Camera Covers & Equipment Protection | Commercial Surveillance

Plan Your Deployment

Indoor vs outdoor exposure and weather rating requirements
Vandal-resistant and impact protection needs
Compatibility with specific device models
Mounting method and clearance considerations
Maintenance access and long-term durability planning

Sub categories

Showing Results for Covers & Protection

Compare

Out of stock
Vivotek

SKU: AT-SWH-000

Vivotek AT-SWH-000 Electrical Safety Kit 20-40KA

20-40KA surge protection kit for Vivotek surveillance cabinets
- 20-40KA surge rating protects against severe electrical faults and voltage spikes
- MCB fuse and Type 2 surge protector rated to IEC 61643-11 and UL 1077
- Complete kit with terminal blocks, door alarm switch, and hardware for AT-CAB-001/AT-CAS-001
Special Order · Ships in 2-3 weeks

$382.00 $271.99 Save $110.01

Add to Cart
The item has been added
Free shipping over $499

$382.00 $271.99 Save $110.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AT-SWH-002

Vivotek AT-SWH-002 Door Detection Switch

Cabinet door monitoring switch with 300mm cable for Vivotek enclosures
- Real-time door open/close detection integrated via direct I/O port connection
- Operates across -40°C to 85°C with EN 61058 and UL 61058 safety approvals
- Compact 41 x 10 x 30mm switch with 300mm cable and mounting hardware included
Special Order · Ships in 2-3 weeks

$35.00 $24.99 Save $10.01

Add to Cart
The item has been added
Free shipping over $499

$35.00 $24.99 Save $10.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: BLACK PANEL

Vivotek BLACK PANEL Replacement Surface for CC8130HS

Black replacement panel for CC8130(HS) series—quick swap, zero reconfiguration
Special Order · Ships in 2-3 weeks

$50.00 $34.99 Save $15.01

Add to Cart
The item has been added
Free shipping over $499

$50.00 $34.99 Save $15.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: IP9165-LPRKIT-S-V2 (50MM)

Vivotek IP9165-LPRKIT-S-V2 License Plate Recognition Box Cam

License plate recognition box cam captures vehicles up to 60 mph
Special Order · Ships in 2-3 weeks

$4,528.00 $3,222.99 Save $1,305.01

Add to Cart
The item has been added
Free shipping over $499

$4,528.00 $3,222.99 Save $1,305.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: IP9165-LPRKIT-S-V2 (40MM)

Vivotek IP9165-LPRKIT-S-V2 License Plate Recognition Camera

License plate recognition camera for vehicles up to 60 mph with 70+ formats
Special Order · Ships in 2-3 weeks

$3,986.00 $3,200.99 Save $785.01

Add to Cart
The item has been added
Free shipping over $499

$3,986.00 $3,200.99 Save $785.01

Add to quote Compare
Compare

Out of stock
Axis

SKU: 02751-001

Axis TQ4901 Cover Sleeve - 02751-001

Protective mounting sleeve for Q9307-LV dome camera installation
- Fits Axis Q9307-LV dome camera with TP4601-E conduit back box
- High-quality composite material rated IP66/IP67 for indoor and outdoor
- Quick installation with integrated cable management and alignment
Special Order · Ships in 2-3 weeks

$41.00 $40.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$41.00 $40.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: SPB-VAN12

Hanwha SPB-VAN12 Smoked Dome Cover

Smoked dome cover for discreet IP camera protection indoors and out
- Tinted finish reduces glare and reflection while maintaining clear video
- Fits wide range of indoor and outdoor IP camera models
- Tool-free installation with included hardware
Special Order · Ships in 2-3 weeks

$25.00 $17.99 Save $7.01

Add to Cart
The item has been added
Free shipping over $499

$25.00 $17.99 Save $7.01

Add to quote Compare
Compare

Add to Cart The item has been added
Hanwha

SKU: SBV-161WCW

Hanwha SBV-161WCW Weather Cap for Outdoor IP Cameras

Weather cap for Hanwha XNV outdoor cameras—UV and rain protection
- UV-resistant, weather-resistant construction shields optics from sun and precipitation
- Tool-free installation on XNV-C6083R through XNV-C9083R models, no modifications
- Rated for sub-freezing to high-heat extremes; extends camera lifespan 3–5 years
In stock · Ships same business day

$30.00 $20.99 Save $9.01

Add to Cart
The item has been added
Free shipping over $499

$30.00 $20.99 Save $9.01

Add to cart Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

Material Selection: Durability vs. Optical Clarity

Polycarbonate, acrylic, and tempered glass each trade off scratch resistance, UV stability, and transmittance. Read the spec sheet—cheap polycarbonate yellows under sunlight and clouds optics within 18–24 months. Learn how environmental stress impacts system uptime.

Thermal Design for 24/7 Operation

Cameras and intercoms generate heat; stagnant air inside an unvented enclosure causes thermal shutdown during peak load or summer operation. Ensure covers include passive venting or active cooling provisions—especially for Axis and Hanwha ruggedized models rated for continuous duty.

IP Rating Alignment with Deployment Zone

IP54 protects against splash and dust; IP66 withstands heavy wash-down and temporary submersion; IP68 handles prolonged water exposure. Undersizing protection class creates corrosion, power loss, and network reliability failures when salt spray or condensation reaches electronics.

Mounting Compatibility & Accessibility

Covers must integrate with existing mounting brackets and kits—and allow tool-free or quick-release access for lens cleaning, firmware updates, and troubleshooting. Poor design locks technicians out during incident response.

Brand-Specific Form Factors

Covers from ACTi, Ubiquiti, and Comelit are often not interchangeable. Verify OEM part numbers and dimension specs before bulk procurement to avoid costly field retrofits.

PoE Power Draw & Heater Specifications

Heated covers and cooled enclosures draw significant power—confirm PoE budget and switch capacity before deployment. Undersized power infrastructure triggers cascade failures across multi-camera sites.

Technology Stack

The specs and acronyms that actually affect covers & protection performance.

IP Rating (IP54, IP65, IP66, IP67, IP68)

Ingress Protection code defining resistance to solid particles (first digit) and liquid immersion (second digit). IP65 = dust-tight and low-pressure jet; IP67 = temporary submersion; IP68 = continuous underwater duty. Critical for outdoor and wash-down zones.

UV Stabilization & Polycarbonate Grade

UV-stabilized polycarbonate or acrylic resists yellowing and optical degradation under direct sunlight. Grade A materials maintain >90% light transmittance for 5+ years; budget grades drop to 70% within 18 months, killing night vision performance.

Operating Temperature Range & Thermal Management

Passive covers tolerate −40°C to +60°C; active heaters/coolers extend to −50°C and +70°C+ by maintaining internal sensor temperature. Essential for high-altitude, arctic, and desert deployments where ambient extremes exceed camera specs.

Optical Transmittance & Distortion

Clarity measured in %, affects zoom performance, facial recognition accuracy, and DORI identification distance. Anti-reflective coatings improve throughput by 5–10%; inferior covers reduce effective resolution by full aperture stops.

Material Impact Resistance & Vandal Rating

Polycarbonate rated in Charpy impact joules; tempered glass in safety ratings. Vandal-grade covers withstand IK10 (20 J hammer blows) or higher. Cheaper alternatives fail under moderate force, exposing cameras to destruction.

Cable Gland & Strain Relief Design

M20/M25 threaded glands with double-gasket sealing prevent water wicking along cable jackets. Poorly sealed entry points are the #1 cause of field corrosion and power loss at distributed sites—often cheaper to upgrade than troubleshoot later.

Typical Deployment Scenarios

Multi-Camera Warehouse with High-Humidity Wash-Down

12× fixed dome cameras with Axis or Hanwha flood lamps need IP66 polycarbonate covers + heated enclosures to manage condensation. Pair with stainless-steel mounting brackets and sealed power distribution to prevent corrosion at scale.

Coastal Property Access Control with Salt Spray

Entry gates and intercom stations exposed to salt air require marine-grade aluminum covers, stainless hardware, and conformal coating on PCBs. Standard powder-coated steel fails within 6 months; budget 2–3× for corrosion-resistant materials.

Urban Rooftop Surveillance with Wind & UV Load

Fixed or PTZ cameras mounted on building peaks need impact-rated sunshields + vibration dampers to handle wind gusts and thermal cycling. Lightweight polycarbonate reduces moment load; poor design creates structural fatigue and drop hazards.

School Campus with Vandalism Risk & Maintenance Access

60+ domes across K–12 buildings need quick-release vandal guards on high-value zones, low-profile covers in classrooms, and tool-free lens cleaning ports. Integrators must balance protection with accessibility to keep systems maintained and incident-ready.

Frequently Asked Questions

Do clear polycarbonate covers affect night vision or IR performance?

High-quality UV-stabilized covers transmit >95% of visible and IR light; cheaper alternatives scatter IR and reduce effective range by 30–50%. Always verify transmittance spec (not just 'clear') before ordering—label says nothing; datasheet does.

Can I use the same cover on cameras from different brands?

Rarely. Axis, ACTi, and Hanwha domes have different optical seat geometries, thread pitches, and thermal profiles. OEM part numbers exist for a reason—field-fitting 'universal' covers often results in vignetting, condensation traps, and misalignment.

How do I calculate thermal load for heated enclosures in winter?

Add the camera's power draw (e.g., 15 W) to the heater wattage (e.g., 50 W) and confirm total against PoE budget. Budget 90 W per camera in arctic climates—undersizing triggers brownouts across multiple sites.

What's the difference between IP66 and IP67 covers for outdoor mounting?

IP66 = high-pressure jet resistance (wash-down safe); IP67 = temporary submersion (1 meter, 30 minutes). Choose IP67 for flood-prone or below-grade mounting; IP66 is fine for elevated rooftop or wall mount. Oversizing adds cost and weight; undersizing invites field failures.

Should I use active cooling or passive vents for a camera in direct sunlight?

Passive vents are cheaper but unreliable above 40°C ambient; thermal stratification still stagnates internal air. Active cooling (24 V DC fan) is worth the power supply cost for desert, high-altitude, or equipment-dense mounting. Test in worst-case seasonal conditions before bulk deploy.

How often do protective covers need replacement or cleaning?

Clean every 3–6 months (quarterly in salt spray or dust zones); inspect for UV yellowing and micro-cracks annually. Polycarbonate typically survives 4–5 years in temperate climates; 2–3 years in harsh coastal or industrial environments. Budget replacement cycles into long-term maintenance plans.

Covers & Protection

Plan Your Deployment

Sub categories

Showing Results for Covers & Protection

Vivotek AT-SWH-000 Electrical Safety Kit 20-40KA

Vivotek AT-SWH-002 Door Detection Switch

Vivotek BLACK PANEL Replacement Surface for CC8130HS

Vivotek IP9165-LPRKIT-S-V2 License Plate Recognition Box Cam

Vivotek IP9165-LPRKIT-S-V2 License Plate Recognition Camera

Axis TQ4901 Cover Sleeve - 02751-001

Hanwha SPB-VAN12 Smoked Dome Cover

Hanwha SBV-161WCW Weather Cap for Outdoor IP Cameras

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Covers & Protection

Frequently Asked Questions

Related Categories

Engineering Reading