Axis 01182-001 RJ12 Plug Shielded 10-Pack
Overview
The Axis 01182-001 is a 10-piece pack of shielded RJ12 connectors purpose-built for surveillance and access control wiring in professional installations. RJ12 plugs handle low-voltage control signals and audio connections across Axis surveillance equipment and compatible network devices. Shielding minimizes electromagnetic interference (EMI) and crosstalk — critical when running cables near AC power, conduit bundles, or RF-noisy industrial environments where unshielded connectors introduce signal dropout or noise artifacts.
Compatibility
These connectors work with Axis equipment that uses RJ12 interfaces for audio circuits, control lines, and device interconnects. Typical use cases include speaker connections on Axis intercoms and public address systems, trigger/relay wiring on access control integration modules, and audio input/output on camera models with integrated microphones or two-way audio. Verify your specific Axis device pinout and cable gauge before ordering — RJ12 is a standard interface, but pin assignments vary by application.
Installation Notes
RJ12 plugs are terminated onto 6-conductor shielded cable using a standard RJ12 crimp tool. The shielded design requires a proper shield-to-chassis ground connection at both ends to be effective — a floating shield degrades EMI rejection. Ensure adequate strain relief and avoid sharp bends that damage the cable jacket or expose internal pairs. In outdoor or damp environments, consider weatherproof RJ12 boots or heat-shrink over the connector to prevent corrosion and water intrusion into the mated pair.
What's in the Box
- 10x RJ12 Plug Shielded connectors
