IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Ubiquiti

SKU: UACC-ADAPTER-AC-210W

Ubiquiti UACC-ADAPTER-AC-210W AC power ad 210W @ 54VDC for PoE

210W 54V DC adapter for Ubiquiti UniFi PoE switches
- 210W @ 54V DC output with universal 100–240V AC input
- 1.5 m pre-attached cable with 5.5 x 2.1 mm DC connector
- Operates 0–40°C; compact 190 x 86 x 26 mm form factor
Special Order · Ships in 2-3 weeks

$132.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UACC-ADAPTER-DBAC

Ubiquiti UACC-ADAPTER-DBAC G4 Doorbell Pro AC Power Adapter

7-meter AC adapter for G4 Doorbell Pro with 5V/2A output
- 23 ft cable length decouples power source from doorbell mount point
- 5V DC, 2A output handles peak current draw without voltage sag
- 100–240V AC input works globally with 50/60 Hz standards
In stock · Ships same business day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UACC-ADAPTER-POE-24-12W

Ubiquiti UACC-ADAPTER-POE-24-12W 12W PoE Injector 2.5 GbE

24V PoE injector with 2.5 GbE passthrough for UniFi devices
- 12W at 24V DC powers access points and managed switches over single cable
- 2.5 GbE RJ45 maintains full data bandwidth while injecting power on pins 4–8
- Global 100–240V AC input; LAN activity LED and reset button for field diagnostics
In stock · Ships same business day

$8.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UACC-ADAPTER-POE-USBC

Ubiquiti UACC-ADAPTER-POE-USBC PoE to USB-C Adapter

PoE to USB-C adapter converts 48V to 5V/2A for UniFi cameras
- Passive inline adapter with integrated GbE pass-through for power and data
- 5V/2A USB-C output powers compatible UniFi Protect G4 cameras
- Compact polycarbonate housing rated ±8kV ESD; -10 to 40°C operating range
In stock · Ships same business day

$75.67 $53.99 Save $21.68

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UACC-ADAPTER-PT-120W

Ubiquiti UACC-ADAPTER-PT-120W 120W Power TransPort Adapter

120W Power TransPort adapter for UISP infrastructure deployment
- 27V DC / 4.44A output with universal 100–240V AC input (50–60Hz)
- Compatible with UISP Box, Power, Router, and Switch devices
- Compact design with ±10kV air ESD/EMP protection and global certifications
Special Order · Ships in 2-3 weeks

$31.99

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UACC-ADAPTER-RJ45-USBC-10GE

Ubiquiti UACC-ADAPTER-RJ45-USBC-10GE Plug-and-play, Ethernet

USB-C to 10GbE adapter for laptops and field workstations
- 10 Gbps Ethernet over USB Type-C, no drivers required
- macOS 14.2+, Windows 7–11, and Linux compatible
- Compact polycarbonate and aluminum design, 160g with activity LED
Special Order · Ships in 2-3 weeks

$235.99

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UACC-ADAPTER-RJ45-USBC-5GE

Ubiquiti UACC-ADAPTER-RJ45-USBC-5GE Ethernet adapter with USB-C

USB-C to 5GbE Ethernet adapter for laptops and edge devices
- 5 Gigabit Ethernet over single USB Type-C port, no drivers required
- Compact aluminum and polycarbonate design (83.4 × 25 × 16.5 mm) for portability
- Compatible with macOS 14.2+, Windows 7–11, and Linux systems
Special Order · Ships in 2-3 weeks

$75.00 $51.99 Save $23.01

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UACC-AE

Ubiquiti UACC-AE UFIBER ACTIVE ETHERNET

Fiber-to-copper media converter for UniFi wireless systems, 1 Gbps
- Converts 1G SFP fiber to GbE RJ45, enabling fiber uplink on standard APs
- Powered by passive PoE (16–57V) from UniFi switches, no external supply needed
- Operates -40 to 60°C with UV-stabilized enclosure for outdoor deployments
Special Order · Ships in 2-3 weeks

$29.99

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UACC-AI-360-JB

Ubiquiti UACC-AI-360-JB Tamper-resistant junction box

Tamper-resistant junction box for Ubiquiti AI 360 camera systems
- Flat surface, pole, and pendant mounting options for flexible deployment
- IPX6-rated aluminum and polycarbonate enclosure withstands outdoor conditions
- 3/4" conduit entrances on side and rear panels for standard wiring integration
Special Order · Ships in 2-3 weeks

$62.82 $52.99 Save $9.83

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UACC-AI-360-JB-W

Ubiquiti UACC-AI-360-JB-W Tamper-resistant junction box for AI

Tamper-resistant junction box for Ubiquiti AI camera installations
- Outdoor-rated enclosure protects cable connections in exposed mounting
- Compatible with Ubiquiti AI camera systems for integrated deployments
- Durable construction at 1.6 lb for standard field installation
Special Order · Ships in 2-3 weeks

$79.00 $52.99 Save $26.01

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UACC-AI-KEY-RM

Ubiquiti UACC-AI-KEY-RM 1U rack that supports up to 3 AI Keys

1U rack mount for up to 3 Ubiquiti AI Keys
- Consolidates three AI Key devices in standard 19-inch rack space
- Aluminum alloy construction weighs only 0.9 lb for easy installation
- Integrates with UniFi and UISP ecosystems for centralized deployment
Special Order · Ships in 2-3 weeks

$126.67 $93.99 Save $32.68

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UACC-AI-PORT-RM

Ubiquiti UACC-AI-PORT-RM 1U rack-mount for up to 6 AI Ports

Compact 1U rack mount consolidates up to 6 AI Ports
- Holds 6 AI Port devices in single 1U rack unit for dense deployments
- SGCC steel and polycarbonate construction rated -20 to 40°C operating range
- Works with UniFi and UISP AI Port devices in standard 19-inch racks
Special Order · Ships in 2-3 weeks

$70.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UACC-AI-PRO-ENHANCER

Ubiquiti UACC-AI-PRO-ENHANCER IR LED, Floodlight & Radar Accessory

IR, floodlight & radar enhancer for AI Pro cameras up to 40m range
- 40m infrared range with 600 lm 5700K floodlight for dark-condition detail
- Radar motion detection to 35m vehicles / 20m persons, 110° horizontal FOV
- 15W power draw, −30 to 50°C operating range, NDAA & FCC certified
In stock · Ships same business day

$295.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UACC-AI-PRO-ENHANCER-W

Ubiquiti UACC-AI-PRO-ENHANCER-W IR LED Illuminator & Radar Accessory

IR + white-light illuminator with radar motion detection for AI Pro cameras
- Dual illumination modes—infrared for covert low-light capture, white-light floodlight for visible deterrence
- Radar motion detection reduces false alerts from weather and lighting changes independent of video
- Hardware-integrated accessory pairs directly to compatible cameras; no separate wiring or configuration needed
In stock · Ships same business day

$194.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UACC-AI-THETA-ANGLE MOUNT-CAMERA

Ubiquiti UACC-AI-THETA-ANGLE MOUNT-CAMERA Angled Ceiling Mount

Angled ceiling mount for AI Theta—horizontal coverage instead of wasted floor views
- Tilts camera toward horizon for corridor and perimeter surveillance with floor-level detail
- Aluminum alloy construction with stainless steel hardware locks angle in place reliably
- Designed for AI Theta standard lenses; verify lens type before ordering
In stock · Ships same business day

$29.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UACC-AI-THETA-AUDIO-CABLE-1M

Ubiquiti UACC-AI-THETA-AUDIO-CABLE-1M Replcmnt connects AIT

1-meter replacement audio cable for Ubiquiti AI Theta systems
- Connects AI Theta Audio microphone to hub for integrated surveillance
- 1-meter length suits ceiling and wall-mounted installations
- Proprietary Ubiquiti connector compatible with AI Theta ecosystem
In stock · Ships same business day

$38.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Ubiquiti UACC-ADAPTER-AC-210W AC power ad 210W @ 54VDC for PoE

Ubiquiti UACC-ADAPTER-DBAC G4 Doorbell Pro AC Power Adapter

Ubiquiti UACC-ADAPTER-POE-24-12W 12W PoE Injector 2.5 GbE

Ubiquiti UACC-ADAPTER-POE-USBC PoE to USB-C Adapter

Ubiquiti UACC-ADAPTER-PT-120W 120W Power TransPort Adapter

Ubiquiti UACC-ADAPTER-RJ45-USBC-10GE Plug-and-play, Ethernet

Ubiquiti UACC-ADAPTER-RJ45-USBC-5GE Ethernet adapter with USB-C

Ubiquiti UACC-AE UFIBER ACTIVE ETHERNET

Ubiquiti UACC-AI-360-JB Tamper-resistant junction box

Ubiquiti UACC-AI-360-JB-W Tamper-resistant junction box for AI

Ubiquiti UACC-AI-KEY-RM 1U rack that supports up to 3 AI Keys

Ubiquiti UACC-AI-PORT-RM 1U rack-mount for up to 6 AI Ports

Ubiquiti UACC-AI-PRO-ENHANCER IR LED, Floodlight & Radar Accessory

Ubiquiti UACC-AI-PRO-ENHANCER-W IR LED Illuminator & Radar Accessory

Ubiquiti UACC-AI-THETA-ANGLE MOUNT-CAMERA Angled Ceiling Mount

Ubiquiti UACC-AI-THETA-AUDIO-CABLE-1M Replcmnt connects AIT

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading