IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Axis

SKU: 5801-801

Axis T8611 SFP Single-Mode Fiber Transceiver - 5801-801

Single-mode SFP transceiver for fiber runs up to 10km
- 1310nm wavelength with LC.LX connector for long-distance Ethernet
- Hot-swappable SFP module integrates into Axis devices without downtime
- Industrial-grade single-mode fiber eliminates copper cabling over distance
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5801-821

Axis T8613 SFP Module 1000BASE-T Transceiver - 5801-821

Gigabit SFP transceiver for Axis network expansion via RJ-45
- 1000 Mbps data rate with 1000BASE-T Ethernet connectivity
- SFP form factor fits compact installations in Axis devices
- Plug-and-play setup requires no configuration or tools
Special Order · Ships in 2-3 weeks

$115.45 $111.99 Save $3.46

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5026-431

Axis T8640 DIN Rail Clip - 5026-431

Compact DIN rail clip for Axis devices on standard 35mm rail
- Mounts Axis cameras and devices to 35mm DIN rail systems
- Quick installation design minimizes setup time in control rooms
- Industrial-grade construction withstands vibration in demanding environments
Special Order · Ships in 2-3 weeks

$47.41 $45.99 Save $1.42

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5026-411

Axis T8640 Wall Mount Bracket - 5026-411

Wall mount bracket for Axis T8640 coax-to-IP adapter
- Fits T8640 adapter base or device unit with no additional hardware
- Interior or exterior wall mounting with environmentally resistant construction
- Integrated cable routing keeps coax, Ethernet, and power organized
In stock · Ships same business day

$29.89 $28.99 Save $0.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01211-001

Axis T90D20 IR-LED Illuminator PoE - 01211-001

IR illuminator for Axis cameras, 36–144m range, PoE+ powered
- Four interchangeable lenses (10°–80°) match beam angle to camera FOV
- Reaches 144 meters IR distance for large perimeter and vehicle coverage
- IP66/IK09 rated aluminum housing, −50°C to +50°C operating range
In stock · Ships same business day

$519.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01212-001

Axis T90D30 IR-LED Illuminator AC/DC - 01212-001

IR illuminator 70–350m range, four interchangeable lenses, IK09 vandal-rated
- Four beam angles (10°–80°) let you dial coverage from narrow spot to wide flood
- Reaches 350 meters in darkness; operates -50°C to +50°C for extreme climates
- IK09 impact-resistant aluminum housing rated IP66 for outdoor/industrial use
Special Order · Ships in 2-3 weeks

$928.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01213-001

Axis T90D30 IR-LED Illuminator PoE - 01213-001

PoE+ IR illuminator with 70–350m range and swappable beam angles
- Four interchangeable lenses (10°, 35°, 60°, 80°) adapt coverage from distant perimeters to near zones
- PoE+ powered—no separate power cables or conduit runs needed on network camera deployments
- IP66/IK09 aluminum housing rated -50°C to +50°C for outdoor and extreme climates
In stock · Ships same business day

$928.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01217-001

Axis T90D35 White LED Illuminator AC/DC - 01217-001

White LED illuminator with 4 lens angles, 35–180m range, IP66/IK09
- Swap between 10°, 35°, 60°, 80° lenses tool-free to match your coverage zone
- 12/24 V DC or AC input eliminates separate power supply in most installs
- IP66 weatherproof, IK09 impact-resistant housing rated −50°C to 50°C
In stock · Ships same business day

$928.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5017-027

Axis T91A02 DIN Rail Clip 77mm - 5017-027

77mm DIN rail clip for quick mounting of Axis encoders
- Fits AXIS Q7401, P8221, and 7701 devices with secure positioning
- Quick-install design reduces setup time and labor complexity
- Durable construction rated IK10 for demanding installations
Special Order · Ships in 2-3 weeks

$14.42 $13.99 Save $0.43

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5503-971

Axis T91A27 Pole Mount Bracket 10-Pack - 5503-971

10-pack pole mount brackets for IP cameras with 1/4"-20 tripod threading
- Mount 10 cameras across multiple locations with universal tripod-threaded compatibility
- Indoor/outdoor rated construction handles pole installations in diverse environments
- Bulk packaging reduces per-unit cost for large-scale surveillance deployments
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01474-001

Axis T91A33 Lighting Track Mount 4-Pack - 01474-001

4-pack black track mounts for universal 3-circuit lighting systems
- Universal compatibility with 3-circuit lighting track systems
- Black powder-coated steel construction, 4 mounts per pack
- Lightweight design simplifies installation on linear trunking
Special Order · Ships in 2-3 weeks

$97.56 $96.99 Save $0.57

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-781

Axis T91A6 Weatherproof Pipe Seal Cable Entry - 5503-781

Weatherproof pipe seal for outdoor cable entries, −40°C to +60°C
- Blocks water, dust, and insects at wall mounts, pole mounts, and conduit terminations
- Durable elastomer with UV and salt resistance for coastal and industrial sites
- Reusable design survives multiple insertion cycles; fits 4–10 mm cable bundles
In stock · Ships same business day

$13.39 $12.99 Save $0.40

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01446-001

Axis T91B57 Pole Mount Urban Grey - 01446-001

Aluminum pole mount for 4"–16" diameters with stainless steel straps
- Fits poles 100–410mm without adapters; single mount covers most installations
- 1450mm stainless steel straps resist corrosion in coastal and industrial sites
- TX30 interface integrates with Axis T91G61, T91H61, and T98A cabinet series
In stock · Ships same business day

$174.22 $168.99 Save $5.23

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5506-691

Axis T91F67 Marine-Grade Pole Mount Bracket - 5506-691

Marine-grade SS316L pole mount for Q35-SLVE cameras, 4"–16" poles
- SS316L stainless steel construction resists corrosion in coastal and high-moisture environments
- Accommodates pole diameters from 100–410mm with 1,450mm strap for flexible positioning
- TX30 screw interface allows tool-free installation and adjustment on-site
Special Order · Ships in 2-3 weeks

$174.22 $168.99 Save $5.23

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01149-001

Axis T91M47 Pole Mount Bracket - 01149-001

Pole mount for outdoor PoE midspans and network switches
- Mounts outdoor switches and midspans to poles without wall penetration
- 802.3af PoE powered—signal and power via single Ethernet run
- Outdoor-rated construction for exposed environments and weather exposure
In stock · Ships same business day

$65.39 $64.99 Save $0.40

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5901-471

Axis T93C 80mm Extension Kit - 5901-471

80mm extension for T93C housing to mount telephoto lenses up to 75mm
- Fits AXIS Q1659 55–250mm zoom lens with 380mm total assembly length
- Built-in sunshield and front window reduce glare in outdoor high-contrast scenes
- Extends T93C10 housing for long-range surveillance and perimeter monitoring
Special Order · Ships in 2-3 weeks

$135.04 $130.99 Save $4.05

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis T8611 SFP Single-Mode Fiber Transceiver - 5801-801

Axis T8613 SFP Module 1000BASE-T Transceiver - 5801-821

Axis T8640 DIN Rail Clip - 5026-431

Axis T8640 Wall Mount Bracket - 5026-411

Axis T90D20 IR-LED Illuminator PoE - 01211-001

Axis T90D30 IR-LED Illuminator AC/DC - 01212-001

Axis T90D30 IR-LED Illuminator PoE - 01213-001

Axis T90D35 White LED Illuminator AC/DC - 01217-001

Axis T91A02 DIN Rail Clip 77mm - 5017-027

Axis T91A27 Pole Mount Bracket 10-Pack - 5503-971

Axis T91A33 Lighting Track Mount 4-Pack - 01474-001

Axis T91A6 Weatherproof Pipe Seal Cable Entry - 5503-781

Axis T91B57 Pole Mount Urban Grey - 01446-001

Axis T91F67 Marine-Grade Pole Mount Bracket - 5506-691

Axis T91M47 Pole Mount Bracket - 01149-001

Axis T93C 80mm Extension Kit - 5901-471

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading