IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
DMP

SKU: 335

DMP 335 Interior Siren — 12VDC Alarm Audible

12VDC interior siren for intrusion alarm panel integration
- 12VDC operation wires directly to control panel audible circuits
- Wall or ceiling mounting for offices, retail, warehouses, back-of-house
- Fixed-output audible alert for occupant notification and intruder deterrence
In stock · Ships same business day

$19.00 $10.99 Save $8.01

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 364/20

DMP 364/20 1.3 Ah 12 VDC Rechargeable Battery

12 VDC 1.3 Ah rechargeable battery for access control backup power
- 1.3 Ah capacity supports temporary power during outages or transitions
- Compatible with OSDP and TCP/IP systems using HID and NFC readers
- Rechargeable design for repeated use across access control installations
Special Order · Ships in 2-3 weeks

$504.99

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 365/4

DMP 365/4 9.0 Ah 12 VDC Battery

12 VDC sealed lead-acid backup for security panels and access control
- 9.0 Amp-hour capacity for emergency standby power during mains failure
- Sealed lead-acid construction rated 12 VDC for standard security architectures
- Compatible with control panels, wireless repeaters, and auxiliary security devices
Special Order · Ships in 2-3 weeks

$249.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
DMP

SKU: 366/2

DMP 366/2 18.0 Ah VDC Lead-Acid Battery

18.0 Ah lead-acid battery backup for security and access control systems
- 18.0 Ah capacity sustains extended runtime during primary power loss
- Lead-acid chemistry for reliable operation in access control and alarm installations
- HID credential-compatible for integration into standard security architectures
In stock · Ships same business day

$258.99

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 368/10

DMP 368/10 5.0 Ah 12 VDC Lead-Acid Battery

12 VDC 5.0 Ah lead-acid backup for access control systems
- 5.0 Ah capacity sustains door control and reader operation during power loss
- 12 VDC output compatible with HID access control and security infrastructure
- Direct connection to power distribution for credential system protection
Special Order · Ships in 2-3 weeks

$335.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
DMP

SKU: 369/4

DMP 369/4 7.0 Ah 12 VDC Lead-Acid Battery

12V sealed lead-acid battery for access control backup power
- 7.0 Ah capacity runs 1A loads for ~7 hours on full charge
- Sealed design needs no maintenance—no electrolyte monitoring required
- 12 VDC output integrates directly into DMP security architectures
In stock · Ships same business day

$177.99

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 370RJ

DMP 370RJ Lightning Suppressor

Lightning suppressor for access control and security power systems
- Protects against transient surge and lightning-induced damage to equipment
- Integrates into power distribution systems for security infrastructure
- Compatible with power supply systems in access control and telecommunications
Special Order · Ships in 2-3 weeks

$112.00 $58.99 Save $53.01

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 372-500-W

DMP 372-500-W 12V 500mA Power Supply

12V 500mA regulated power supply for DMP security & access control
- 12V DC output at 500mA supports security panels and networked devices
- TCP/IP network compatible for system monitoring and remote integration
- Compact wall-mount or cabinet form factor for flexible installation
Special Order · Ships in 2-3 weeks

$14.99

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 376

DMP 376 12 Volt Wall Plug-In Power Supply

12V DC wall-plug power for DMP access control and alarm panels
- 12V DC regulated output from standard 120V AC wall outlet
- Compact wall-mount design for access control, door strikes, alarm panels
- Indoor installation in equipment rooms or panel enclosures
Special Order · Ships in 2-3 weeks

$36.40 $27.99 Save $8.41

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: FG-730

DMP FG-730 Acoustic Glassbreak Detector

Acoustic glassbreak detector for windows and glass doors
- Detects breaking glass via acoustic signature for immediate entry alerts
- Integrates with existing wired or wireless alarm system configurations
- Operates on standard alarm system voltage with HID protocol support
Special Order · Ships in 2-3 weeks

$117.00 $74.99 Save $42.01

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: HUB-M

DMP HUB-M Hold-Up Panic Button

Wired hold-up panic button for DMP intrusion panels
- Hardwired connection to DMP panic zone inputs for immediate alerts
- Fixed mounting at teller windows and service counters in retail/banking
- Compact 2" x 2.3" form factor for discrete emergency activation
Special Order · Ships in 2-3 weeks

$61.40 $32.99 Save $28.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
DMP

SKU: HUB-T

DMP HUB-T Hold-up Button Reader

TCP/IP hold-up button reader for DMP hub panic alert integration
- Wired panic button input converts to networked emergency alerts over Ethernet
- Integrates into existing DMP hub architectures without dedicated hardwired lines
- Compact 2.06" × 3.44" × 1.25" reader for retail, banking, and warehouse deployment
In stock · Ships same business day

$48.91 $39.99 Save $8.92

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: PB-52TC

DMP PB-52TC Push-Button Reed Switch with Terminal Connection

Push-button reed switch for door access control, 12V/24V dry contact
- Dry contact terminal connection integrates with DMP and third-party panels
- Reed switch mechanism operates reliably on 12V DC or 24V DC supplies
- Includes screws and spacers for straightforward installation into alarm loops
Special Order · Ships in 2-3 weeks

$10.00 $5.99 Save $4.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
DMP

SKU: PSD100

DMP PSD100 Vault Audio Detector

Audio detector for vault and perimeter intrusion monitoring
- Sound-triggered detection integrates into DMP control panel systems
- Multi-zone audio surveillance configuration for comprehensive coverage
- Compatible with standard intrusion system wiring and protocols
In stock · Ships same business day

$216.50 $112.99 Save $103.51

Add to Cart
The item has been added
Compare

Out of stock
ELK Products

SKU: ELK-319KF4

ELK Products 4 Button Keyfob 319 Series 319Kf4

4-button wireless keyfob for ELK 319 Series access control
- Four programmable buttons trigger multiple control functions remotely
- Wireless encrypted transmission integrates with ELK panels and readers
- Compact portable design uses CR2032 battery for convenient carry
Special Order · Ships in 2-3 weeks

$34.99

Add to Cart
The item has been added
Compare

Out of stock
ELK Products

SKU: ELK-06120

ELK Products ELK-06120 ELK Security Accessory

6V 12Ah backup battery for ELK security control panels
- 12Ah capacity at 20-hour discharge rate for extended outages
- Cabinet-mount design fits standard ELK security system installations
- Weighs 4.09 lbs, compact enough for professional panel deployments
Special Order · Ships in 2-3 weeks

$23.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

DMP 335 Interior Siren — 12VDC Alarm Audible

DMP 364/20 1.3 Ah 12 VDC Rechargeable Battery

DMP 365/4 9.0 Ah 12 VDC Battery

DMP 366/2 18.0 Ah VDC Lead-Acid Battery

DMP 368/10 5.0 Ah 12 VDC Lead-Acid Battery

DMP 369/4 7.0 Ah 12 VDC Lead-Acid Battery

DMP 370RJ Lightning Suppressor

DMP 372-500-W 12V 500mA Power Supply

DMP 376 12 Volt Wall Plug-In Power Supply

DMP FG-730 Acoustic Glassbreak Detector

DMP HUB-M Hold-Up Panic Button

DMP HUB-T Hold-up Button Reader

DMP PB-52TC Push-Button Reed Switch with Terminal Connection

DMP PSD100 Vault Audio Detector

ELK Products 4 Button Keyfob 319 Series 319Kf4

ELK Products ELK-06120 ELK Security Accessory

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading