IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Pelco

SKU: IRN30B9AS00

Pelco IRN30B9AS00 940nm Covert IR Illuminator

940nm covert IR illuminator with 80m range and narrow 9° beam
- 940nm wavelength invisible to human eye for true covert operation
- 9° narrow beam angle concentrates light for focused long-range coverage
- Stainless steel housing rated for outdoor use; 24 Vac or 12/24 Vdc input
Special Order · Ships in 2-3 weeks

$1,004.50 $738.99 Save $265.51

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN30BWAS00

Pelco IRN30BWAS00 White-Light 30° Stainless Illuminator

White-light 30° stainless illuminator for full-color medium-range surveillance
- 30° focused beam angle concentrates light on specific surveillance zones
- White-light LED output captures full-color video in directional coverage areas
- Stainless steel housing resists corrosion in coastal and industrial environments
Special Order · Ships in 2-3 weeks

$621.64 $457.99 Save $163.65

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN60A8AS00

Pelco IRN60A8AS00 850nm IR 60-Deg Illuminator

850nm IR illuminator, 60° beam, stainless steel housing
- 850nm infrared wavelength delivers covert nighttime coverage with no visible light
- 60-degree beam angle covers wide areas like parking lots and building perimeters
- Stainless steel construction resists corrosion in coastal, marine, and food processing
Special Order · Ships in 2-3 weeks

$692.35 $509.99 Save $182.36

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN60A9AS00

Pelco IRN60A9AS00 940nm Covert IR Illuminator

940nm covert IR illuminator with 60° beam for wide outdoor coverage
- 60-meter range with invisible 940nm wavelength for undetected nighttime surveillance
- 60-degree beam angle covers parking lots and building perimeters from single mount
- 100–240 Vac direct mains connection; NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks

$1,159.25 $852.99 Save $306.26

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN60AWAS00

Pelco IRN60AWAS00 White-Light IR Illuminator 60 Degree

60° white-light IR illuminator with stainless steel housing for surveillance
- 60° beam angle covers wide areas like parking lots, yards, and building facades
- White-light LED with 850 nm wavelength integrates with Pelco camera systems
- Stainless steel Type A housing resists corrosion in coastal and marine environments
Special Order · Ships in 2-3 weeks

$749.71 $551.99 Save $197.72

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN60B9AS00

Pelco IRN60B9AS00 940nm Covert IR Illuminator

940nm covert IR illuminator with 60° beam and 60m range
- 940nm wavelength produces zero visible LED glow for discreet surveillance
- 60-degree wide beam covers large outdoor areas from single mounting point
- Stainless steel housing rated for outdoor use; 24 Vac or 12/24 Vdc power
Special Order · Ships in 2-3 weeks

$1,004.50 $738.99 Save $265.51

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN60BWAS00

Pelco IRN60BWAS00 White-Light 60° IR Illuminator

White-light 60° IR illuminator with stainless steel housing
- 850 nm white-light LED for full-color nighttime imaging
- 60° beam angle covers wide areas like parking lots and perimeters
- Stainless steel resists corrosion in coastal and marine environments
Special Order · Ships in 2-3 weeks

$621.64 $457.99 Save $163.65

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IWM-GY

Pelco IWM-GY Wall Mount Dome Gray

Indoor wall mount bracket for Pelco dome cameras, gray finish
- Direct flush mount to walls—no adapter plate needed, cuts install labor
- Modular design accepts PA402 pole and CM400 corner adapters on-site
- IK10 vandal rating and NDAA Section 889 compliant for government use
In stock · Ships same business day

$80.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IWM-SR

Pelco IWM-SR Wall Mount Dome Light Gray

Wall mount for Pelco dome cameras with modular adapter support
- Direct surface mount on interior walls with light gray finish
- Compatible with PA402 pole and CM400 corner adapters for flexible positioning
- NDAA Section 889 compliant for regulated security deployments
Special Order · Ships in 2-3 weeks

$105.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IWM-SW RB

Pelco IWM-SW RB Wall Mount for Sarix IE Pendant

OEM wall mount for Sarix IE large pendant cameras, light gray finish
- Surface-mount installation when ceiling mounting isn't an option
- Genuine Pelco replacement part for Sarix IE pendant bodies
- Factory-tested reboxed stock, 1-year manufacturer coverage
Special Order · Ships in 2-3 weeks

$109.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IWM-SW

Pelco IWM-SW Wall Mount Dome White

Indoor white wall mount for Pelco dome cameras, accepts pole/corner adapters
- Surface wall mount with modular PA402 pole and CM400 corner adapter support
- White finish blends into office and retail interiors without visual clutter
- NDAA Section 889 compliant for government and federal procurement projects
In stock · Ships same business day

$77.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IWM24-GY

Pelco IWM24-GY Indoor Wall Mount with 24V Supply

Gray indoor wall mount with integrated 24V power supply for Pelco domes
- Built-in 24V DC power eliminates separate supply units and outlet routing
- Designed for Pelco dome cameras requiring 24V input at wall locations
- Gray finish blends into commercial and industrial interior installations
Special Order · Ships in 2-3 weeks

$328.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IWPWPC

Pelco IWPWPC Waterproof RJ45 Connector Cover

Waterproof RJ45 cover for Sarix IWP cameras—maintains IP66 rating outdoors
- IP66-rated polymer seal prevents water ingress at Ethernet connection
- Designed exclusively for Sarix IWP series—ensures proper bore fit and seal
- Operating range –10° to 55°C handles coastal and industrial wet environments
In stock · Ships same business day

$10.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: JBOX-1201

Pelco JBOX-1201 Junction Box Dual-Head Cameras

Junction box for dual-head camera cable management and termination
- Structured cable entry and routing designed for dual-head installations
- Supports multiple cable runs plus supplemental power feed connections
- Compatible with Pelco camera systems; NDAA Section 889 compliant
In stock · Ships same business day

$105.00 $77.99 Save $27.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: KF-MAGMOUNT2

Pelco KF-MAGMOUNT2 Klick Fast Magnetic Mount

Tool-free magnetic mount for Pelco Klick Fast cameras on steel
- Snap-on attachment to ferrous metal surfaces without fasteners or tools
- Quick reposition and remove for temporary surveillance and event deployments
- Compatible with Pelco camera systems using Klick Fast interface standard
Special Order · Ships in 2-3 weeks

$44.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: LD-SP8-CLR

Pelco LD-SP8-CLR Clear Dome Bubble for SPDE8

Clear replacement dome for Pelco SPDE8 PTZ cameras with full IR transmission
- Optical-grade clear material maintains image clarity and infrared performance
- Designed as scheduled maintenance consumable for SPDE8-series deployments
- Compatible with Pelco SPDE8 PTZ dome camera systems only
Special Order · Ships in 2-3 weeks

$80.00 $58.99 Save $21.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Pelco IRN30B9AS00 940nm Covert IR Illuminator

Pelco IRN30BWAS00 White-Light 30° Stainless Illuminator

Pelco IRN60A8AS00 850nm IR 60-Deg Illuminator

Pelco IRN60A9AS00 940nm Covert IR Illuminator

Pelco IRN60AWAS00 White-Light IR Illuminator 60 Degree

Pelco IRN60B9AS00 940nm Covert IR Illuminator

Pelco IRN60BWAS00 White-Light 60° IR Illuminator

Pelco IWM-GY Wall Mount Dome Gray

Pelco IWM-SR Wall Mount Dome Light Gray

Pelco IWM-SW RB Wall Mount for Sarix IE Pendant

Pelco IWM-SW Wall Mount Dome White

Pelco IWM24-GY Indoor Wall Mount with 24V Supply

Pelco IWPWPC Waterproof RJ45 Connector Cover

Pelco JBOX-1201 Junction Box Dual-Head Cameras

Pelco KF-MAGMOUNT2 Klick Fast Magnetic Mount

Pelco LD-SP8-CLR Clear Dome Bubble for SPDE8

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service