Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
STI
SKU: KIT-6403
STI KIT-6403 Remote Horn Unit for Exit Stopper Series
- Extends audible alerts across multi-door Exit Stopper Series deployments without rewiring.
- Runs on 9VDC — matches Exit Stopper control modules for direct, compatible wiring.
- Mount remotely from the strike enclosure to reduce nuisance alarms at the access point.
$76.38 $75.99 Save $0.39The item has been added -
STI
SKU: KIT-65
STI KIT-65 Breakaway Seal Kit
- Breakaway seal strike integrates directly into TCP/IP-networked access control systems.
- Operates at 9VDC — confirm panel strike output voltage before ordering or installing.
- Fits standard door frames; supports both new construction and retrofit deployments.
$7.05 $6.99 Save $0.06The item has been added -
STI
SKU: KIT-67
STI KIT-67 Replacement Glass for STI-6700
Replacement glass for STI-6700 lock/strike systems at 9VDC
- Direct replacement component for STI-6700 strike assemblies
- Operates on 9VDC power for access control installations
- Wall-mounted design compatible with existing STI-6700 infrastructure
$12.22 $11.99 Save $0.23The item has been added -
STI
SKU: KIT-67-FR
STI KIT-67-FR French Replacement Glass for STI-6700
French-language replacement glass for STI-6700 emergency keypads
- Direct fit for STI-6700 with 9VDC wired systems and RS-232 communication
- French-language labeling for multilingual facility installations
- Wall-mounted glass panel replacement requires no system modifications
$12.22 $11.99 Save $0.23The item has been added -
STI
SKU: KIT-6702
STI KIT-6702 Tamperproof Screw Kit
- Prevents unauthorized fastener removal on STI lock and strike hardware installations.
- Compatible with HID credential-based access control infrastructure at 9VDC.
- Drop-in replacement for standard fasteners; no special tools required.
$8.91 $7.99 Save $0.92The item has been added -
STI
SKU: KIT-672
STI KIT-672 Replacement Glass for STI-6720
- Direct drop-in replacement for STI-6720 electric strike — no wiring or drilling needed.
- Operates within the existing 9VDC power envelope; no additional power supply required.
- Seats into the original mounting frame, preserving access control logic and HID reader pairing.
$14.81 $13.99 Save $0.82The item has been added -
Add to Cart The item has been addedSTI
SKU: KIT-71101A-B
STI KIT-71101A-B Stopper Station Blue Back Box & Spacer Kit
- Surface-mount back box and spacer kit supports Stopper Station installation on door frames.
- Operates at 9VDC, aligning with standard Stopper Station push-button and reader power architectures.
- Includes weather gasket and cable entry inserts sized for RJ-45, twisted-pair, or coaxial runs.
$21.04 $20.99 Save $0.05The item has been added -
STI
SKU: KIT-71101A-E
STI KIT-71101A-E Stopper Station Orange Back Box & Spacer Kit
- Provides dedicated mounting platform for 9VDC electric strike installations.
- Orange back box manages cable entry and hardware alignment in surface-mount deployments.
- Includes wall fixings; installation requires a 7mm masonry drill bit for hole prep.
$21.04 $20.99 Save $0.05The item has been added -
STI
SKU: KIT-71101A-G
STI KIT-71101A-G Stopper Station Back Box & Spacer Kit
- Supports both surface and recessed wall installations for flexible deployment.
- Includes weather gasket and cable entry inserts to seal unused connection points.
- Installs with a 7mm masonry drill bit using the wall fixings provided in the kit.
$21.04 $20.99 Save $0.05The item has been added -
Add to Cart The item has been addedSTI
SKU: KIT-71101A-R
STI KIT-71101A-R Stopper Station Red Back Box & Spacer Kit
- Red-finish back box matches STI Stopper Station line for a consistent install.
- Spacer shims let you dial in bolt clearance on surface or recessed door frames.
- Four included wall fixings and cable entry inserts speed up compliant mounting.
$21.04 $20.99 Save $0.05The item has been added -
STI
SKU: KIT-71101A-W
STI KIT-71101A-W Stopper Station White Back Box & Spacer Kit
- Purpose-built for STI Stopper Station and Stopper II series — not a universal fit.
- White finish suits office, retail, and institutional trim without custom painting.
- Includes wall anchors, fasteners, and spacer inserts for weatherproofed surface mounts.
$21.04 $20.99 Save $0.05The item has been added -
Add to Cart The item has been addedSTI
SKU: KIT-71101A-Y
STI KIT-71101A-Y Stopper Station Yellow Back Box & Spacer Kit
- Yellow finish matches STI Stopper II and Weather Stopper II housings for visual consistency.
- Supports surface and semi-flush wall configurations via included spacer inserts.
- Weather gasket included for outdoor or moisture-exposed installation environments.
$21.04 $20.99 Save $0.05The item has been added -
STI
SKU: KIT-81
STI KIT-81 Tamper-Resistant Stainless Steel Screws
- Stainless steel construction resists corrosion for reliable indoor and outdoor installations.
- Tamper-resistant design prevents unauthorized removal without specialized tools.
- Sized for 9VDC electronic lock and strike assemblies; drill 7mm pilot holes for wall mounts.
$17.04 $16.99 Save $0.05The item has been added -
STI
SKU: KIT-82
STI KIT-82 Tamper-Resistant Stainless Steel Screws
Tamper-resistant stainless steel screws for STI access control
- Corrosion-resistant stainless steel rated for indoor and outdoor use
- Tamper-resistant design secures STI lock and strike installations
- 9VDC compatible for standard access control system integration
$17.04 $16.99 Save $0.05The item has been added -
STI
SKU: KIT-900
STI KIT-900 Conduit Spacer - Clear for STI-9110
Clear conduit spacer for STI-9110 lock/strike alignment
- Compatible with STI-9110 series 9VDC lock/strike systems
- Clear construction enables visual verification during installation
- Wall-mount conduit spacer for proper door frame routing
$25.55 $24.99 Save $0.56The item has been added -
STI
SKU: KIT-900-R
STI KIT-900-R 2" Spacer Red for STI-4100/STI-4130
2" red spacer for STI-4100/STI-4130 strike alignment
- 2-inch width positions electric strike at correct door frame depth
- Compatible with STI-4100 and STI-4130 models operating at 9VDC
- Red color aids visual identification during installation and maintenance
$26.82 $25.99 Save $0.83The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.