Axis 01552-001 F7301 Cable 1m Black 4-Pack
Overview
The Axis 01552-001 is a four-cable bundle designed as a direct replacement and expansion accessory for Axis sensor unit installations. Each cable measures 1 meter in length—short enough to minimize slack and routing complexity in sensor deployments, yet long enough to bridge typical ceiling-to-unit or wall-to-unit distances in office and retail environments. The dual RJ12 and Micro USB connectors provide the electrical and data interface required by Axis indoor sensor units; the black jacket blends into cable trays and conduit without calling attention to itself.
Key Features
- 1-Meter Length: Balances reach against cable clutter—avoids excess coiling in compact installations while clearing the 0.5m minimum for typical sensor placement flexibility.
- RJ12 & Micro USB Connectors: Dual-connector design ensures compatibility with the full range of Axis indoor sensor unit interfaces; one cable can support both power and data signaling without adapter chains.
- Four Cables per Pack: Reduces per-unit cost compared to buying singles, and ensures spare inventory for future replacements or expansion without requiring a new purchase order.
- Black Finish: Low-visibility appearance in professional interiors—particularly important in customer-facing spaces where visible cabling can undermine perceived quality.
- Indoor-Rated Construction: Suitable for standard office, retail, and facility environments; not rated for outdoor or industrial moisture exposure.
Integration & Compatibility
This cable is purpose-built for Axis indoor sensor units and operates within standard Ethernet and low-voltage power standards. Verify your specific sensor unit model's connector pinout before installation; Axis documentation will clarify which connector type (RJ12 or Micro USB) your unit requires. The 4-pack format is ideal for multi-unit NVR and camera deployments where standardized cabling reduces provisioning time and simplifies troubleshooting during commissioning.
What's in the Box
- 4 × Axis F7301 Cables, 1 meter length, black, with RJ12 and Micro USB connectors
Frequently Asked Questions
Q: Will the Axis 01552-001 cable work with non-Axis sensor units?
A: No. The cable is designed specifically for Axis indoor sensor units with compatible RJ12 or Micro USB connectors. Verify your sensor unit's connector type in its product documentation before purchasing.
Q: Can I use this cable outdoors or in a wet environment?
A: Not recommended. The Axis 01552-001 is rated for indoor use only. Outdoor or high-moisture installations require outdoor-rated cabling with appropriate IP rating.
Q: Is 1 meter long enough for my ceiling-mounted sensor?
A: Typically yes for standard office and retail ceiling heights (8–10 feet), but measure the run from your sensor unit to the nearest power and network termination point. If your distance exceeds 1 meter, consider routing the cable along existing conduit or mounting structure.
Q: Do I need to buy the 4-pack, or can I purchase fewer cables?
A: The Axis 01552-001 is sold as a 4-pack only. Contact your supplier for single-cable or alternative bundle options if you require only one or two replacements.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Axis 01552-001 is a straightforward accessory: four 1-meter cables with dual RJ12 and Micro USB connectors, packaged for multi-unit sensor deployments. It's the kind of consumable you'll reach for when rolling out an indoor monitoring refresh or replacing damaged leads in existing sensor arrays. The 1-meter length is realistic for office and retail ceilings without excess slack, and the four-pack pricing makes sense if you're commissioning more than one sensor unit.
Deployment Considerations:
- Connector Verification: Confirm your Axis sensor unit's pinout before ordering—while the dual connector design covers most indoor units, a mismatch still means the cable won't function. Axis documentation is clear on this, but field mistakes happen.
- Cable Length Trade-off: 1 meter works for typical 8–10 foot drop distances, but will require routing discipline if your sensor-to-termination distance approaches or exceeds that length. Plan your runs before pulling cables.
- Indoor-Only Rating: If any part of your run transitions to a vestibule, mechanical space, or exterior wall cavity with moisture exposure, this cable will fail faster than expected. Use outdoor-rated alternatives for those segments.
Stock the Axis 01552-001 as a standard spare in deployments of three or more sensor units—the 4-pack bulk pricing offsets the cost of keeping one or two on the shelf for emergency replacement, and it eliminates the procurement friction when a cable fails on-site.
