Lifesafety Power · FPO75-C4E1

Lifesafety Power FPO75-C4E1 4 Door Access Control

75W distributed power supply purpose-built for multi-door access control installations where independent lock circuits are non-negotiable

• Four individually fused 3A outputs isolate door circuits, preventing one fault from affecting others.
• 75W budget supports four EM locks or solenoid strikes at 12V or 24V without auxiliary boost.
• DIN-rail E1 enclosure mounts directly in access control cabinets, eliminating extra surface hardware.

Lifesafety Power · FPO75-C4PD8PE1

Lifesafety Power FPO75-C4PD8PE1 75W 4 Lock Control

75W supervised power supply (SVPS) designed to power and manage distributed access control devices—door locks, strikes, magnetic locks, and auxiliary

• 75W total capacity supports 4 supervised lock control outputs from a single cabinet.
• 8 auxiliary outputs allow monitoring of relays, sensors, and secondary devices.
• Built-in supervision detects wiring faults, power loss, and tamper before doors fail.

Lifesafety Power · FPO75-C8E1

Lifesafety Power FPO75-C8E1 FPO75-C8E1

75-watt industrial power enclosure designed to distribute regulated 12V or 24V DC power across eight independently fused outputs

• Eight independently fused 3A outputs isolate faults, preventing one failed device from killing the bus.
• Supports 12V or 24V DC distribution up to 75W total across locks, readers, and PoE injectors.
• E1 cabinet mounts in wall or rack environments, suiting IDF closets and comms room deployments.

Lifesafety Power · FPO75-D8E1V

Lifesafety Power FPO75-D8E1V 2DR Vertx system power 6A/12V 75W

75W auxiliary power supply designed for Vertx access control and security system integration

Lifesafety Power · FPO75-D8E4V

Lifesafety Power FPO75-D8E4V FPO75-D8E4V

75W auxiliary power distribution enclosure designed to feed secondary circuits in surveillance and access control systems

• Distributes 12V DC across 8 independent fused outputs, protecting each circuit individually.
• 75W / 6A capacity offloads door strikes and sensors from your main camera or NVR PSU.
• E4V enclosure (24×20×4.5 in) mounts on 19-in rack rails or wall in any equipment room.

Lifesafety Power · FPO75-D8PW1M

Lifesafety Power FPO75-D8PW1M 75W Single Voltage

75W single-voltage power supply rated for 120 VAC input, equipped with 8 auxiliary outputs

• 75W capacity powers up to 8 auxiliary outputs from a single centralized source.
• 120 VAC input integrates directly into standard circuits without additional conversion.
• Eight parallel ports eliminate daisy-chained adapters in camera and access control runs.

Lifesafety Power · FPO75/150-2D8E4M

Lifesafety Power FPO75/150-2D8E4M 225W Dual Voltage 120 VAC 16

225W dual voltage power supply designed to distribute power across distributed surveillance and access control installations

Lifesafety Power · FPO75/150-C4D8E1

Lifesafety Power FPO75/150-C4D8E1 Four Door Access Control

75W industrial power supply engineered for multi-door access control deployments requiring simultaneous 12V and 24V outputs

• Dual 12V and 24V rails power mixed-voltage locks and readers from one chassis.
• 75W budget supports four doors; single DIN-rail or wall-mount chassis cuts cabinet clutter.
• Continuous-duty passive cooling suits 24/7 access control without active fan maintenance.

Lifesafety Power · FPO75/150-C8D8E6S-VZ03

Lifesafety Power FPO75/150-C8D8E6S-VZ03 225W 12V/24V 8-Lock

225W redundant power supply designed for security installations requiring simultaneous 12V and 24V rail delivery

• Delivers 225W across simultaneous 12V and 24V rails from a single chassis.
• Eight independent lock/auxiliary outputs allow separate circuit assignment per device.
• Sealed, filtered enclosure resists dust and thermal cycling in harsh environments.

Lifesafety Power · FPO75/75-2D8PE2

Lifesafety Power FPO75/75-2D8PE2 150W Dual Voltage

150W dual voltage power supply rated for 120 VAC input, designed to provision multiple camera circuits and auxiliary loads in small-to-medium

• 150W dual-voltage output (75W+75W) powers mixed 12V DC and 24V AC device circuits.
• 8 supervised auxiliary outputs protect individual channels by isolating shorted loads.
• Wall-mount steel enclosure accepts 120V AC input for centralized, conditioned power.

Lifesafety Power · FPO75/75-3D8PE4M1

Lifesafety Power FPO75/75-3D8PE4M1 Unified Power System

150W unified power supply designed to centralize and distribute power to access control panels, card readers, electronic locks, and ancillary

• 150W unified supply centralizes power for locks, readers, and sensors in one unit.
• Switchable 12/24 VDC output supports mixed-voltage device ecosystems in retrofit sites.
• 24 auxiliary outputs reduce cabinet power supply count across distributed installations.

Lifesafety Power · HINGE-STANDOFF-KIT

Lifesafety Power HINGE-STANDOFF-KIT Hinging Standoff Kit

Mounting accessory bundle designed to simplify camera installation on surfaces requiring both fixed and articulated standoff support

• Includes 4 hinging and 4 fixed standoffs, covering both adjustable and fixed mounts.
• All hardware is sized for 6-32 fasteners, matching common camera housings and brackets.
• Mixed standoff set reduces separate hardware orders during commissioning or servicing.

Lifesafety Power · POWER-CORD-C13-6FEET-BOXED

Lifesafety Power POWER-CORD-C13-6FEET-BOXED Power Cord

6-foot IEC C13 power cord designed for power supply systems in surveillance and security installations

• 6-foot IEC C13 cord covers standard rack-to-PDU distances without extensions.
• C13 female connector mates directly with C14 male inlets on PDUs and UPS units.
• Boxed packaging supports spare inventory management in multi-rack deployments.

Lifesafety Power · RGM-D8PZ1

Lifesafety Power Rgm-D8PZ1 Empty R2U Rackdrawer

N empty 2U rackdrawer designed to organize and mount up to four Lenel access control panels on a removable backplate within a standard 19-inch rack

• Mounts up to four Lenel access control panels on a removable backplate in 2U space.
• 19" EIA-compliant form factor (19W × 3.5H × 20.5D in.) fits standard rack rails.
• Integrated lockset and wire management arm reduce tampering risk and cable strain.

Lifesafety Power · RGM-X-BOXED

Lifesafety Power RGM-X-BOXED Gemini Rack Drawer RGM-X 2U black

2U rack-mount drawer designed to integrate with Lifesafety Power Gemini power distribution systems

• Mounts in standard 19-inch racks, occupying only 2U of vertical space.
• Pull-out drawer design provides direct access to internal components during maintenance.
• Engineered for Lifesafety Power Gemini system frames; verify chassis compatibility before ordering.

Lifesafety Power · SD4-BOXED

Lifesafety Power SD4-BOXED Component Product HARNESS Dual Buss

Pre-assembled dual buss harness assembly designed for fire alarm and security control system installations

• Pre-assembled 18-inch harness eliminates field termination time in panel integration.
• AWG14 copper conductors support up to ~15A per conductor for supervision loads.
• 6-position 5.00mm pitch terminal block suits Mercury/Lenel board configurations.

Lifesafety Power · W1-BOXED

Lifesafety Power W1-BOXED Weatherized NEMA Enclosure

Weatherized NEMA-rated equipment cabinet designed to protect power distribution and auxiliary electronics in outdoor security installations

• NEMA-rated weatherized construction shields internal electronics from rain, dust, and corrosion.
• Supports DIN-rail mounted power supplies and battery backup modules for outdoor deployments.
• Suited for perimeter access points, vehicle gates, and remote camera cluster installations.

Lifesafety Power · Z-BRACKET-BOXED

Lifesafety Power Z-Bracket-Boxed Z-Bracket-Boxed

Mounting bracket designed to secure IP cameras in standard surveillance installations

• Boxed packaging protects the bracket during transit, arriving ready to install.
• Standardized mounting interface supports repeatable camera positioning across multi-camera sites.
• Designed for 24 VDC environments; verify compatibility with your specific camera model before ordering.

Middle Atlantic · 68REC-CTRL

Middle Atlantic & Plate Marked Controlled - 68REC-CTRL

Rack-mounted control module designed to provide centralized command and status for AV and IT equipment within a rack system

Middle Atlantic · ALA01

Middle Atlantic (1)ALA01 Slide Coupling

Slide coupling designed for use with Middle Atlantic rack and enclosure systems

Middle Atlantic · LP-62201

Middle Atlantic 0U 16A 208V - LP-62201

0U vertical power distribution unit designed for rack-mount deployments where space is at a premium

Middle Atlantic · LP-62300

Middle Atlantic 0U 24A 208V C13/C19 - LP-62300

Vertical 0U rack-mountable power distribution unit designed for high-density IT environments

Middle Atlantic · 6ACT8A

Middle Atlantic 1 1/2 Gang 8A Activate Plate - 6ACT8A

1½-gang, 8-amp switched outlet plate designed for deployment within the Middle Atlantic Activate power management ecosystem

Middle Atlantic · 6S1

Middle Atlantic 1 1/2 Gang Sing REC PLT 1 - 6S1

1½-gang single receptacle plate designed for integration into Middle Atlantic rack enclosures and furniture systems

Middle Atlantic · 6S2

Middle Atlantic 1 1/2 Gang Sing REC PLT 1 - 6S2

1.5-gang single receptacle plate designed for integration into Middle Atlantic rack enclosures and furniture systems

Middle Atlantic · 6DEC

Middle Atlantic 1 1/2-GANG Decora Plate - 6DEC

1½-gang Decora-style plate designed to fill blank panel space in Middle Atlantic rack enclosures and furniture while accommodating standard

Middle Atlantic · 6DP

Middle Atlantic 1 1/2-GANG Duplex Plate - 6DP

1½-gang duplex plate designed for use in Middle Atlantic rack enclosures and furniture systems where a standard duplex outlet needs a clean, finished

Middle Atlantic · 6SER

Middle Atlantic 1 1/2-GANG Ortronics Seri - 6SER

1½-gang faceplate insert designed to populate open module positions within Middle Atlantic's Ortronics Series structured wiring and A/V

Middle Atlantic · 6TRAC

Middle Atlantic 1 1/2-GANG Ortronics Trac - 6TRAC

1½-gang Ortronics Trac fitting designed for structured cable routing and patch organization inside rack enclosures

Middle Atlantic · 15FFHA

Middle Atlantic 1 1/2-GANG Pass Through H - 15FFHA

1.5-gang horizontal pass-through fitting designed to route cables cleanly through rack enclosure panels without sharp bends or abrasion points

Middle Atlantic · 6MAAP

Middle Atlantic 1 1/2-GNG Extron Maap PLT - 6MAAP

1.5-gang architectural adapter plate designed to mount Extron MAAP (Multimedia Architecture Adapter Plate) modules into Middle Atlantic rack and

Middle Atlantic · 6MAAP2A

Middle Atlantic 1 1/2GNG Extr MAAP/2A PLT - 6MAAP2A

1.5-gang extruder plate designed for the MAAP/2A (Modular Accessible Audio/Video Panel) rackmount system

Middle Atlantic · 125CRR

Middle Atlantic 1 1/4IN Conduit Reduc RNG - 125CRR

1-1/4 inch conduit reducing ring designed to seal and finish conduit entry points on rack enclosures and cable management panels

Middle Atlantic · 1BHA

Middle Atlantic 1 Gang Bottom Housing ASS - 1BHA

Single-gang bottom housing assembly designed for use with Middle Atlantic modular rackmount enclosure systems

Middle Atlantic · 8S1

Middle Atlantic 1 Gang Sing REC PLT 1.4 O - 8S1

1-gang single receptacle plate designed for integration into Middle Atlantic rack furniture, credenzas, and cable management systems

Middle Atlantic · 8S2

Middle Atlantic 1 Gang Sing REC PLT 1.6 O - 8S2

Single-gang receptacle plate designed for use with Middle Atlantic rack enclosures and cable management systems