IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Hanwha

SKU: SBV-136BW

Hanwha SBV-136BW Waterproof Aluminum Back Box

IP66 waterproof aluminum back box for outdoor Hanwha cameras
- IP66 rating shields connections from rain, dust, and high-pressure jets
- Aluminum construction resists corrosion in coastal and wet environments
- Knockout cable panels allow tool-free customization without drilling
In stock · Ships same business day

$49.00 $32.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CBXSB

Hikvision CBXSB Conduit Base, Black

Aluminum conduit base for Hikvision cameras, 9.9 lbs capacity
- Aluminum alloy construction resists corrosion in outdoor and coastal environments
- Supports up to 9.9 lbs, suitable for compact domes and fixed-lens turrets
- Black finish integrates into architectural backgrounds without visual clutter
In stock · Ships same business day

$30.00 $23.99 Save $6.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5700-911

Axis P33-V Dome Cover Kit IP66 - 5700-911

IP66 protective dome cover for Axis P33-V series cameras
- IP66 rating shields against rain, snow, dust, and salt spray
- Precision optics maintain full resolution and IR transmission
- Tool-free mounting; no power, configuration, or adapters needed
In stock · Ships same business day

$103.08 $99.99 Save $3.09

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBO-126B

Hanwha SBO-126B Aluminum Backbox for Bullet Cameras

Aluminum backbox for Hanwha bullet cameras; IP67 weather & corrosion protection
- Corrosion-resistant aluminum construction rated IP67 for coastal and humid climates
- Integrated cable routing and pre-engineered mounting for Hanwha bullet cameras
- Wall, soffit, or pole-mount compatible; IK10 impact resistance for secure outdoor install
In stock · Ships same business day

$49.00 $32.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5502-401

Axis P33 Mounting Bracket for Junction Boxes - 5502-401

Ceiling box mount for P33, M30, P32 cameras—no custom drilling
- Works with 4" square/octagon and single/double-gang electrical boxes
- Compatible with AXIS P33-V, P33-LV, select M30 and P32 models
- Indoor use in offices, retail, and warehouse ceilings
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02107-001

Axis TQ3103-E Weather Shield Kit - 02107-001

Pendant weather shield for Axis Q38 cameras in wet, high-impact outdoor zones
- Hemispherical polycarbonate dome blocks rain, snow, and spray without power draw
- Impact-resistant construction absorbs strikes from debris and accidental contact
- IP65-rated pendant mount with optical clarity maintained through minor dust/condensation
In stock · Ships same business day

$115.45 $111.99 Save $3.46

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300HM6

Hanwha SBP-300HM6 Aluminum Hanging Mount

Aluminum pendant mount for 10+ Hanwha camera models, ceiling-ready
- Lightweight aluminum construction resists sagging in overhead installations
- Compatible with SNV, SCV, PNV, XNV series cameras plus SBP-300 brackets
- Silver finish blends discretely into drop ceilings and structural elements
In stock · Ships same business day

$49.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR501M1-W

i-PRO WV-QSR501M1-W Wall Mount Bracket 1.5 NPT

White wall mount bracket with 1.5" NPT for dome camera installation
- 1.5" NPT thread standard with ANSI male connector for secure fitting
- Wall-mounted form factor in white finish for discrete surveillance setup
- Professional-grade construction designed for i-PRO dome camera systems
Special Order · Ships in 2-3 weeks

$136.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-991

Axis P12 Camera Mounting Bracket 5-Pack - 5503-991

19-inch rack mount brackets for Axis P12 cameras, 5-pack
- Five brackets per package fit standard EIA racks for organized multi-camera deployments
- Engineered specifically for Axis P12 series cameras with consistent alignment
- Commercial and light industrial rated construction for indoor equipment rooms
In stock · Ships same business day

$65.39 $64.99 Save $0.40

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5506-551

Axis T8415 Installation Tool Battery 12V 3.4Ah - 5506-551

12V 3.4Ah battery for AXIS T8415 wireless installation tool
- 12V 3.4Ah capacity keeps the T8415 running through full workdays
- IP65-rated construction withstands field conditions and frequent charging
- Purpose-built compatibility ensures optimal performance with T8415 tool
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-091

Axis T91A06 Pipe Adapter 3/4-1.5" - 5503-091

3/4" NPT to 1.5" NPS adapter for AXIS T91A pendant brackets
- Converts 3/4" NPT pipe to 1.5" NPS thread without cutting or rethreading
- Hand-tight screw-on design installs in minutes with no special tools required
- Metal construction spans entire T91A bracket family for mixed-infrastructure sites
In stock · Ships same business day

$14.42 $13.99 Save $0.43

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-361

Axis T94B02D Pendant Kit White - 5507-361

Pendant mount for Axis dome cameras; 1.5" NPS and 3/4" NPT threads
- Hangs from ceiling infrastructure with 1.5" NPS or 3/4" NPT threaded pipe
- Fits Axis M20, M31-LV, M30-V, and Companion series dome cameras
- White finish blends into drop ceilings and indoor office environments
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5502-431

Axis 5502-431 Pendant Mount Kit

Pendant and rack mount kit for flush ceiling installation of Axis compact domes
- Dual configuration supports vertical cable drop or rack positioning for flexible deployment
- Recessed design minimizes ceiling profile; rigid construction isolates vibration from HVAC
- Complete kit includes brackets, fasteners, and mounting template for quick installation
In stock · Ships same business day

$61.24 $60.99 Save $0.25

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR504F-W

i-PRO WV-QSR504F-W ISO Female White Wall Mount Bracket

White wall mount bracket for PTZ cameras with ISO female 1.5"Rp
- ISO female 1.5"Rp connection mates directly with compatible i-PRO PTZ housings
- Wall-mount design positions cameras on vertical surfaces without ceiling cuts
- White finish blends into office and institutional environments with minimal visual impact
In stock · Ships same business day

$85.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
2N

SKU: 02249-001

2N TU6004-E Interconnect Cable 1m 4-Pack - 02249-001

1m Axis F-2nd Gen interconnect cables, 4-pack with weather-resistant jacket
- Four 1-meter cables per pack for modular Axis F-2nd Gen camera systems
- TU6004-E connector with IP65 rating handles indoor and outdoor installations
- Spare cables reduce downtime during sensor module swaps and field testing
In stock · Ships same business day

$62.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5506-891

Axis 5506-891 RJ45 Male To Male Adapter

RJ45 male-to-male adapter for Axis PTZ and Q6000-E systems
- Direct cable-to-cable connection eliminates splicing or crimping
- Extends cable runs and reconfigures network layouts in tight spaces
- White compact form factor for discrete installation in surveillance setups
Special Order · Ships in 2-3 weeks

$17.52 $16.99 Save $0.53

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SBV-136BW Waterproof Aluminum Back Box

Hikvision CBXSB Conduit Base, Black

Axis P33-V Dome Cover Kit IP66 - 5700-911

Hanwha SBO-126B Aluminum Backbox for Bullet Cameras

Axis P33 Mounting Bracket for Junction Boxes - 5502-401

Axis TQ3103-E Weather Shield Kit - 02107-001

Hanwha SBP-300HM6 Aluminum Hanging Mount

i-PRO WV-QSR501M1-W Wall Mount Bracket 1.5 NPT

Axis P12 Camera Mounting Bracket 5-Pack - 5503-991

Axis T8415 Installation Tool Battery 12V 3.4Ah - 5506-551

Axis T91A06 Pipe Adapter 3/4-1.5" - 5503-091

Axis T94B02D Pendant Kit White - 5507-361

Axis 5502-431 Pendant Mount Kit

i-PRO WV-QSR504F-W ISO Female White Wall Mount Bracket

2N TU6004-E Interconnect Cable 1m 4-Pack - 02249-001

Axis 5506-891 RJ45 Male To Male Adapter

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading