Hanwha SBV-160WC Aluminum Weather Cap

The SBV-160WC is an aluminum weather cap sized for standard camera mounting boxes, built to shed rain and block direct sun exposure on outdoor box-camera installs. If a box camera and housing are already mounted to a standard junction box and the conduit entry or housing seam is exposed to weather, this cap closes that gap without swapping the whole enclosure.

Compatibility

Sized for standard mounting boxes at 6.2 in x 3.2 in (157mm x 81mm) — verify your existing box footprint matches before ordering, since the cap is not a universal fit across box sizes outside this dimension. It is finished in Ivory to match Hanwha's standard outdoor housing color, so it sits visually consistent alongside existing Hanwha box camera and housing deployments rather than standing out as a mismatched patch part.

Installation Notes

Rated for -50°C to 60°C (-58°F to 140°F) operating range, which covers both cold-climate rooftop mounts and sun-exposed south-facing walls without a separate cold-weather variant. At 0.64 lbs, it adds negligible load to the mounting box or wall anchor, so no additional structural bracing is needed at the mount point. Aluminum construction resists the corrosion that painted steel caps develop over multi-year outdoor exposure — relevant for coastal or high-humidity sites where a steel part would need earlier replacement. Wall mount type; confirm your box orientation before drilling, since the cap's fit is keyed to the box footprint, not a generic dome shape.

Pair this cap with Hanwha's outdoor camera lineup when specifying a full outdoor box camera install, and check mounts and housings for the matching junction box if you're starting a deployment from scratch. For broader planning on box camera placement and weatherproofing strategy across a site, the camera selection guide covers how enclosure and mount choices affect long-term maintenance cost.