Accessories
Sub categories
Showing Results for Accessories
-
Lifesafety Power
SKU: FPO75-B100C4D8PE2M/T4-C
Lifesafety Power FPO75-B100C4D8PE2M/T4-C FPO75-B100C4D8PE2M/T4-C
- Delivers 2A at 12V and 2A at 24V simultaneously from a single 75W unit.
- Prewired E2M configuration with tie-wrap assembly cuts on-site labor and wiring errors.
- Supports 4 door outputs and 8 auxiliary outputs for Mercury platform deployments.
$1,150.00 $755.99 Save $394.01 -
Lifesafety Power
SKU: FPO75-B100C4PD8PE4S
Lifesafety Power FPO75-B100C4PD8PE4S 2DR Sw House System/Lock Pow
- Delivers 2A at 12V and 2A at 24V simultaneously from a single 75W supply.
- Four fused lock outputs and eight fused auxiliary outputs enable per-circuit fault isolation.
- Ships with E4S steel enclosure (14H×12W×4.5D in) for wall or electrical-closet mounting.
$926.00 $608.99 Save $317.01 -
Lifesafety Power
SKU: FPO75-B100C8D8E2-3DM2
Lifesafety Power FPO75-B100C8D8E2-3DM2 D8 Single FPO Buss/Flex Ca
- Connects FPO75 main frame to individual camera or circuit outputs for modular power distribution.
- Compatible with FPO75-250 combo units and FPO75-B100 base frame configurations.
- Includes quick guides for FPO75-250, C4/C8, and B100 frame configs to confirm termination fit.
$883.00 $579.99 Save $303.01 -
Lifesafety Power
SKU: FPO75-B100D8PE1M
Lifesafety Power FPO75-B100D8PE1M 75W Dual Voltage 120 VAC 8 Aux
- 75W switched-mode supply powers up to eight aux outputs from a single 120 VAC feed.
- Dual voltage input eliminates step-down transformers in mixed-voltage cabinet installs.
- Centralized distribution consolidates cameras, locks, and readers without per-device supplies.
$624.00 $409.99 Save $214.01 -
Lifesafety Power
SKU: FPO75-C4D8E1
Lifesafety Power FPO75-C4D8E1 75W Svps 4 Lock Control Out; 8AUX
- 75W SVPS capacity drives 4 lock outputs and 8 aux channels from a single unit.
- Supervised design includes backup power and tamper monitoring for fault reporting.
- E1 cabinet-rated; 12V DC aux feeds readers, relays, and sensors across multi-door sites.
$508.00 $333.99 Save $174.01 -
Lifesafety Power
SKU: FPO75-C4D8E2X
Lifesafety Power FPO75-C4D8E2X 75W (12 or 24V) 4 lock outputs 8
- Selectable 12V or 24V output eliminates stocking separate supplies per site.
- Four independent lock outputs eliminate daisy-chaining across separate door circuits.
- Eight auxiliary outputs power sensors, keypads, and indicators from one 75W unit.
$861.00 $565.99 Save $295.01 -
Lifesafety Power
SKU: FPO75-C4E1
Lifesafety Power FPO75-C4E1 4 Door Access Control 4 Lock Outputs
- Four individually fused 3A outputs isolate door circuits, preventing one fault from affecting others.
- 75W budget supports four EM locks or solenoid strikes at 12V or 24V without auxiliary boost.
- DIN-rail E1 enclosure mounts directly in access control cabinets, eliminating extra surface hardware.
$456.00 $299.99 Save $156.01 -
Lifesafety Power
SKU: FPO75-C4PD8PE1
Lifesafety Power FPO75-C4PD8PE1 75W Svps 4 Lock Control Out; 8AUX
- 75W total capacity supports 4 supervised lock control outputs from a single cabinet.
- 8 auxiliary outputs allow monitoring of relays, sensors, and secondary devices.
- Built-in supervision detects wiring faults, power loss, and tamper before doors fail.
$468.00 $307.99 Save $160.01 -
Lifesafety Power
SKU: FPO75-C8E1
Lifesafety Power FPO75-C8E1 FPO75-C8E1
- Eight independently fused 3A outputs isolate faults, preventing one failed device from killing the bus.
- Supports 12V or 24V DC distribution up to 75W total across locks, readers, and PoE injectors.
- E1 cabinet mounts in wall or rack environments, suiting IDF closets and comms room deployments.
$511.00 $335.99 Save $175.01 -
Lifesafety Power
SKU: FPO75-D8E1V
Lifesafety Power FPO75-D8E1V 2DR Vertx system power 6A/12V 75W
$556.00 $365.99 Save $190.01 -
Lifesafety Power
SKU: FPO75-D8E4V
Lifesafety Power FPO75-D8E4V FPO75-D8E4V
- Distributes 12V DC across 8 independent fused outputs, protecting each circuit individually.
- 75W / 6A capacity offloads door strikes and sensors from your main camera or NVR PSU.
- E4V enclosure (24×20×4.5 in) mounts on 19-in rack rails or wall in any equipment room.
$772.00 $507.99 Save $264.01 -
Lifesafety Power
SKU: FPO75-D8PW1M
Lifesafety Power FPO75-D8PW1M 75W Single Voltage 120 VAC 8 Auxil
- 75W capacity powers up to 8 auxiliary outputs from a single centralized source.
- 120 VAC input integrates directly into standard circuits without additional conversion.
- Eight parallel ports eliminate daisy-chained adapters in camera and access control runs.
$1,206.00 $792.99 Save $413.01 -
Lifesafety Power
SKU: FPO75/150-2D8E4M
Lifesafety Power FPO75/150-2D8E4M 225W Dual Voltage 120 VAC 16
$1,089.00 $715.99 Save $373.01 -
Lifesafety Power
SKU: FPO75/150-C4D8E1
Lifesafety Power FPO75/150-C4D8E1 Four Door Access Control 1224V
- Dual 12V and 24V rails power mixed-voltage locks and readers from one chassis.
- 75W budget supports four doors; single DIN-rail or wall-mount chassis cuts cabinet clutter.
- Continuous-duty passive cooling suits 24/7 access control without active fan maintenance.
$804.00 $528.99 Save $275.01 -
Lifesafety Power
SKU: FPO75/150-C8D8E6S-VZ03
Lifesafety Power FPO75/150-C8D8E6S-VZ03 225W(12V&24V)8lock/aux ou
- Delivers 225W across simultaneous 12V and 24V rails from a single chassis.
- Eight independent lock/auxiliary outputs allow separate circuit assignment per device.
- Sealed, filtered enclosure resists dust and thermal cycling in harsh environments.
$3,210.00 $2,320.99 Save $889.01 -
Lifesafety Power
SKU: FPO75/75-2D8PE2
Lifesafety Power FPO75/75-2D8PE2 150W Dual Voltage 120 VAC 16 Au
- 150W dual-voltage output (75W+75W) powers mixed 12V DC and 24V AC device circuits.
- 8 supervised auxiliary outputs protect individual channels by isolating shorted loads.
- Wall-mount steel enclosure accepts 120V AC input for centralized, conditioned power.
$731.00 $480.99 Save $250.01
Accessories
Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.
Deployment Considerations
- Environmental protection and weather resistance
- Mounting stability and load support
- Power and voltage compatibility
- Cable management and termination quality
- Compliance with local safety standards






