Camden

SKU: CM-331

Camden Wired Touchless switch w/ built-in door control - CM-331

• Built-in Form C relay (3A @ 30VDC) controls up to 3 doors without external modules.
• Line-powered 12–24 VAC/DC operation eliminates battery replacement and legacy 30VDC issues.
• IR sensing detects motion from 1–28 in. standard, up to 72 in. in auto-range mode.

Camden

SKU: CM-332

Camden Wired Touchless Switch, w/ built-in door control, 2 Relays, ...

Wired touchless switch with built-in logic for up to 3 doors

• Two relay outputs control strikes and latches across multiple entry points
• 30VDC operation with touchless activation—no contact required
• Wall, pendant, or recessed mount options for flexible installation

Camden

SKU: CX-ESF-4

Camden Wood Frame Face Plate for CX-ED1309 brushed - CX-ESF-4

• Brushed aluminum trim conceals mounting gaps on wood frame CX-ED1309 installations.
• Direct compatibility with CX-ED1309 strike requires no wiring or power supply changes.
• Flat-mount design aligns to existing strike holes, minimizing rework during finishing.

Camden

SKU: CX-ESF-4BZ

Camden Wood Frame Face Plate for CX-ED1309 dark - CX-ESF-4BZ

• Dark bronze factory finish matches CX-ED1309 hardware for a consistent door trim spec.
• Designed exclusively for CX-ED1309 magnetic lock; not compatible with CX-91S or CX-92S.
• Covers strike mounting edges on wood frames, reducing moisture ingress risk at the frame.

Camden

SKU: CM-PT250-12

Camden Zamac endcaps, 12” length (Formerly CM-PTS14)

12" zamac endcaps for access control door hardware installations

• Zamac construction resists corrosion in standard indoor environments
• 12-inch length fits standard door opening frame assemblies
• Includes mounting screws, anchor plugs, and cable connectors

Code Blue

SKU: 40087

Code Blue 40087 LED Beacon Strobe Light Blocker

• Up to 375 flashes/min cuts through high-noise environments for instant breach recognition.
• IP56 + -40°F to +158°F range enables outdoor pole or unheated warehouse mounting without weatherproofing.
• Cabinet, pole, and wall mount compatibility at 2.2 lbs requires no structural reinforcement.

Code Blue

SKU: 40117

Code Blue 40117 S-1000 LED Combo Strobe Light Retro

PoE-powered LED strobe light with IP56 weather protection for outdoor alerts

• IP56-rated design withstands dust and water in continuous outdoor deployments
• PoE (802.3af) power eliminates dedicated electrical runs for simpler installation
• Integrates directly with PoE switches and IP-based security system infrastructure

Code Blue

SKU: 40197

Code Blue 40197 S-50 Strobe Light Assembly

PoE strobe light assembly for outdoor security and emergency signaling

• IP56-rated weatherproofing handles dust and water exposure in outdoor installations
• 802.3af PoE power eliminates separate power runs for simplified deployment
• 20MP+ sensor resolution captures high-detail documentation for security events

Code Blue

SKU: CB5P00022

Code Blue CB5P00022 Sylence Backlit Keypad

• Operates at 24V DC, compatible with dual-voltage paging amplifier installations.
• Backlit keys ensure reliable use in low-light or low-visibility deployment areas.
• Direct replacement part for Code Blue paging amplifiers, minimizing swap-out time.

Code Blue

SKU: CB5P00039

Code Blue CB5P00039 Emergency Two-Sided Strobe Light

Two-sided strobe light, IP68-rated, PoE-powered for outdoor emergency alerting

• IP68 fully sealed design operates in wet locations and harsh outdoor weather
• PoE (802.3af) power eliminates separate infrastructure at installation point
• Two-sided coverage for 360° emergency notification across perimeter security zones

Code Blue

SKU: CB9S00061

Code Blue CB9S00061 Power Line Strobe Light

PoE-powered IP68 strobe light for industrial security signaling

• PoE 802.3af power eliminates separate AC/DC runs, simplifying remote deployments.
• IP68 and NEMA 4 ratings handle full dust ingress, washdown, and direct weather exposure.
• UL 62368-1, NEMA 4, and ADA certifications satisfy compliance requirements across site types.

Comelit

SKU: 7257710

Comelit 7257710 Architect One RFID Mullion Reader

RFID mullion reader for Comelit Architect One door access systems

• Fits door frames and glass mullions at 42×112×22mm with no surface projection.
• Reads PAC HF cards up to 60mm and accepts NFC mobile credentials natively.
• Built-in accelerometer reports tamper events to the Architect One controller in real time.

Comelit

SKU: 909020110

Comelit 909020110 GS3-LF Mullion Proximity Reader

Mullion proximity reader with 4MP and PoE+ for access control

• 2560×1440 (4MP) capture supports forensic review and cardholder verification at the door.
• PoE+ (802.3at) delivers power and data over one cable, eliminating dedicated electrical runs.
• Mullion mount form factor fits tight door-frame geometry where face-mount readers won't clear hardware.

Comelit

SKU: 909020111

Comelit 909020111 GS3-LF Proximity Reader

Proximity reader with 4MP video capture and PoE+ power

• 4MP (2560×1440) onboard capture ties visual identity to each RFID access event.
• PoE+ (802.3at) delivers power and data over one cable, eliminating 24V DC runs.
• IP65-rated polycarbonate housing supports sheltered outdoor and wash-down installs.

Comelit

SKU: 909020112

Comelit 909020112 GS3-MT Mullion Proximity Reader

Mullion proximity reader with 4MP imaging and PoE+ power

• 4MP (2560×1440) sensor captures cardholder identity at credential presentation for audit trails.
• PoE+ (802.3at) powers the reader over a single Ethernet run—no dedicated 12V door wiring needed.
• Reads PAC RFID, PAC OPS™, KeyPAC, and 125 kHz LF/HF cards via one Wiegand interface.

Comelit

SKU: 909020113

Comelit 909020113 GS3-MT Standard Proximity Reader

PoE+ proximity reader with 4MP for IP-based access control

• Handles PAC OPS™, KeyPAC, and third-party Wiegand credentials on a single reader.
• PoE (802.3af) consolidates power and data on one cable run; verify 13W minimum per port.
• IP65-rated polycarbonate housing supports indoor and outdoor deployments without covers.