IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Axis

SKU: 5901-471

Axis T93C 80mm Extension Kit - 5901-471

80mm extension for T93C housing to mount telephoto lenses up to 75mm
- Fits AXIS Q1659 55–250mm zoom lens with 380mm total assembly length
- Built-in sunshield and front window reduce glare in outdoor high-contrast scenes
- Extends T93C10 housing for long-range surveillance and perimeter monitoring
Special Order · Ships in 2-3 weeks

$135.04 $130.99 Save $4.05

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5901-421

Axis T93C Wall and Pole Conduit Back Box - 5901-421

Aluminum outdoor enclosure for wall or pole mounting with Axis cameras
- Aluminum construction resists corrosion in outdoor surveillance deployments
- Accommodates power supplies and connection boxes inside protected enclosure
- Wall and pole mount options for flexible installation (pole straps separate)
Special Order · Ships in 2-3 weeks

$237.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5900-271

Axis T93F10 Outdoor Housing IP66 - 5900-271

IK10 polymer housing for P13/Q16 cameras in extreme outdoor conditions
- IK10 impact-resistant polymer shields against vandalism and forceful damage
- IP66 sealed construction blocks dust and water ingress in all-weather operation
- Operates -40°C to 45°C with 24V AC or 12-24V DC power flexibility
Special Order · Ships in 2-3 weeks

$274.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5900-281

Axis T93F20 Outdoor Housing IP66 - 5900-281

IP66 outdoor housing with IK10 impact resistance for P13/Q16 cameras
- IK10 rated to survive 20-joule direct impacts and vandalism attempts
- IP66/NEMA 4X sealing blocks rain, dust, and high-pressure washdowns year-round
- PoE IEEE 802.3af powered; operates -40°C to 45°C in harsh environments
In stock · Ships same business day

$274.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01185-001

Axis T94B02D Pendant Kit Black - 01185-001

Pendant mount for Axis dome cameras with 1.5" NPS thread
- 3/4" threaded pipe support integrates with existing ceiling infrastructure
- Compatible with M20, M31-LV/-LVE, M30-V/-WV dome camera series
- Black matte finish blends into modern ceiling and office environments
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5801-861

Axis T94B03L Recessed Mount Bullet Cameras - 5801-861

Recessed aluminum mount for discreet bullet camera installation in drop ceilings
- Fits AXIS M2025/M2026 and Companion Bullet cameras in suspended ceiling spaces
- Aluminum construction with complete mounting hardware kit included
- Indoor recessed design keeps surveillance infrastructure hidden from view
Special Order · Ships in 2-3 weeks

$91.74 $88.99 Save $2.75

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5504-921

Axis T94D02S Curved Mount Bracket White 10 pcs - 5504-921

Curved mount brackets for Axis P39xx cameras on non-flat surfaces, pack of 10
- Tool-free installation with integrated hardware for quick multi-camera setups
- Plastic construction rated IK10 for wall and pendant mounting indoors
- Compatible with Axis P3904-R, P3905-R, and P3915-R camera models
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-881

Axis T94F01D Pendant Kit Accessory - 5503-881

Ceiling or pipe-mount pendant kit for compact dome cameras indoors
- Mounts to AXIS T91A brackets or 1.5" NPT/NPS threaded pipe
- Integrated cable pathway keeps network cabling organized and protected
- RJ45 coupler included for easy network connection and extension
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01445-001

Axis T94J01A Wall Mount Grey - 01445-001

Wall mount for Axis PTZ cameras, impact-resistant aluminum, indoor/outdoor
- Impact-resistant aluminum construction handles vibration and thermal stress from motorized pan-tilt operation
- M25 (3/4") conduit entry points route power and network cables through protective rigid pipes
- Rated for indoor and outdoor environments with urban gray finish that blends into architectural backgrounds
In stock · Ships same business day

$282.46 $273.99 Save $8.47

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5505-091

Axis T94M01D Outdoor Pendant Mount Kit - 5505-091

Outdoor pendant mount for Q3505-VE cameras on 1.5" NPS pipe
- IP67-rated, weather-resistant housing withstands rain and UV exposure
- Pendant design suspends camera from above for downward sight lines
- Direct fit to standard 1.5" NPS threaded pipes; works with T91A67 mounts
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5901-341

Axis T94N01G Stainless Steel Pole Mount - 5901-341

Stainless steel pole mount for PTZ cameras, fits 60–400mm poles
- IK10 impact rating withstands 20 joules of directed force without damage
- Three stainless steel straps span 2.4–15.7 inch pole diameters without adapters
- Sealing gaskets at cable entry block moisture and insects in outdoor sites
In stock · Ships same business day

$233.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02076-001

Axis T94N02D Pendant Kit Pole Mount - 02076-001

Pendant pole mount for Axis panoramic cameras with 1.5" NPS threads
- 1.5" NPS threaded brackets fit standard pole infrastructure without adapters
- Compatible with Axis P4705-PLVE and P4707-PLVE panoramic camera models
- Pendant form factor allows flexible mounting angles for optimal coverage positioning
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01172-001

Axis T94P01L Recessed Mount for M55 Series - 01172-001

Recessed mount for M55 series cameras, indoor/outdoor rated
- Metal construction with 3/4" (M25) conduit hole for cable routing
- UL-approved and air-handling spaces compliant for regulated environments
- Flush-mounted design integrates with AXIS M55 Series surveillance cameras
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-591

Axis T94Q01F Ceiling-and-Column Mount - 5507-591

Dual ceiling/column mount for Axis box cameras with post-install swivel
- Powder-coated aluminum resists corrosion in outdoor and salt-spray environments
- Single mount handles both ceiling/soffit and column/parapet orientations
- Integrated weatherproof cable routing protects connectors from moisture and UV
In stock · Ships same business day

$141.23 $136.99 Save $4.24

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5506-671

Axis T94U02S Mounting Bracket for Q3505-SVE - 5506-671

Stainless steel bracket with weatherproof gasket for Q3505-SVE outdoor mounting
- Pre-installed gasket seals against moisture and contaminants in outdoor environments
- Stainless steel construction resists corrosion in harsh surveillance installations
- Precision-fitted design for Axis Q3505-SVE camera secure positioning and alignment
Special Order · Ships in 2-3 weeks

$206.18 $199.99 Save $6.19

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5801-911

Axis T94V01S Mounting Bracket Q36 Series - 5801-911

Mounting bracket for AXIS Q36 Series cameras with weather-resistant construction
- Designed specifically for Q36 Series network cameras with straightforward installation
- Weather-resistant materials built to withstand diverse indoor and outdoor environments
- Includes mounting bracket and all hardware needed for quick deployment
Special Order · Ships in 2-3 weeks

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis T93C 80mm Extension Kit - 5901-471

Axis T93C Wall and Pole Conduit Back Box - 5901-421

Axis T93F10 Outdoor Housing IP66 - 5900-271

Axis T93F20 Outdoor Housing IP66 - 5900-281

Axis T94B02D Pendant Kit Black - 01185-001

Axis T94B03L Recessed Mount Bullet Cameras - 5801-861

Axis T94D02S Curved Mount Bracket White 10 pcs - 5504-921

Axis T94F01D Pendant Kit Accessory - 5503-881

Axis T94J01A Wall Mount Grey - 01445-001

Axis T94M01D Outdoor Pendant Mount Kit - 5505-091

Axis T94N01G Stainless Steel Pole Mount - 5901-341

Axis T94N02D Pendant Kit Pole Mount - 02076-001

Axis T94P01L Recessed Mount for M55 Series - 01172-001

Axis T94Q01F Ceiling-and-Column Mount - 5507-591

Axis T94U02S Mounting Bracket for Q3505-SVE - 5506-671

Axis T94V01S Mounting Bracket Q36 Series - 5801-911

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading