IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300NBW

Hanwha SBP-300NBW IP66 Installation Box, White

IP66 weatherproof box for Hanwha cameras in outdoor sites
- IP66 rating shields against dust and high-pressure water jets
- Steel and aluminum frame with silicone gaskets for thermal cycling
- Compact 185×221×94.3mm footprint at 3.4kg for tight installations
In stock · Ships same business day

$300.00 $224.99 Save $75.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SHD-1408FW

Hanwha SHD-1408FW Ceiling Flush Mount

Ceiling flush mount for Hanwha IP cameras with clean, recessed look
- Fits 13+ Hanwha models across XND, QNV, and HCV series
- White polycarbonate construction blends seamlessly with standard ceilings
- Nearly flush design eliminates visible protrusions for professional spaces
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02688-001

Axis A1210-B Top Cover Enclosure - 02688-001

Dust and splash-resistant enclosure for A1210-B door controller
- Full protective cover shields controller from dust, moisture, and debris
- RJ-45 Ethernet and relay terminals accessible without removing cover
- Tool-free mechanical mounting fits A1210-B controller precisely
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02212-001

Axis TF1901-RE 360-Degree Swivel Mount 4-Pack - 02212-001

360° swivel mounts for thermal & standard sensors, IP66 rated, 4-pack
- Full 360-degree rotation adjusts viewing angle post-install without relocating
- IP66-rated metal construction resists water spray and dust in outdoor deployments
- Compatible with F2105-RE, F2135-RE, P1280-E, and FA1080-E sensor units
In stock · Ships same business day

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 03148-001

Axis Camera Station Cloud Storage - 03148-001

30-day cloud backup for Axis cameras with multi-region redundancy
- 720p rolling 30-day retention across geographically distributed data centers
- Native integration with Axis Camera Station and NVR systems via web interface
- Off-site redundancy protects against hardware failure and on-site incidents
In stock · Ships same business day

$107.21 $103.99 Save $3.22

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5506-151

Axis P5624-E/P5635-E Smoked Dome Cover - 5506-151

Smoked dome cover for P5624-E/P5635-E PTZ cameras with UV protection
- Smoked polycarbonate with scratch and chemical resistant coating
- UV and moisture resistant construction for outdoor deployments
- Tool-free installation, no additional mounting hardware required
Special Order · Ships in 2-3 weeks

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01621-001

Axis P9106-V Clear Dome Protective Enclosure - 01621-001

Clear dome enclosure for P9106-V with anti-scratch coating
- Clear acrylic with hard coating resists scratching in high-traffic areas
- Rubber gaskets seal against dust and moisture, IP65 rated
- 2-unit pack with gaskets included; P9106-V compatible only
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01182-001

Axis RJ12 Plug Shielded 10-Pack

Shielded RJ12 connectors for Axis security systems—10-pack
- Electromagnetic shielding reduces interference in surveillance installations
- RJ12 connectors for Axis cameras, access control, and network devices
- 10-piece pack covers multiple installations and system upgrades
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5506-561

Axis T8415 Installation Charger Adaptor 12V 1A - 5506-561

12V/1A charger adaptor for AXIS T8415 wireless installation tool
- 12V 1A output keeps the T8415 wireless installation tool charged on-site
- Compact form factor fits easily in technician toolkit for field deployments
- Axis-engineered adaptor built for reliable performance during installations
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300LMW

Hanwha SBP-300LMW Parapet Mount White

Aluminum parapet mount for roofline camera placement, 1 1/2" female thread
- Aluminum construction resists corrosion from salt spray and UV for outdoor roofline installations
- 1 1/2" female threaded connection accepts standard ball mounts and adapters without reducers
- White finish blends with modern rooflines and light-colored building exteriors
In stock · Ships same business day

$395.00 $295.99 Save $99.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-301HMW2

Hanwha SBP-301HMW2 Hanging Mount, White

Lightweight aluminum ceiling mount for Hanwha dome and turret cameras
- PF 1 1/2" thread connects to QNV and SBP series cameras across generations
- 197g aluminum construction minimizes load on ceiling anchors and resists corrosion
- Operates -50°C to +60°C and 0–100% humidity for indoor and outdoor sites
In stock · Ships same business day

$49.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBV-120GW

Hanwha SBV-120GW Back Box, White

Aluminum back box with ½" and ¾" knockouts for Hanwha cameras
- Corrosion-resistant aluminum construction rated for outdoor and indoor use
- Pre-drilled conduit knockouts eliminate field drilling and ensure code compliance
- White powder coat finish integrates with building facades and ceiling mounts
In stock · Ships same business day

$49.00 $32.99 Save $16.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBV-160WC

Hanwha SBV-160WC Aluminum Weather Cap

Aluminum weather cap cuts glare and blocks rain for outdoor cameras
- Silver anodized aluminum resists corrosion in -50°C to 60°C conditions
- Mounts to standard camera boxes; 6.2" × 3.2" footprint fits most housings
- Reduces sun washout and lens fogging to maintain image clarity outdoors
Special Order · Ships in 2-3 weeks

$30.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPB-VAN72

Hanwha SPB-VAN72 Smoked Dome Cover

Smoked dome cover for discreet indoor/outdoor camera protection
- Tinted lens reduces glare and camera visibility for covert surveillance
- Durable construction withstands outdoor elements, dust, and debris
- Universal fit with included mounting hardware for quick installation
Special Order · Ships in 2-3 weeks

$35.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-451

Axis T91B50 Telescopic Ceiling Mount - 5507-451

Telescopic ceiling mount, 1–2m adjustable, extends to 5m with pipes
- Adjusts 1–2 meters (39–79 inches) for precise camera positioning on flat or sloped ceilings
- Extends to 5 meters (197 inches) with optional accessory pipes for high-bay installations
- Dampened swivel resists vibration and impact in active warehouse and retail environments
In stock · Ships same business day

$233.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300CMW

Hanwha SBP-300CMW Pendant Mount, White

12" aluminum pendant mount, 1 1/2" thread, white finish
- 12-inch drop length clears suspended ceilings and HVAC ducts
- 1 1/2" female thread fits most professional surveillance cameras
- Corrosion-resistant aluminum body for indoor and outdoor use
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SBP-300NBW IP66 Installation Box, White

Hanwha SHD-1408FW Ceiling Flush Mount

Axis A1210-B Top Cover Enclosure - 02688-001

Axis TF1901-RE 360-Degree Swivel Mount 4-Pack - 02212-001

Axis Camera Station Cloud Storage - 03148-001

Axis P5624-E/P5635-E Smoked Dome Cover - 5506-151

Axis P9106-V Clear Dome Protective Enclosure - 01621-001

Axis RJ12 Plug Shielded 10-Pack

Axis T8415 Installation Charger Adaptor 12V 1A - 5506-561

Hanwha SBP-300LMW Parapet Mount White

Hanwha SBP-301HMW2 Hanging Mount, White

Hanwha SBV-120GW Back Box, White

Hanwha SBV-160WC Aluminum Weather Cap

Hanwha SPB-VAN72 Smoked Dome Cover

Axis T91B50 Telescopic Ceiling Mount - 5507-451

Hanwha SBP-300CMW Pendant Mount, White

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading