STI KIT-65 Breakaway Seal Kit

Overview

The STI KIT-65 is a breakaway seal strike kit for networked access control systems. It operates on 9VDC and integrates with TCP/IP-enabled security platforms, delivering the locked-down control needed for professional door security where tamper-resistant hardware is specified. Deploy this where you need a dedicated strike mechanism tied into your networked access control infrastructure — not a standalone lock, but a component that takes its unlock signal from your centralized system.

Compatibility

The KIT-65 pairs with networked access control systems requiring TCP/IP integration and 9VDC strike hardware. It fits standard door frame configurations in both new construction and retrofit scenarios where network-connected strike hardware is the specification. Verify your access control panel's strike output supports 9VDC operation before ordering.

Installation Notes

Mount the strike assembly into the door frame using the standard fixing holes. Drill holes with a 7mm masonry bit where indicated by the frame positioning template. Secure the frame to the wall with the provided fixings. Position the weathering gasket (if included) over the device and secure the protective frame. For surface-mount installations, use the provided cable entry inserts to blank off unused holes. Confirm 9VDC power availability at the strike location from your access control panel output before final installation.