IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Pelco

SKU: XWBA

Pelco XWBA 316L Stainless Wall Bracket X-Series

316L stainless wall bracket for Pelco X-series in corrosive environments
- AISI 316L stainless steel resists saltwater, chlorine, and chemical corrosion
- Integrated cable routing simplifies installation and protects connections
- Compatible with Pelco X-series camera housings; NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks

$680.34 $500.99 Save $179.35

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: XWBTA

Pelco XWBTA X-Series Parapet Bracket 316L Stainless

316L stainless parapet bracket for Pelco X-Series in coastal/chemical environments
- AISI 316L stainless steel resists salt air and chemical exposure
- Purpose-built parapet edge mounting for Pelco X-Series cameras
- Stable base where direct wall or pole attachment is impractical
Special Order · Ships in 2-3 weeks

$293.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Potter

SKU: PSB-10

Potter PSB-10 Bulk Power Supply

Regulated 24/12VDC supply for multi-door access and surveillance
- Selectable 24VDC or 12VDC output for access readers and strike locks
- DIN rail and surface-mount compatible for flexible enclosure integration
- Works with Potter panels and third-party control systems in one unit
In stock · Ships same business day

$753.05 $561.99 Save $191.06

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Potter

SKU: PSN-1000E

Potter PSN-1000 Series Intelligent Notification Power Expander

Rack-mount notification expander for Potter access control systems
- Expands door strike, audible, and visual indicator output beyond base controller
- 18 AH battery capacity with AC drop-out support for continuous operation
- Modular design supports multi-building campuses and phased capacity growth
In stock · Ships same business day

$1,301.55 $965.99 Save $335.56

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: SDSDQAS4-064G

SanDisk SDSDQAS4-064G 64GB Industrial microSDXC Card

64GB industrial microSDXC for 24/7 IP camera & DVR surveillance
- 64GB capacity supports continuous HD/4K video recording without interruption
- Industrial-grade design rated for –25°C to 85°C operating temperature range
- Compatible with IP cameras, DVRs, NVRs, and embedded security systems
Special Order · Ships in 2-3 weeks

$45.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 006-001-14

SDC 006-001-14 1/8 X Armature Shim

1/8 inch metal shim for SDC strike armature gap alignment
- Adjusts armature spacing in SDC door strikes with HID access control
- Metal construction suits both retrofit installations and new deployments
- Works with HID credential-based access control system ecosystems
Special Order · Ships in 2-3 weeks

$9.99 $8.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 100-4

SDC 100-4 12/24VDC Solenoid Coil Controller

12/24VDC solenoid controller for HID-based access control door strikes
- Dual voltage input (12/24VDC) adapts to diverse installation power supplies
- Compatible with HID credential systems and access control platforms
- Manages solenoid coil actuation for secure door strike control in deployments
Special Order · Ships in 2-3 weeks

$114.99 $103.99 Save $11.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 400NU-L2

SDC 400NU-L2 4-Door Access Control Annunciator

4-door annunciator with HID credentials and dual-protocol networking
- Manages up to 250,000 user records across 4 entry points
- OSDP and TCP/IP connectivity for platform integration
- 24VDC wired operation for centralized access control
Special Order · Ships in 2-3 weeks

$36.99 $33.99 Save $3.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 400NU-SN

SDC 400NU-SN 4-Door Access Control Siren Controller

4-door networked controller with 250K user capacity and OSDP/TCP/IP
- Manages up to 4 doors with 250,000 user records on single 24VDC supply
- OSDP and TCP/IP protocols for integration with standard access platforms
- HID-compatible credential support for card readers and existing systems
Special Order · Ships in 2-3 weeks

$44.99 $40.99 Save $4.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 400RC433

SDC 400RC433 1-Channel Wireless Receiver Controller

1-channel wireless receiver for up to 63 doors with 250K credentials
- Manages 63 doors and 250,000 user credentials for mid-to-large facilities
- Supports DESFire, MIFARE, NFC 13.56 MHz, and 125 kHz proximity credentials
- OSDP and TCP/IP protocols integrate with enterprise access control systems
Special Order · Ships in 2-3 weeks

$119.99 $108.99 Save $11.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 400U-SN

SDC 400U-SN Access Controller with Integrated Siren

4-door controller with integrated siren for small-to-mid facilities
- Manages 250,000 user credentials on-device, no cloud lookup needed
- Fits single-gang box; OSDP and TCP/IP for flexible integration
- Built-in siren eliminates separate alarm device and wiring
In stock · Ships same business day

$55.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 400W1-433

SDC 400W1-433 4-Door Wireless Access Control Transmitter

4-door wireless access controller with 433 MHz range for multi-entry sites
- Manages up to 250,000 user profiles across 4 doors from single unit
- 433 MHz wireless transmission with 100–300 ft range, line-of-sight dependent
- OSDP + TCP/IP protocols with HID credential compatibility for existing systems
In stock · Ships same business day

$205.00 $117.99 Save $87.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 422U

SDC 422U Push Button Access Control Controller

Wired push-button controller with OSDP encryption for 24VDC access systems
- OSDP encrypted communication protects credential data between reader and controller
- Supports NFC/13.56MHz, proximity cards, and keypads on single or multi-door setups
- 24VDC hardwired operation with compact wall-mount form factor
In stock · Ships same business day

$73.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 423PU

SDC 423PU 420 Series Exit Switch Controller

OSDP exit switch controller for NFC and keypad readers, 24VDC wired
- Dual reader input accepts both NFC proximity and keypad credentials on one device
- OSDP protocol encrypts credential traffic to prevent man-in-the-middle attacks
- 2-inch form factor mounts to standard 1-gang wall plate with code-compliant signage
In stock · Ships same business day

$262.99 $251.99 Save $11.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 480-SFB

SDC 480-SFB Square Flush Recessed Access Control Box

Square flush recessed controller for HID access control over TCP/IP
- Flush recessed mount keeps installation profile clean and minimally visible
- TCP/IP network connectivity integrates with standard access management platforms
- HID-compatible credentials work with existing access control systems and readers
Special Order · Ships in 2-3 weeks

$49.99 $44.99 Save $5.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 482A2U

SDC 482A2U Single Gang Push Plate Access Control Switch

63-door controller with 250K credentials and multi-card support
- Manages up to 63 door readers from one 28VDC wired controller unit
- Accepts DESFire, MIFARE, NFC/13.56MHz, and 125kHz Prox in same reader
- OSDP encrypted protocol with TCP/IP for standard system integration
In stock · Ships same business day

$196.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Pelco XWBA 316L Stainless Wall Bracket X-Series

Pelco XWBTA X-Series Parapet Bracket 316L Stainless

Potter PSB-10 Bulk Power Supply

Potter PSN-1000 Series Intelligent Notification Power Expander

SanDisk SDSDQAS4-064G 64GB Industrial microSDXC Card

SDC 006-001-14 1/8 X Armature Shim

SDC 100-4 12/24VDC Solenoid Coil Controller

SDC 400NU-L2 4-Door Access Control Annunciator

SDC 400NU-SN 4-Door Access Control Siren Controller

SDC 400RC433 1-Channel Wireless Receiver Controller

SDC 400U-SN Access Controller with Integrated Siren

SDC 400W1-433 4-Door Wireless Access Control Transmitter

SDC 422U Push Button Access Control Controller

SDC 423PU 420 Series Exit Switch Controller

SDC 480-SFB Square Flush Recessed Access Control Box

SDC 482A2U Single Gang Push Plate Access Control Switch

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading