IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Hanwha

SKU: SLA-2M2400Q

Hanwha SLA-2M2400Q 2MP Lens Module for PNM-9000VQ

2MP modular lens for PNM-9000VQ with four focal lengths, 135° wide view
- Choose 2.4mm, 2.8mm, 3.6mm, or 6.0mm at purchase to match coverage needs
- 2MP 1/2.8" CMOS with 135.4° horizontal FOV in 2.4mm for wide-area monitoring
- IR-cut filter for day/night operation; 3-year warranty included
In stock · Ships same business day

$85.00 $63.99 Save $21.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SLA-2M2800Q

Hanwha SLA-2M2800Q 2MP Interchangeable Lens Module

2MP lens module with 4 selectable focal lengths for PNM-9000VQ
- Choose from 2.4mm, 2.8mm, 3.6mm, or 6.0mm without swapping cameras
- 1/2.8" CMOS sensor with 107.4° horizontal FOV at standard 2.8mm
- Day/night capable with IR-corrected optics for 24/7 monitoring
In stock · Ships same business day

$85.00 $63.99 Save $21.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPB-VAW12

Hanwha SPB-VAW12 Smoked Come Cover for Q/L Fixed Domes

Smoked dome cover for Q/L Series fixed vandal domes
- Aluminum construction rated for outdoor environments
- Smoked finish obscures lens while maintaining image clarity
- Compatible with Q/L Series Fixed Lens Vandal Dome cameras
In stock · Ships same business day

$25.00 $16.99 Save $8.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPM-4210

Hanwha SPM-4210 Network I/O Box

Compact network I/O box with 4 alarm ports, audio I/O, and PoE power
- 4 configurable alarm ports with 12V DC output (50mA max) for sensors and relays
- Selectable mic or line-level audio input; line-level output for two-way audio
- 10/100BASE-T Ethernet with PoE power; draws 4.5W maximum via IEEE 802.3af
In stock · Ships same business day

$265.00 $198.99 Save $66.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: DS-1603ZJ-POLE-P

Hikvision DS-1603ZJ-POLE-P Vertical Pole Mount

Vertical pole mount for Hikvision cameras, 67–127mm poles, 10kg capacity
- Aluminum alloy construction resists corrosion in outdoor and coastal environments
- Adjustable clamp fits standard poles 2.64–5 inches without drilling or modification
- Rated −40°C to 60°C; supports single and dual-camera surveillance setups
In stock · Ships same business day

$144.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: RCM-DE4A

Hikvision RCM-DE4A In-Ceiling Mounting Bracket for DS-2DE4 PTZ

In-ceiling mount for DS-2DE4 PTZ cameras with magnetic quick-fit
- Magnetic mounting eliminates fasteners for faster ceiling installation
- Steel construction with surface treatment resists corrosion in humid spaces
- 8.8 lb capacity supports full DS-2DE4 Series camera weight and cabling
In stock · Ships same business day

$48.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QAT502-W

i-PRO WV-QAT502-W Gangbox Adapter White

Flush-mount gangbox adapter for i-PRO cameras with PoE power
- Fits 2-gang or 4-gang electrical boxes for recessed, in-wall installation
- PoE (802.3af/802.3at) eliminates separate power supply and transformer
- White finish blends with indoor ceilings and walls; HTTPS encryption capable
In stock · Ships same business day

$68.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR503-W

i-PRO WV-QSR503-W 4-Screw Dome Mount Bracket White

4-screw dome bracket for ceiling/wall mounting up to 11 lbs
- 4-screw pattern distributes load across four anchor points for stability
- Mounts on ceiling or wall surfaces without requiring additional brackets
- White finish integrates with standard commercial ceiling installations
In stock · Ships same business day

$61.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01561-001

Axis 01561-001 Digital Microphone

Omnidirectional digital mic with 100m range for Axis devices
- Omnidirectional pickup captures audio equally from all directions
- 100-meter transmission range reaches distant monitoring zones
- Ring power from compatible Axis devices eliminates separate supply
In stock · Ships same business day

$162.88 $157.99 Save $4.89

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02861-001

Axis 02861-001 Network I/O Relay Module

Network I/O relay module with PoE power and dual-protocol integration
- 2 alarm inputs, 5 outputs, and 1 Form C relay for legacy equipment control
- PoE Class 4 operation eliminates separate power infrastructure requirements
- 3 digital I/O ports support sensors and environmental monitoring integration
In stock · Ships same business day

$356.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5505-521

Axis ACI Conduit Adapter 1/2" U-Shape 20mm 5 pcs - 5505-521

U-shaped 20mm conduit adapter for P37X/Q35X cameras, 5-pack
- 1/2" (20mm) U-shaped design routes cables cleanly at camera entry
- Pack of 5 adapters covers multi-camera installations cost-effectively
- Official Axis accessory engineered for P37X and Q35X series fit
Special Order · Ships in 2-3 weeks

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5800-901

Axis Connector A 2-Pin 3.81mm Straight 10-Pack

Male 2-pin 3.81mm straight connectors for Axis cameras (10-pack)
- 2-pin male connector with 3.81mm pitch fits Axis network cameras and legacy surveillance equipment
- Straight form factor maintains stable connections across I/O port replacements and expansions
- 10-piece package supports cost-effective maintenance and spare inventory across multiple systems
Special Order · Ships in 2-3 weeks

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5505-291

Axis Connector A 4-Pin 3.81 Straight In/Out 10-Pack

4-Pin 3.81mm straight connectors for Axis audio surveillance (10-pack)
- Dual input/output on single 4-pin connector reduces wiring complexity
- 3.81mm pitch spacing integrates directly with Axis network cameras
- Straight orientation supports clean cable routing in confined spaces
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01963-001

Axis Device Microphone B Omnidirectional Audio - 01963-001

Omnidirectional microphone adds audio to AXIS cameras without built-in mics
- Omnidirectional pickup captures audio from all directions simultaneously
- Terminal Block to 3.5mm connector integrates with AXIS P32 series devices
- Plug-and-play installation requires no firmware updates or reconfiguration
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5506-821

Axis F7315 RJ12 Cable 15m White 4 pcs - 5506-821

15m RJ12 cables for Axis F1004 sensor units—4-pack white
- Four 15-meter cables per package for multi-unit deployments
- RJ12 connectors for direct compatibility with F1004 sensor units
- White color maintains clean aesthetic in professional installations
Special Order · Ships in 2-3 weeks

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5506-531

Axis F8225 Pinhole Accessory Mount - 5506-531

Discreet ceiling mount for AXIS F1025 pinhole sensor with 92° view
- 92° horizontal field of view covers rooms and doorways without visible hardware
- Repaintable finish blends into ceiling for covert installation in offices and retail
- IP68-rated with PoE+ power and microphone support for integrated audio monitoring
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SLA-2M2400Q 2MP Lens Module for PNM-9000VQ

Hanwha SLA-2M2800Q 2MP Interchangeable Lens Module

Hanwha SPB-VAW12 Smoked Come Cover for Q/L Fixed Domes

Hanwha SPM-4210 Network I/O Box

Hikvision DS-1603ZJ-POLE-P Vertical Pole Mount

Hikvision RCM-DE4A In-Ceiling Mounting Bracket for DS-2DE4 PTZ

i-PRO WV-QAT502-W Gangbox Adapter White

i-PRO WV-QSR503-W 4-Screw Dome Mount Bracket White

Axis 01561-001 Digital Microphone

Axis 02861-001 Network I/O Relay Module

Axis ACI Conduit Adapter 1/2" U-Shape 20mm 5 pcs - 5505-521

Axis Connector A 2-Pin 3.81mm Straight 10-Pack

Axis Connector A 4-Pin 3.81 Straight In/Out 10-Pack

Axis Device Microphone B Omnidirectional Audio - 01963-001

Axis F7315 RJ12 Cable 15m White 4 pcs - 5506-821

Axis F8225 Pinhole Accessory Mount - 5506-531

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading