IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Speco Technologies

SKU: O2DB1

Speco Technologies O2DB1 2MP WiFi Video Doorbell with Face Detection

2MP WiFi doorbell with face detection and wireless chime kit
- 1920 x 1080 resolution captures visitor facial detail at entry height
- WiFi (2.4/5GHz) + PoE option eliminates hardwired cable runs
- On-camera face detection tags human subjects to reduce alert noise
In stock · Ships same business day

$598.80 $237.99 Save $360.81

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: O2I605CM

Speco Technologies O2I605CM Intensifier IP Corner Mount Camera

Corner mount IP camera with stainless steel housing for tight spaces
- 2.9mm fixed lens with wide field of view for compact installations
- Stainless steel construction resists corrosion in humid and salt-air environments
- PoE powered with ONVIF IP network connectivity for standard integration
In stock · Ships same business day

$1,131.50 $449.99 Save $681.51

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: O2I695

Speco Technologies O2I695 2MP Intensifier IP Angle Mount Camera

2MP stainless steel IP camera with image intensifier for zero-IR low-light
- 1920 × 1080 resolution, 2.9mm wide-angle lens, angle mount for walls/ceilings
- Image intensifier technology captures monochrome detail without external IR lighting
- Stainless steel housing rated for washdown and corrosive industrial environments
Special Order · Ships in 2-3 weeks

$456.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: O2VLJBB

Speco Technologies O2VLJBB Junction Box for O3VLB3

Junction box for O3VLB3 camera cable termination and routing
- Designed for O3VLB3 camera system integration in fixed deployments
- White enclosure houses cable termination and signal management
- Centralizes wiring and protects connections at mounting point
Special Order · Ships in 2-3 weeks

$39.50 $15.99 Save $23.51

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: O2VLWM

Speco Technologies O2VLWM Wall Mount for O2VLD1

White wall mount for Speco dome and turret cameras indoors/outdoors
- Compatible with O2VLD1, O3VLD1, and O2P4X camera models
- Rated for both indoor and outdoor surveillance installations
- Lightweight 1.1 lb design simplifies wall mounting and positioning
Special Order · Ships in 2-3 weeks

$43.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: O3PMT

Speco Technologies O3PMT Pole Mount used with O2P4XWM and O2VLWM

Pole mount bracket for O2P4XWM and O2VLWM outdoor camera deployment
- Designed for vertical pole mounting in perimeter security and parking areas
- Outdoor-rated construction supports fixed surveillance at elevated positions
- White housing, 15 lbs, fits standard pole installations for remote monitoring
Special Order · Ships in 2-3 weeks

$43.00 $16.99 Save $26.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: O4D6WM

Speco Technologies O4D6WM Wall Mount Bracket

Wall mount bracket for O4D6M, O8D6M, VLDT6M cameras
- Fits Speco O4D6M, O8D6M, and VLDT6M camera models
- Standard fastener-based installation for wall mounting
- Rated for both indoor and outdoor wall installations
In stock · Ships same business day

$85.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: O4JBD

Speco Technologies O4JBD Junction Box for O4D2M/VLB1TW

Junction box for O4D2M/O8D2M/VLD1TW dome cameras—centralized power & video
- Consolidates power and video signal distribution at camera mount point
- Reduces cable runs and junction points for cleaner on-site installations
- Organized termination simplifies multi-camera deployments and troubleshooting
Special Order · Ships in 2-3 weeks

$72.30 $28.99 Save $43.31

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: O5KWMT

Speco Technologies O5KWMT Wall mount for O2VLD7J and O5K1

Wall mount bracket for O2VLD7J and O5K1 cameras
- Fixed position with adjustable positioning for precise camera angle
- Rated for both indoor and outdoor wall installation environments
- White finish bracket designed for secure, stable surveillance mounting
Special Order · Ships in 2-3 weeks

$23.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: O5VLWM

Speco Technologies O5VLWM Wall Mount for VLDT5W, O4D6, O8VD1, VLD5

Wall mount for Speco VLDT5W, O4D6, O8VD1, VLD5 cameras
- Adjustable angle and elevation positioning without custom drilling
- Direct mechanical fit eliminates adapter plates and compatibility risk
- Standard fastening to building surfaces; 2.0 lbs load capacity rated
In stock · Ships same business day

$92.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: O5VLWMJ

Speco Technologies O5VLWMJ Wall Mount Bracket with Pendant Cap

Wall-mount bracket for Speco Blue cameras, indoor/outdoor
- Integrated pendant cap routes cables cleanly from wall or ceiling
- Purpose-built for Speco Blue series—no adapters needed
- White finish blends into office, retail, and commercial spaces
In stock · Ships same business day

$148.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: O5VLWMJG

Speco Technologies O5VLWMJG Wall Mount Bracket with Pendant Cap

Wall and pendant bracket for Speco Blue Series cameras, dark gray
- Dual-configuration mount switches between wall and ceiling without extra hardware
- Optimized mechanical tolerances for Blue Series cameras eliminate shimming and adapters
- Dark gray finish integrates into commercial interiors without standing out
In stock · Ships same business day

$148.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: O6MDP4

Speco Technologies O6MDP4 6MP H.265 360° Fisheye IP Camera

360° 6MP fisheye IP camera with H.265 for single-point panoramic coverage
- 6MP at 3840×2160 resolution captures full panoramic detail without blind spots
- H.265 compression cuts storage needs roughly 50% versus H.264 at equal quality
- IP67-rated, PoE-powered (802.3af under 13W) for indoor and outdoor deployment
In stock · Ships same business day

$1,477.00 $569.99 Save $907.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: O84S

Speco Technologies O84S 8MP Quad-View 360° IP Camera

360° 8MP quad-sensor IP camera, IP66/IK10, single-cable PoE+ power
- 8MP (3840×2160) quad-view eliminates blind spots across full perimeter
- H.265 compression cuts bandwidth/storage by ~50% vs H.264
- PoE+ 25W, IP66/IK10 rated, motion + line crossing + vehicle detection
In stock · Ships same business day

$3,756.50 $1,358.99 Save $2,397.51

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: P4W5D

Speco Technologies P4W5D 4CH @ 5A DC Camera Power Supply (W-12VDC

4-channel 12VDC power supply for analog and IP camera systems
- 5A per channel (20A total) supports multiple cameras from one hub
- DIN rail or wall mount for flexible integration in security installations
- Works with analog CCTV and non-PoE IP cameras without adapters
Special Order · Ships in 2-3 weeks

$151.30 $59.99 Save $91.31

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PBMRK1

Speco Technologies PBMRK1 Rack mount

19-inch rack mount for Speco equipment in server rooms
- Fits standard EIA 19-inch rack spacing in indoor cabinets
- Vertical cable management support for organized deployments
- Compatible with Speco Technologies surveillance and networking gear
Special Order · Ships in 2-3 weeks

$49.30 $20.99 Save $28.31

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Speco Technologies O2DB1 2MP WiFi Video Doorbell with Face Detection

Speco Technologies O2I605CM Intensifier IP Corner Mount Camera

Speco Technologies O2I695 2MP Intensifier IP Angle Mount Camera

Speco Technologies O2VLJBB Junction Box for O3VLB3

Speco Technologies O2VLWM Wall Mount for O2VLD1

Speco Technologies O3PMT Pole Mount used with O2P4XWM and O2VLWM

Speco Technologies O4D6WM Wall Mount Bracket

Speco Technologies O4JBD Junction Box for O4D2M/VLB1TW

Speco Technologies O5KWMT Wall mount for O2VLD7J and O5K1

Speco Technologies O5VLWM Wall Mount for VLDT5W, O4D6, O8VD1, VLD5

Speco Technologies O5VLWMJ Wall Mount Bracket with Pendant Cap

Speco Technologies O5VLWMJG Wall Mount Bracket with Pendant Cap

Speco Technologies O6MDP4 6MP H.265 360° Fisheye IP Camera

Speco Technologies O84S 8MP Quad-View 360° IP Camera

Speco Technologies P4W5D 4CH @ 5A DC Camera Power Supply (W-12VDC

Speco Technologies PBMRK1 Rack mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading