IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Hanwha

SKU: SLA-T2480

Hanwha SLA-T2480 2MP Fixed Lens Module

Wide-angle 2MP module with 138° FOV and 0.45 Lux low-light
- 2MP @ 60fps (1920×1200) captures smooth motion without blur
- 138° horizontal field of view reduces module count per area
- 0.45 Lux sensitivity handles dim environments; 120dB WDR for contrast
In stock · Ships same business day

$215.00 $161.99 Save $53.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SLA-T4680V

Hanwha SLA-T4680V 2MP Pinhole Lens Module

2MP pinhole lens module for covert surveillance at 60fps
- 2MP resolution at 60fps with 120dB WDR for sharp detail in high-contrast retail or indoor spaces
- 4.6mm pinhole form factor enables discreet ceiling or wall mounting without visible camera footprint
- 73° horizontal field of view covers multiple zones from single concealed point; 0.06 lux low-light sensitivity
In stock · Ships same business day

$215.00 $144.99 Save $70.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CM

Hikvision CM Corner Mount Adapter, White

Corner mount adapter in white aluminum for surveillance cameras up to 22 lbs
- Die-cast aluminum construction resists corrosion and UV degradation outdoors
- 22 lbs (10 kg) load capacity fits most compact bullets, turrets, and PTZ models
- White finish blends into light building surfaces without aesthetic compromise
In stock · Ships same business day

$61.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: PWM850

i-PRO PWM850 Pantone Gray Pendant Shroud & Wall Bracket

Dual-mount pendant shroud and wall bracket for i-PRO cameras
- Pendant shroud and wall bracket in one assembly—switch mounting without extra hardware
- Pantone Gray finish for discrete, professional appearance in any facility
- Compatible with i-PRO camera systems for streamlined surveillance deployment
Special Order · Ships in 2-3 weeks

$175.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Vivotek

SKU: AM-21C

Vivotek AM-21C PTZ Camera Wall Mount Bracket

Aluminum PTZ wall mount with vibration isolation for smooth pan-tilt
- Aluminum alloy construction resists corrosion in outdoor/coastal environments
- Vibration-isolated design eliminates jerky motion during PTZ tracking sequences
- Compact 276 × 140 × 202 mm footprint fits tight wall spaces
In stock · Ships same business day

$146.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01589-001

Axis 01589-001 Audio Extension Cable B 5m 3.5mm Mono

5m 3.5mm mono extension cable for Axis IP cameras and microphones
- 5-meter reach eliminates multiple splices in retail, parking, and perimeter monitoring setups
- 3.5mm mono connector works with Axis cameras and third-party microphones—plug-and-play
- Weather-resistant construction handles indoor humidity and light outdoor exposure (IP65 rated)
In stock · Ships same business day

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-951

Axis 5503-951 Cable Gland M20x1.5 RJ45 5-Pack

M20x1.5 RJ45 cable glands for outdoor surveillance, 5-pack
- Weatherproof elastomer gasket seals Cat5e/Cat6/Cat6A cables against moisture and dust
- Durable plastic construction resists UV, corrosion, and chemical degradation outdoors
- M20x1.5 metric thread fits standard camera enclosures and network equipment directly
In stock · Ships same business day

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5504-711

Axis 5504-711 Corner Bracket Mount

Corner bracket mount for dual-angle coverage at building intersections
- Positions single camera at corner junction to cover two adjacent walls
- Weather-resistant construction in RAL 9003 white, weighs only 1.8 kg
- Compatible with Axis P5414-E/15-E, Q1765-LE, Q1931-E, P33-VE cameras
In stock · Ships same business day

$103.08 $99.99 Save $3.09

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01552-001

Axis F7301 1m Cable 4-Pack - 01552-001

Four 1m cables with RJ12 & Micro USB for Axis indoor sensors
- Dual RJ12 and Micro USB connectors fit full range of Axis sensor units
- 1-meter length bridges typical ceiling-to-unit distances without excess slack
- Four-pack reduces per-unit cost and maintains spare inventory on hand
In stock · Ships same business day

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01549-001

Axis P337X Clear Dome A 4-Pack - 01549-001

Clear dome 4-pack with anti-scratch coating for P337X cameras
- Hard coating resists scratches while maintaining optical clarity indoors/outdoors
- Fits AXIS P337X-V and P337X-VE models with precision engineering for lens protection
- Four-unit pack reduces per-unit cost for multi-camera surveillance deployments
Special Order · Ships in 2-3 weeks

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-104

Axis T8007 24V DC Power Supply - 5503-104

24V DC power supply for Axis IP cameras and indoor surveillance gear
- 36W output at 1.5A — powers multiple fixed cameras or single high-draw device
- Desktop or wall-mount form factor fits cabinets and behind-camera enclosures
- Built for Axis network cameras, switches, and compatible surveillance equipment
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5506-621

Axis T91B21 Professional Camera Stand - 5506-621

Aluminum stand for Axis M11/P13/Q16 cameras, wall and ceiling mount
- Tool-free assembly with 1/4-inch tripod thread compatibility across Axis series
- Matte black anodized aluminum resists corrosion and vibration in variable environments
- Integrated cable routing hole with snap-on cover hides wiring and reduces installation time
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01461-001

Axis T94T02D Pendant Kit M30-PLVE - 01461-001

Pendant mount for M30-PLVE cameras in outdoor, high-impact environments
- Impact/UV/heat-resistant polymer withstands sun, temperature swings, physical contact
- 1.5" NPS threaded mount integrates directly with M30-PLVE series cameras
- Outdoor-rated weathershield design for parking lots, perimeters, traffic corridors
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02302-001

Axis TD3902 Spare Connector Kit for D3110 - 02302-001

Replacement connectors for Axis D3110 door station
- Plug-and-play design for quick connector replacement without tools
- Includes all connector components and installation instructions
- Compatible exclusively with Axis D3110 door station models
Special Order · Ships in 2-3 weeks

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01748-001

Axis TM3001 Tilted Wall Mount for Panoramic Cameras - 01748-001

25° tilted wall mount for Axis panoramic cameras, eliminates floor blindspots
- Fixed 25° downward tilt captures floor-level activity missed by horizontal mounts
- Lightweight 1 lb design simplifies single-technician installation on drywall or masonry
- Works with Axis M3067-P and M3068-P panoramic models; white finish blends interiors
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02913-001

Axis TQ3601-E Conduit Back Box 3/4" - 02913-001

IP66/IP67 conduit back box with IK10 impact resistance for outdoor camera installs
- IP66/IP67 weatherproof sealing keeps moisture and dust away from RJ45 connections
- IK10 rated (20 joule impact) resists vandalism and accidental strikes during installation
- Powder-coated aluminum with stainless steel hardware weighs 1.3 kg, supports up to 5 kg load
In stock · Ships same business day

$206.18 $199.99 Save $6.19

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SLA-T2480 2MP Fixed Lens Module

Hanwha SLA-T4680V 2MP Pinhole Lens Module

Hikvision CM Corner Mount Adapter, White

i-PRO PWM850 Pantone Gray Pendant Shroud & Wall Bracket

Vivotek AM-21C PTZ Camera Wall Mount Bracket

Axis 01589-001 Audio Extension Cable B 5m 3.5mm Mono

Axis 5503-951 Cable Gland M20x1.5 RJ45 5-Pack

Axis 5504-711 Corner Bracket Mount

Axis F7301 1m Cable 4-Pack - 01552-001

Axis P337X Clear Dome A 4-Pack - 01549-001

Axis T8007 24V DC Power Supply - 5503-104

Axis T91B21 Professional Camera Stand - 5506-621

Axis T94T02D Pendant Kit M30-PLVE - 01461-001

Axis TD3902 Spare Connector Kit for D3110 - 02302-001

Axis TM3001 Tilted Wall Mount for Panoramic Cameras - 01748-001

Axis TQ3601-E Conduit Back Box 3/4" - 02913-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading