw 150–300W depending on climate delta. Factor PoE+ or auxiliary power requirements into your PoE budget planning, especially in multi-camera arrays on a single switch.

Technology Stack

The specs and acronyms that actually affect camera housings performance.

IP Rating (Ingress Protection)

Two-digit code: first digit = dust resistance (0–6), second = liquid resistance (0–9K). IP67 = dust-tight + immersible to 1m; IP69K = dust-tight + high-pressure jets. Outdoor surveillance typically requires IP66–IP69K.

ATEX / IECEx Certification

European and international standards for equipment in explosive atmospheres (Group I mines, Group II gas/vapor hazardous zones). Requires independent third-party testing; non-negotiable for refineries, grain facilities, and chemical plants.

Optical Transmission & AR Coating

Percentage of light passing through the enclosure window (typically 92–98%). Anti-reflective (AR) multi-layer coatings reduce glare and internal reflections, critical for night-vision and 4K surveillance where every photon matters.

Thermal Management (Heated / Cooled)

Active systems maintain camera sensor and lens within operating range (typically 0°C to +50°C) regardless of ambient. Heated models use thermostats to prevent condensation; cooled models use thermoelectric or fan systems for desert/high-sun exposure.

Purge / Pressurization Systems

Positive-pressure air flow (clean filtered air) prevents dust and contaminant ingress without sealed windows. Standard in dusty industrial sites; requires air compressor and filter maintenance.

Material Grade & Corrosion Class

Aluminum grades: 5083 (marine), 6063 (standard); Stainless: 304 (moderate), 316 (marine/chemical). Corrosion class C5 (coastal) requires 316 or specialized coatings; C1 (interior) tolerates 304. Check certification per ISO 12944.

Typical Deployment Scenarios

Coastal Port & Maritime Facility (8–12 cameras)

High salt-spray environment demands Pelco or Hanwha 316 stainless housings with IP69K rating, wiper/heater packages, and PoE+ for active heating. Sun shields extend polycarbonate life. Budget $2.5K–4K per enclosure.

Petrochemical Refinery (15–25 cameras, ATEX Zone 1)

Explosion-proof housings with certified purge systems, 4–6 air changes/hour, and positive pressure maintained by independent compressor. Requires weatherproof cabinet for control electronics. ATEX certification audit mandatory before commissioning.

Midwest Parking Lot & Retail (6–10 cameras, -20°C to +55°C seasonal)

Heated housings with thermostatic control prevent winter lens fogging; passive weathershields reduce summer glare. Pair with Axis or Vivotek thermal-management models; ensure PoE+ budget. Typical cost $1.2K–2K per unit.

Food Processing Plant (12–18 cameras, washdown zone)

IP69K aluminum housings with stainless hardware, 304+ grade for moisture/bleach spray, and lens protectors to minimize washdown impact. Pair with dome covers for camera-mounting compatibility. Plan quarterly gasket/window inspection.

Frequently Asked Questions

What's the difference between IP67 and IP69K housings?

IP67 is dust-tight and can handle brief immersion to 1 meter; IP69K adds protection against high-pressure (80°C+) jets common in washdown environments. Choose IP69K for food plants, car washes, and high-humidity spray zones; IP67 suffices for most outdoor retail and parking deployments.

Do I need a heated housing in my climate?

If winter temperatures drop below 0°C and humidity is high, lens fogging and condensation inside the enclosure will degrade video quality within hours. Heated housings maintain internal temperature above the dew point; they're essential for year-round surveillance in northern climates or unheated warehouses.

What material resists coastal salt spray best?

316-grade stainless steel and marine-grade 5083 aluminum resist salt corrosion far better than standard 304 stainless or 6063 aluminum. Verify ISO 12944 corrosion-class C5 certification if your site is within 500m of saltwater. Expect 40–60% cost premium over standard materials.

Are ATEX certifications required for my refinery installation?

Yes, ATEX (or equivalent IECEx) certification is mandatory in European and many international hazardous-location projects. Non-certified equipment voids insurance, halts system acceptance, and creates liability. Verify the specific Group and Category (I/II, 1/2/3) required by your site's hazard classification before specifying.

How often do I need to maintain or replace the gaskets and windows?

Gaskets (EPDM or Viton) typically degrade within 5–7 years in UV-heavy outdoor environments; windows cloud or yellow within 5–10 years depending on climate and coating quality. Plan annual inspections in harsh climates and budget for gasket/window replacement every 5 years to maintain IP rating.

Can I use a standard housing with a PTZ camera, or do I need a PTZ enclosure?

PTZ cameras require specialized housings with synchronized wiper, washer, and heater systems to match the pan-tilt mechanics. Standard fixed housings cannot accommodate PTZ movement and will fail within weeks. Always pair PTZ cameras with PTZ-specific dome housings and verify mounting compatibility before purchase.

Plan Your Deployment

Showing Results for Camera Housings

Vivotek AE-238-wBS Outdoor Weatherproof Camera Housing Heater & Blower

Vivotek AE-239-wBS Outdoor Vandal-Proof Camera Housing

Vivotek AE-23A-P Fixed Outdoor Enclosure

Vivotek AE-23E-V2 Outdoor Weatherproof Heated PoE Housing

Vivotek AE-23L Outdoor Camera Housing

Vivotek AE-243-WBS Heated Blower Outdoor IR Housing

Vivotek AE-244-WBS Heated Blower Outdoor IR Housing

Vivotek AE-510 Stainless Steel Camera Housing

Vivotek AE-510-I Stainless Steel Camera Enclosure

Vivotek AI-104-010 External Infrared LED Illuminator

Vivotek AI-104-035 850nm IR LED Illuminator

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Camera Housings

Frequently Asked Questions

Related Categories

Engineering Reading