Refine by

No filters applied

Sub categories

Cellular Communicators

12 items

Intrusion Panels

33 items

Keypads & Touchscreens

34 items

Motion & Glass Break Detectors

67 items

Sirens & Sounders

12 items

Wireless Sensors

52 items

Access Cards & Credentials

22 items

Access Hubs & Controllers

21 items

Card Readers

54 items

Control Systems

258 items

Credentials

656 items

Door Controllers

139 items

Door Hardware & I/O

1530 items

Door Locks & Strikes

325 items

Showing Results for Access Control

Compare

Out of stock
HES

SKU: 791-630

HES 791-630 7000 Series Faceplate Satin Stainless Steel

Satin stainless steel faceplate for HES 7000 Series locks
- Direct replacement for 7000 Series—no adapters or modifications needed
- Corrosion-resistant satin finish rated for indoor and outdoor use
- Durable stainless steel construction maintains professional appearance
$81.00 $80.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$81.00 $80.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 792-630

HES 792-630 7000 Series Satin Stainless Steel Faceplate

Satin stainless steel faceplate for HES 7000 Series electric strikes
- Corrosion-resistant satin finish for indoor and outdoor installations
- Direct fit with HES 7000 Series electric strike and locking mechanisms
- Satin stainless steel construction resists fingerprints in high-traffic areas
$81.00 $80.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$81.00 $80.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8000

HES 8000 Electric Strike PoE Access Control

PoE electric strike controller—single Ethernet cable replaces power runs
- IEEE 802.3af PoE eliminates separate electrical infrastructure on retrofit projects
- Single-cable installation reduces door-frame clutter and commissioning complexity
- Integrates with standard networked access control systems—no vendor lock-in
$273.00 $137.99 Save $135.01

Add to Cart
The item has been added
Free shipping over $499

$273.00 $137.99 Save $135.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8000-LBM

HES 8000-LBM Electric Strike with Latch Bolt Monitor

Electric strike with integrated latch bolt monitoring for access control
- Real-time latch position feedback built into strike body eliminates separate sensor
- 24VDC operation compatible with standard commercial access control systems
- Single-unit design reduces installation labor and component count across deployments
$399.00 $201.99 Save $197.01

Add to Cart
The item has been added
Free shipping over $499

$399.00 $201.99 Save $197.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8000C-12/24D-630

HES 8000C-12/24D-630 Concealed Door Electric Strike

Concealed electric strike, 12/24VDC dual voltage for access control
- Dual 12/24VDC input eliminates SKU proliferation across mixed-power AC panel deployments.
- Concealed strike profile preserves frame aesthetics with no surface hardware or visible solenoids.
- Fail-secure electromagnetic hold releases only on access control relay command, no moving parts exposed.
$313.00 $182.99 Save $130.01

Add to Cart
The item has been added
Free shipping over $499

$313.00 $182.99 Save $130.01

Add to quote Compare
Compare

Add to Cart The item has been added
HES

SKU: 8000C-630

HES 8000C-630 Universal Electric Strike

Universal electric strike for standard frames, retrofit and new construction
- Works with standard commercial door frame cutouts—no custom machining needed
- 24VDC electromagnetic actuation integrates with card readers and access control panels
- Fail-locked on power loss; handles thousands of cycles without mechanical wear
$313.00 $158.99 Save $154.01

Add to Cart
The item has been added
Free shipping over $499

$313.00 $158.99 Save $154.01

Add to cart Add to quote Compare
Compare

Out of stock
HES

SKU: 8000C-630-LBM

HES 8000C-630-LBM Electric Strike Complete Package

Electric strike, 12/24VDC, complete package for standard frames
- All components included—strike unit, hardware, and installation parts in one box
- Operates on 12VDC or 24VDC for flexible power integration across facilities
- Fits standard commercial door frames without custom modification or cutouts
$418.00 $219.99 Save $198.01

Add to Cart
The item has been added
Free shipping over $499

$418.00 $219.99 Save $198.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8000C-LBM

HES 8000C-LBM Electric Strike with Latch Bolt Monitor

Electric strike with integrated latch monitoring for standard door frames
- Built-in latch bolt position feedback eliminates external sensors and wiring
- Fail-secure operation keeps strike locked during power loss for code compliance
- 24VDC powered, fits standard strike cutouts with no frame modification needed
$438.00 $221.99 Save $216.01

Add to Cart
The item has been added
Free shipping over $499

$438.00 $221.99 Save $216.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 801-630

HES 801-630 8000/8300 Series Faceplate

Replacement faceplate for HES 8000/8300 series electric strikes
- Direct OEM replacement ensures precise fit for HES 8000 and 8300 series strikes.
- Rated for 24VDC operation, aligning with standard access control power infrastructure.
- US-manufactured component supports accurate door frame alignment and reliable strike seating.
$40.00 $39.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$40.00 $39.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 801A-630

HES 801A-630 Satin Stainless Steel Faceplate

Satin stainless steel faceplate for HES electrified strike hardware
- Satin stainless steel construction resists corrosion in high-traffic commercial installs.
- Compatible with HES electrified locking hardware for streamlined access control integration.
- Supports 24VDC input, fitting standard electrified strike wiring configurations directly.
$49.00 $48.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$49.00 $48.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 801E-630

HES 801E-630 Electric Strike Access Control

Fail-safe electric strike for access control on standard door frames
- Fail-safe 24VDC operation releases latch on power loss, meeting NFPA 101 Life Safety Code.
- Direct low-voltage reader wiring eliminates relay logic, cutting installation labor on small-to-medium systems.
- 1.25 lb housing fits standard hollow-metal and wood frames with no specialized door prep required.
$40.00 $20.99 Save $19.01

Add to Cart
The item has been added
Free shipping over $499

$40.00 $20.99 Save $19.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 805-630

HES 805-630 Flat Faceplate Satin Stainless

Satin stainless flat faceplate for HES 8000/8300 strike systems
- Flat faceplate with radius corners fits standard door frames for clean installs.
- Satin stainless steel construction resists corrosion in high-moisture environments.
- Direct compatibility with HES 8000 and 8300 series simplifies strike replacement.
$64.00 $63.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$64.00 $63.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8055-01-628

HES 8055-01-628 Tall Door Kit

Tall door kit extends HES electric strike reach for non-standard heights
- Works with HES electric strike systems for elevated frame installations
- Accommodates non-standard door heights beyond standard strike kit specs
- Certified integrator installation required for commercial and institutional use
$172.00 $171.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$172.00 $171.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8100-MLRM-36-32DMEC

HES 8100-MLRM-36-32DMEC SVR MLR Exit Device

SVR MLR exit device for 12V/24V access control systems
- Single Voltage Relay with Multi-Logic Relay for flexible signal routing
- Controls door strikes and electromagnetic locks with low-power relay contacts
- Field-installable surface-mount and recessed compatible, UL-listed
$3,265.00 $1,627.99 Save $1,637.01

Add to Cart
The item has been added
Free shipping over $499

$3,265.00 $1,627.99 Save $1,637.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8414-37136

HES 8414-37136 Life-Safety Narrow Stile Mortise Exit Device

Mortise exit device for narrow stile aluminum/glass doors, 1-1/8" backset
- Mortise-mounted design fits tight aluminum and glass door frames without external profile
- 1-1/8" backset matches standard narrow stile door pocket geometry for direct retrofit
- Ships without monitoring switch—add your own system or use standalone mechanical operation
$950.00 $473.99 Save $476.01

Add to Cart
The item has been added
Free shipping over $499

$950.00 $473.99 Save $476.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8414-38136

HES 8414-38136 Life-Safety Narrow Stile Mortise Exit Device

Life-safety mortise exit for narrow stile aluminum and glass doors
- Mortise-mount design with 1-1/8 inch backset fits standard narrow stile preparations
- Life-safety certified for emergency egress compliance in commercial and institutional settings
- Internal cavity installation minimizes visible hardware on door surface
$950.00 $473.99 Save $476.01

Add to Cart
The item has been added
Free shipping over $499

$950.00 $473.99 Save $476.01

Add to quote Compare

Access Control

Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.

Plan Your Deployment

Door count and expansion requirements
Reader type (card, keypad, biometric) and credential format
Fail-safe vs fail-secure hardware design
Power, cabling, and network connectivity planning
Multi-site governance and consistent standards

Buying Guide Get Recommendations Deployment Support

Build a Complete System

Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.

Door intercoms

Aiphone DA-1MD Audio Handset Master Station

$82.99

Aiphone DB-1MD Hands-Free Master Station

$144.99

Aiphone DB-1SD Hands-Free Sub Master Station

$113.99

Aiphone JOS-1FW 7" Video Intercom Box Set with Mobile A

$820.99

What to Look For When Buying

The six decisions that matter most before you spec.

Fail-Safe vs Fail-Secure

Fail-safe locks (power-to-lock) unlock on power loss — required for egress routes by most fire codes. Fail-secure (power-to-unlock) stays locked on power loss — used on office and storage doors where security trumps egress. Life-safety code interpretation varies by jurisdiction; consult your AHJ before specifying. See our fail-safe vs fail-secure guide.

OSDP vs Wiegand

Wiegand is the legacy reader-to-controller protocol (unencrypted, one-way, limited to 26-bit formats). OSDP (Open Supervised Device Protocol) is the modern replacement — bidirectional, encrypted, supervised, and future-proof for Seos/mobile credentials. New deployments should be OSDP; plan a Wiegand-to-OSDP migration path in legacy systems before adding mobile credential support.

Credential Technology

125 kHz proximity (HID Prox, EM) is the legacy standard — cheap, cloneable, no security. 13.56 MHz smart cards (iCLASS SE, MIFARE DESFire EV3, Seos) use AES encryption and are the commercial standard. Mobile credentials via NFC/BLE increasingly replace physical cards — but only on OSDP-capable readers. Specify multi-technology readers for migration flexibility.

Cloud vs On-Prem Management

Traditional server-based access platforms (Lenel, Genetec, C-Cure) require IT infrastructure and maintenance contracts. Cloud-native platforms (Brivo, Openpath/Avigilon Alta, Genea) eliminate servers but add per-door monthly fees. Mid-size deployments increasingly choose cloud; enterprise + critical infrastructure still favor on-prem. Hardware choice determines which platforms you can run.

Power Supply Sizing

Every lock + reader + controller has an inrush current and a holding current — and they differ. Maglocks hold at 300-500 mA but pull 800 mA on release. UL 294 power supplies rated for total simultaneous holding + 25% headroom, with battery backup sized to code-required runtime. Undersized power supplies are the #1 cause of access-control nuisance failures.

Code Compliance (Egress)

IBC, NFPA 101, and ADA all mandate unimpeded egress. A magnetically-locked door requires a fire-alarm tie-in, a bond-sensor, and a request-to-exit device — omit any and the door is a code violation. Delayed-egress maglocks require 15-second delay + sounder per NFPA. Always confirm lock spec with the AHJ before ordering.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

OSDP v2 + Secure Channel

Open Supervised Device Protocol v2 with Secure Channel Protocol (SCP) delivers AES-128 encryption between reader and controller over RS-485. Replaces unencrypted Wiegand. Required for new federal deployments and FIPS 140-2 applications. All modern HID, ASSA ABLOY, and STid readers support OSDP + SCP.

Seos + iCLASS SE Credentials

HID Seos is the current-generation credential platform: AES-128 encrypted, multi-application, supports mobile wallets, backward-compatible with iCLASS SE. Seos credentials work on Seos readers + older iCLASS SE readers — iCLASS SE credentials do not work on legacy iCLASS (non-SE) readers. Plan migrations carefully.

FIPS 201 / PIV + PIV-I

Federal Identity Verification standard — the credential format used for federal employee and contractor badges. PIV-I (Interoperable) is the commercial variant for hospitals, utilities, and critical-infrastructure contractors. Specify PIV/PIV-I-capable readers (HID pivCLASS, multiCLASS SE) for any facility that hosts government visitors.

UL 294 Listing

Underwriters Laboratories listing for access control system units — power supplies, controllers, and locks. UL 294 6th edition covers security, durability, and overcurrent/overvoltage protection. Insurance and code requirements increasingly specify UL 294 listing. Altronix access-control power supplies are UL 294 listed across the catalog.

Wiegand Protocol

Legacy reader-to-controller protocol — one-way, unencrypted, variable bit-length format. Easily cloned with <$50 hardware. Still widespread because of low cost and universal compatibility. Acceptable for low-security interior doors; should be replaced with OSDP on any external or sensitive-area door.

Request-to-Exit (REX)

Motion- or push-button-activated device that signals the access controller to unlock the door from the secure side without generating an alarm. Required for maglock-equipped egress doors per code. PIR REX sensors must be properly aimed — nuisance alarms and held-door violations trace back to bad REX placement more than any other cause.

Typical Deployment Scenarios

Multi-Tenant Office Building

Lobby turnstiles with multi-tech readers, tenant suite doors with HID Signo + Seos, parking garage with long-range readers, elevator control for floor-by-floor access. Cloud platform (Brivo, Openpath) with mobile credentials replaces physical card issuance. Integration with SIP video intercoms for visitor management.

K-12 School Secure Vestibule

Front entry vestibule with fail-secure electric strike, interior Aiphone video intercom for visitor buzz-in, badge readers for staff, lockdown button integrated with mass notification. Back-of-house doors fail-safe per code. Full VMS integration for event overlay.

Hospital & Healthcare

Unit doors with HID multiCLASS SE + PIV-I compatibility, medication rooms with dual-authentication (card + biometric), ER ambulance bays with ruggedized readers, delayed-egress on behavioral health wards. Lenel or Genetec server-based platform with HIPAA-compliant audit logging. High-cycle-count electric strikes required.

Data Center & Critical Infrastructure

Biometric readers at server-room entries, mantrap doors with anti-tailgating sensors, cage-level access with OSDP + SCP, 7x24 audit logging. FIPS 201 / PIV-I credentials. Integration with IP cameras for tailgating review and infrastructure monitoring for physical-layer security.

Frequently Asked Questions

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks (also called "power-to-lock") unlock on power loss — required for egress routes by most fire and life-safety codes. Fail-secure locks ("power-to-unlock") stay locked on power loss — typically used on office, storage, and supply doors where security trumps egress. Always confirm lock selection with the local AHJ; see our fail-safe vs fail-secure guide.

Is OSDP required for new access control installations?

Not legally required in most jurisdictions — but strongly recommended and effectively mandatory for federal deployments. OSDP with Secure Channel provides AES-128 encryption between reader and controller, bidirectional supervision, and future-proof support for mobile credentials. Legacy Wiegand is unencrypted and easily cloned. New deployments should be OSDP-capable from day one; legacy systems should plan a migration path.

Are HID card readers NDAA compliant?

Yes. HID Global is headquartered in Austin, TX, manufactures in multiple allied countries, and is fully NDAA Section 889 compliant. HID Signo, multiCLASS SE, iCLASS SE, and pivCLASS reader families are all eligible for federal, state government, and critical-infrastructure procurement. Credential cards are manufactured to the same compliance standard.

How do I size an access control power supply?

Add up holding current for all locks + reader standby current + controller standby current, then add 25% headroom for inrush and aging. Battery backup should provide code-required standby runtime (typically 4 hours for fire-alarm tie-ins; 15 min for access-only). Altronix UL 294 power supplies post clear spec sheets for total and per-output current — match to your actual load, don't guess.

Can mobile credentials replace physical access cards?

In most modern deployments, yes — but the reader has to support it. Readers need NFC and/or BLE (Bluetooth Low Energy) plus a partnership with the mobile credential platform (HID Mobile Access, Openpath, Kastle, etc.). Older proximity-only readers cannot read mobile credentials. Mobile adoption is usually mixed with physical cards during a multi-year transition — plan for both.

What's the difference between iCLASS SE and Seos credentials?

iCLASS SE was HID's previous-generation secure credential (AES-128, 2013-era). Seos is the current generation (2016+) — same AES-128 security, but multi-application, mobile-wallet capable, and future-proof. Seos credentials work on Seos-capable readers and on older iCLASS SE readers. iCLASS SE credentials do not work on legacy (pre-SE) iCLASS readers. See our HID Global catalog for current Seos SKUs.