IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Pelco

SKU: IMV-WMJB

Pelco IMV-WMJB Weatherproof Junction Box for SRXV-WMP

IP66 sealed junction box for SRXV-WMP wall mounts outdoors
- PoE++ (802.3bt Class 4) support for high-power camera payloads
- IP66-equivalent sealed enclosure protects RJ-45 connectors from moisture
- Matched footprint eliminates adapters and custom fabrication on install
In stock · Ships same business day

$62.33 $45.99 Save $16.34

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRH10H9A

Pelco IRH10H9A 940nm Covert IR Illuminator

940nm covert IR illuminator with 10° beam for invisible surveillance
- 940nm wavelength produces zero visible glow for truly covert operation
- 10-degree narrow beam concentrates output for long-range, single-point coverage
- Multi-voltage input (12 Vdc, 24 Vdc, 24 Vac) integrates with Pelco systems
Special Order · Ships in 2-3 weeks

$550.94 $405.99 Save $144.95

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRH30H8A

Pelco IRH30H8A High-Power 850nm IR Illuminator

850nm IR illuminator with 84m range and 30° beam for night surveillance
- 84-meter illumination range extends coverage far beyond camera onboard IR
- Narrow 30-degree beam angle concentrates output for maximum long-distance reach
- Accepts 12/24 Vdc or 24 Vac power input for flexible field deployment
Special Order · Ships in 2-3 weeks

$325.50 $239.99 Save $85.51

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRH30HWA

Pelco IRH30HWA White-Light LED Illuminator 30° 60m

White-light LED illuminator with 30° beam and 60m range for color nighttime surveillance
- White-light LED captures full-color detail at night—clothing, vehicle, and skin tones for identification
- 30° narrow beam concentrates output 60 meters for clear mid-to-long-range imaging without scatter
- Multi-voltage input (12 Vdc, 24 Vdc, 24 Vac) integrates into existing surveillance power infrastructure
Special Order · Ships in 2-3 weeks

$409.54 $301.99 Save $107.55

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRH30L8A

Pelco IRH30L8A 850nm IR Illuminator 30-Degree 60m

850nm IR illuminator with 30° narrow beam for 60m night vision range
- 60-meter effective range with narrow 30-degree beam concentration
- 850nm wavelength optimized for camera sensitivity with minimal visible glow
- Flexible 12/24 Vdc or 24 Vac power input for easy integration
Special Order · Ships in 2-3 weeks

$254.79 $194.99 Save $59.80

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRH60H8A

Pelco IRH60H8A High-Power 850nm IR Illuminator 56m

850nm IR illuminator with 60° beam angle and 56m range
- 40% higher output than standard IRH60L8A for extended coverage
- 60-degree beam angle matches wide-angle camera fields of view
- Supports 12 Vdc, 24 Vdc, or 24 Vac input for flexible installation
Special Order · Ships in 2-3 weeks

$325.50 $239.99 Save $85.51

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRH60HWA

Pelco IRH60HWA White-Light LED Illuminator 60-Deg 40m

White-light LED illuminator with 60° beam and 40m range for color night video
- 60-degree beam angle covers wide areas for parking lots, perimeters, and loading docks
- 40-meter maximum range with white-light LED for full-color imaging in complete darkness
- Accepts 12 Vdc, 24 Vdc, or 24 Vac for flexible installation in existing systems
Special Order · Ships in 2-3 weeks

$409.54 $301.99 Save $107.55

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRH60L8A

Pelco IRH60L8A 850nm IR Illuminator 60-Degree

850nm IR illuminator with 60° beam angle for 40m night vision reach
- 60-degree beam angle matches wide-angle cameras without hotspots or vignetting
- 40-meter effective range with 850nm wavelength for low-light surveillance
- Dual voltage input (12/24 Vdc or 24 Vac) with NDAA Section 889 compliance
Special Order · Ships in 2-3 weeks

$254.79 $187.99 Save $66.80

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRHPS120

Pelco IRHPS120 120Vac Power Supply for IR Camera Housing

120Vac to 24Vac power supply for IR camera housings, North American only
- 30W regulated 24Vac output powers heater, blower, illuminator, and camera
- 120Vac 50/60Hz input with NDAA Section 889 compliance for regulated deployments
- Indoor installation near camera location with 1-year manufacturer coverage
Special Order · Ships in 2-3 weeks

$131.13 $96.99 Save $34.14

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRHPS230

Pelco IRHPS230 Power Supply 230Vac IR Housing

230 Vac power supply for Pelco IR housings in Europe and Asia-Pacific
- Converts 230 Vac 50/60 Hz to 24 Vac at 30 W for simultaneous IR, heat, blower
- Single integrated supply for Pelco IR camera housings with IP66 rated enclosure
- Sized for commercial surveillance in regions outside North America with 230 Vac standard
Special Order · Ships in 2-3 weeks

$131.13 $96.99 Save $34.14

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN10A9AS00

Pelco IRN10A9AS00 940nm Covert IR Illuminator

940nm covert IR illuminator with 140m range and 10° narrow beam
- 940nm wavelength produces zero visible LED glow for truly covert operation
- 10-degree narrow beam concentrates IR energy to 140m for telephoto cameras
- 100–240 Vac direct mains input eliminates need for separate DC power supply
Special Order · Ships in 2-3 weeks

$1,159.25 $852.99 Save $306.26

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN10B9AS00

Pelco IRN10B9AS00 940nm Covert IR Illuminator

940nm covert IR illuminator with 140m range for invisible perimeter surveillance
- 940nm wavelength delivers zero visible glow for completely undetected operation
- 9-degree narrow beam concentrates IR output across 140-meter maximum range
- Stainless steel housing with 24 Vac or 12/24 Vdc input for outdoor durability
Special Order · Ships in 2-3 weeks

$1,004.50 $738.99 Save $265.51

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN30A8AS00

Pelco IRN30A8AS00 850nm IR Stainless Illuminator

850nm covert IR illuminator in stainless steel for secure perimeters
- 850nm invisible-to-eye wavelength with 30° focused beam for night surveillance
- Stainless steel housing resists corrosion in coastal and chemical environments
- NDAA Section 889 compliant for regulated government and security procurement
Special Order · Ships in 2-3 weeks

$692.35 $509.99 Save $182.36

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN30A9AS00

Pelco IRN30A9AS00 940nm Covert IR Illuminator

940nm covert IR illuminator with 80m range, direct AC power
- Invisible 940nm wavelength for true covert surveillance operation
- 30-degree beam angle covers moderate areas up to 80 meters
- Plugs directly into 100–240 Vac mains—no external supply needed
Special Order · Ships in 2-3 weeks

$1,159.25 $852.99 Save $306.26

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN30AWAS00

Pelco IRN30AWAS00 White-Light 30° IR Illuminator

White-light 30° IR illuminator with stainless steel housing for coastal surveillance
- 850 nm white-light LED delivers full-color nighttime vision in moderate-range applications
- Stainless steel A-Type construction resists corrosion in marine and food-processing environments
- 30° beam angle suits driveways, entrances, and corridors; NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks

$749.71 $551.99 Save $197.72

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IRN30B8AS00

Pelco IRN30B8AS00 850nm IR Illuminator Stainless

850nm IR illuminator, 30° beam, stainless steel for corrosive environments
- 850nm wavelength with 30-degree beam angle for corridor and perimeter coverage
- Stainless steel housing resists corrosion in coastal, marine, and chemical settings
- 24 Vac or 12–24 Vdc input for flexible power integration with surveillance systems
Special Order · Ships in 2-3 weeks

$565.62 $415.99 Save $149.63

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Pelco IMV-WMJB Weatherproof Junction Box for SRXV-WMP

Pelco IRH10H9A 940nm Covert IR Illuminator

Pelco IRH30H8A High-Power 850nm IR Illuminator

Pelco IRH30HWA White-Light LED Illuminator 30° 60m

Pelco IRH30L8A 850nm IR Illuminator 30-Degree 60m

Pelco IRH60H8A High-Power 850nm IR Illuminator 56m

Pelco IRH60HWA White-Light LED Illuminator 60-Deg 40m

Pelco IRH60L8A 850nm IR Illuminator 60-Degree

Pelco IRHPS120 120Vac Power Supply for IR Camera Housing

Pelco IRHPS230 Power Supply 230Vac IR Housing

Pelco IRN10A9AS00 940nm Covert IR Illuminator

Pelco IRN10B9AS00 940nm Covert IR Illuminator

Pelco IRN30A8AS00 850nm IR Stainless Illuminator

Pelco IRN30A9AS00 940nm Covert IR Illuminator

Pelco IRN30AWAS00 White-Light 30° IR Illuminator

Pelco IRN30B8AS00 850nm IR Illuminator Stainless

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service