GRI · 5065

GRI 5065 Series 3/8" Recessed Magnetic Reed Contact

3/8" recessed magnetic reed contact for concealed door detection

• 3/8-inch recessed magnetic reed contact for standard door frames
• Matches 95% of commercial door-to-frame clearance configurations
• Lifetime US-made warranty - 1 lb sealed reed switch assembly

GRI · 5088-W

GRI 5088 Series 3/8" Flat Magnet Recessed Contact

3/8" recessed flat magnet contact for door position feedback

• 3/8-inch flat magnet recessed contact for standard frame depths
• Reduced protrusion lowers tampering and snag-hazard exposure
• Lifetime US-made warranty for commercial door monitoring

GRI · GI-29AW

GRI GI-29AW Magnetic Door Contact

When you're spec'ing entry points for intrusion systems where exposed wiring isn't an option and surface-mount aesthetics matter, you need a reliable

• Wide-gap surface-mount magnetic door and window contact
• Normally-closed (NC) hardwired output for fail-safe loop monitoring
• Compact white housing matches residential and office trim

GRI · GR1840

GRI GR1840 Oval Channel Magnet with Recessed Switch

Oval channel magnet with integrated recessed switch for door status feedback

• Oval channel magnet with built-in recessed reed switch in one unit
• Single-component install - no separate magnetic contact wiring
• Lifetime US-made warranty - recessed mount for clean appearance

GRI · GR2721

GRI GR2721 High Security Biased Contact

UL634 Level 2 recessed contact for high-security entry monitoring

• UL634 Level 2 high-security biased contact resists tamper and defeat
• 0 to 3/16 inch (4.76 mm) sensing gap for tight surface mount fit
• 10 uA standby current for very low alarm power budget impact

GRI · GR2723

GRI GR2723 High Security Biased Contact

High-security biased contact for access control door strikes

• Biased magnetic contact for high-security door position monitoring
• Lifetime US-made warranty - tamper and defeat resistant
• Drops into standard alarm zone wiring with EOL resistor compatibility

GRI · MS4702

GRI MS4702 Magnasphere High Security Contact

Magnasphere magnetic reed switch for high-security door monitoring

• Magnasphere magnetic reed contact for high-security door monitoring
• Lifetime US-made warranty - drop-in for critical access points
• Compatible with standard alarm panel zone input wiring

GRI · PTDC

GRI PTDC Power Transfer Device with Connector

Power distribution for multi-reader access control with signal isolation

• Power transfer device with connector for multi-door access systems
• Twist-lock cable interface for rapid deployment and replacement
• Lifetime US-made warranty - includes mounting screws and hardware

HES · 10-262

HES 10-262 Surface 4 Ball Contact Device

Surface-mount 4-ball contact device for HES electric strike systems

• 4-ball contact closure integrates directly with HES strike systems for door status monitoring
• Surface-mounted design eliminates recessed installation, ideal for retrofit applications
• 24VDC operation supports standard access control platforms and event logging

HES · 1000-110

HES 1000-110 Replacement Strike Plate

Genuine HES replacement strike plate for 24VDC electric strike systems

• Steel construction compatible with HES electric strike product lines
• Fits standard commercial door frame configurations for access control
• Replacement component for wear, damage, or system reconfiguration needs

HES · 1006-BLK

HES 1006 electric strike body black finish - 1006-BLK

When you need a field-proven electric strike that installs cleanly in standard door prep and delivers consistent performance across thousands of

• Field-selectable fail-safe or fail-secure operation matches lockdown and life safety codes.
• Fits standard ANSI door prep on hollow metal, aluminum, and wood frames without modification.
• Accepts 12/24 VDC or AC input, simplifying power supply design in multi-door ACS deployments.

HES · 1006-630-LBSM

HES 1006 Electric Strike Body LBSM 630 finsh - 1006-630-LBSM

When you're retrofitting access control into existing hollow metal or wood frames with mortise or cylindrical locksets, you need an electric strike

• Fail-secure, UL 1034/UL 10C-listed strike holds 1,500 lbs static with no power.
• LBSM dual monitors enable forced-door, door-ajar, and REX logic in one unit.
• Fits standard ANSI A115.1 cylindrical cutout; no frame modification required.

HES · 1006-F-630

Hes 1006 Electric Strike Body Stainlss Steel - 1006-F-630

When you need a retrofit electric strike that handles high-traffic openings without tearing out the frame, the HES 1006 delivers a field-proven

• Fits ANSI A115.1 cylindrical cutout, minimizing frame modification on retrofit installs.
• 1,500 lb static / 70 ft-lb dynamic strength with 1,000,000-cycle endurance rating.
• UL 1034 and UL 10C (3-hour fire) listed; 12/24V DC field-selectable for flexible wiring.

HES · 1006CDB-F-630

HES 1006 Series Complete Electric Strike for - 1006CDB-F-630

When you need reliable access control integration for commercial openings with cylindrical locksets, the HES 1006 series delivers field-proven

• Field-selectable 12/24V DC operation integrates with existing access control power supplies.
• UL 1034 and UL 10C (3-hr fire) listings satisfy code requirements across commercial openings.
• 1,000,000-cycle endurance rating supports long-term deployment in high-traffic institutional doors.

HES · 1006-F-BLK-LBSM

HES 1006 universal electric strike fail - 1006-F-BLK-LBSM

When you need a reliable electric strike that adapts to varied frame conditions without callbacks, the HES 1006 delivers field-proven performance

• Fail-secure operation keeps doors locked on power loss, protecting the security perimeter.
• Handles cylindrical and mortise locksets in wood and hollow metal frames from one SKU.
• Field-reversible left/right-hand swing and 12/24 VDC/VAC input suits most AC panel wiring.

HES · 1006CAS-2

HES 1006CAS-2-630 Electric Strike

• Fail-secure mode keeps door locked on power loss; rated 1,500 lbs static strength.
• 12/24V AC/DC field-selectable voltage reduces SKU count across mixed-voltage systems.
• UL 1034 and UL 10C (3-hr fire) listed; 1,000,000-cycle endurance for high-traffic doors.

HES · 10305LA

HES 10305LA 2-Pin Transfer Part

2-pin transfer part for HES electric strike systems and retrofits

• 2-pin configuration integrates with HES electric strike platforms
• Operates at 6VDC for access control system installations
• Professional-grade construction for new builds, maintenance, and retrofits

HES · 10306LA

HES 10306LA Current Transmitter Two-Leaf Door/Window

Current transmitter for dual-leaf doors/windows in HES systems

• Monitor two paired entry points simultaneously with real-time status
• Integrates directly into HES access control infrastructure
• Built for institutional, commercial, and industrial security facilities

HES · 10760051

HES 10760051 Electric Strike Faceplate Radius Corner Flat 9"

When replacing or retrofitting electric strikes in commercial door frames, achieving a professional finished appearance often requires custom

• 9-inch satin stainless faceplate covers oversized cutouts without frame modification.
• Radius corner geometry ensures flush fit on corner-mounted HES electric strike bodies.
• Field-installable direct replacement simplifies retrofit installs in high-traffic commercial doors.

HES · 10C

HES 10C Guard Rings Accessory Ring

Vandal-resistant protective ring for HES 10C camera stability

• Vandal-resistant guard ring for HES 10C electric strikes
• Structural reinforcement hardens lock mounting points
• 24VDC strike accessory for outdoor and high-traffic doors

HES · 10C(25)

HES 10C25 Guard Ring for K-5 and K-13

Guard ring for K-5 and K-13 series indoor security mounting

• Compatible with K-5 and K-13 series devices for direct installation
• Guard ring form factor protects equipment and maintains alignment
• Designed for indoor security applications with professional mounting support

HES · 1200L

HES 1200L Electromagnetic Lock

Fail-safe electromagnetic lock for single and double doors, stays locked during power loss

• Relay-activated operation integrates with standard access control systems without custom wiring
• Remains locked during power interruptions, protecting secured areas when grid or system fails
• Minimal maintenance design reduces long-term upkeep costs across multi-door commercial deployments

HES · 1200LB

HES 1200LB Single Magnetic Lock – 1200 lb Holding Force

1200 lb magnetic lock with dual voltage and built-in sensors

• 1200 lb holding force for standard single-leaf institutional doors
• Jumper-selectable 12 or 24 VDC operation—no power conversion needed
• Integrated bond and door status sensors with LED indicator feedback

HES · 1200LBDURO

HES 1200LBDURO Alarm Controls 1200LB Single Magnetic Lock

• 1,200 lb holding force on a UL-listed fail-safe lock rated for commercial doors.
• 12/24V DC field-selectable with built-in door position sensor and bi-color LED.
• DURO reinforced aluminum body with a lifetime warranty reduces service callbacks.

HES · 1200LBPCB

HES 1200LBPCB PC Board for 1200LB Strike Lock

Replacement PC board for HES 1200LB electric strike locks

• PC board for the HES 1200LB magnetic lock strike
• Converts access control inputs to precise activation pulses
• 24VDC drop-in board for fault-clearing lock systems

HES · 1200LDURO

HES 1200LDURO 1200 Pound Electric Lock with LED

1200-pound electric strike with LED status for 12V DC access control

• 1200-pound holding force for commercial door strike applications
• LED indicator shows real-time lock engagement without extra diagnostics
• Duro corrosion-resistant finish rated for high-traffic indoor environments

HES · 1200PCB

HES 1200PCB PC Board Control Module

Control module for HES 1200 Series electronic strikes, 12VDC operation

• Operates at 24VDC, compatible with standard access control power supplies.
• Rack-mountable PC board fits 19-inch relay racks and standard electrical enclosures.
• Direct drop-in for HES 1200 Series strikes; no adapter boards or interface modules required.

HES · 1200S

HES 1200S Fail-Safe Electromagnetic Lock

Fail-safe electromagnetic lock for standard door frames, 12/24VDC

• Defaults to locked during power loss or system failure for perimeter security
• Compact design fits standard commercial door frames without modifications
• Integrates with common access control systems and badge readers

HES · 1200SDURO

HES 1200SDURO Heavy-Duty Electromagnetic Lock

24/7 electromagnetic lock for institutional access control

• Continuous duty operation maintains holding force round-the-clock
• 24VDC standard integration with ANSI/BHMA access control systems
• Fail-safe compatible design for institutional and industrial facilities

HES · 1200WP

HES 1200WP Electromagnetic Lock Weatherproof

Fail-secure electromagnetic lock rated for outdoor rain, salt spray, and freeze-thaw cycles

• Sealed IP-rated housing withstands rain, salt spray, dust on exterior doors and loading docks
• Fail-secure solenoid keeps door locked during power loss or access control system outage
• Fits single and double glass doors; operates -40°C to 60°C on 12VDC or 24VDC

HES · 15.23--08940R11

HES 15.23--08940R11 Electric Strike

24VDC electric strike for access control integration on standard doors

• Compatible with access control systems for electronically triggered door release
• Indoor-rated strike designed for standard door frame mounting
• Operates on 24VDC input for integration into facility security infrastructure

HES · 15.23--08990R11

HES 15.23--08990R11 Electric Strike

12V DC electric strike with fail-secure/fail-safe modes for access control

• Configurable fail-secure or fail-safe operation for flexible security requirements
• 12V DC powered, compatible with standard access control panels and systems
• Mounts directly into standard door frames without structural modifications

HES · 1500C-BSP

HES 1500 Series Electric Strike Latchbolt Lock - 1500C-BSP

When you need reliable fail-secure latchbolt control in hollow metal or wood frames, the HES 1500 Series delivers field-proven performance without

• Fail-secure mode keeps the door locked on power loss — critical for IT closets and perimeter doors.
• 12/24V DC field-selectable operation integrates directly with most access control panels.
• UL 1034 and UL 10C 3-hour fire-rated; 1,500 lb static strength for high-security frames.

HES · 1500C-612

HES 1500C Electric Strike Satin Bronze Clear Coated - 1500C-612

• Accepts 12VDC or 24VDC input, fitting existing access control panel wiring.
• Field-selectable fail-secure/fail-safe mode supports code-compliant egress design.
• Latchbolt monitoring delivers real-time door position feedback to control panels.

HES · 1500C-630

HES 1500C-630 -Complete Electric Strike Kit

When you're specifying electric strikes for commercial access control installations, you need a solution that handles the full scope of door hardware

• Complete kit ships with strike body, faceplates, and all mounting hardware in one order.
• 630 satin stainless finish resists corrosion and matches standard architectural hardware.
• Supports both failsafe and failsecure wiring configs for flexible security policy deployment.

HES · 1500C-630-DLMS

HES 1500C-630-DLMS Heavy Duty Electric Strike with Dual Lock

• Field-selectable 12/24V DC operation eliminates duplicate SKUs across mixed-voltage projects.
• DLMS provides independent fail-secure and fail-safe status feedback for supervised access panels.
• UL 1034 and UL 10C 3-hour fire-rated; 1,500 lb static strength meets Grade 1 requirements.