HES

SKU: RP-31FLASHING

HES RP-31FLASHING Red Flashing Strobe Light 12-24V

Red flashing strobe light for access control and emergency egress

• 12-24V DC operation integrates with HES RP-31 power supply modules
• Red flashing strobe pattern signals rapid visual alerts at entry points
• Stainless steel construction resists corrosion in indoor installations

HES

SKU: RP-33

HES RP-33 Radius Faceplate

Radius faceplate for HES electric strike installations

HES

SKU: RP-34

HES RP-34 Remote Plate with RGB LEDs

RGB status plate for HES strikes with stainless steel housing

• RGB LEDs (red, yellow, green) deliver real-time door status at a glance.
• Stainless steel housing resists corrosion for interior and exterior deployments.
• Medeco-compatible mounting hole integrates with standard access control frames.

HES

SKU: RP-35

HES RP-35 Remote Status Indicator Plate SGSS

Tri-color remote status plate in stainless steel for HES access control

• Tri-color LEDs (green/red/yellow) deliver instant door-strike status without line-of-sight.
• Stainless steel (SGSS) housing handles outdoor exposure at loading docks and perimeter doors.
• Runs on 12VDC low-voltage wiring, integrating directly with HES strike and control systems.

HES

SKU: RP-36

HES RP-36 LED Faceplate

LED faceplate for HES electric strikes with visual lock status

• Powered directly from the 24VDC strike supply — no separate wiring required.
• LED provides instant locked/unlocked status, reducing door troubleshooting time.
• Compatible with HES electric strikes; verify model before ordering.

HES

SKU: RP-44

HES RP-44 Radius Faceplate

Strike faceplate engineered for radius-edge door frames

• Designed for radius-edge frames, eliminating alignment gaps in HES strike installs.
• Lightweight at 0.1 lb, reducing hardware load on door frame assemblies.
• US-manufactured construction suits high-traffic commercial and institutional deployments.

HES

SKU: RP-44MOMENTARY

HES RP-44MOMENTARY Access Control Switch

Momentary push-to-exit switch for card readers and electromagnetic locks

• Momentary contact closure eliminates custom relay conditioning for mag locks and solenoid releases.
• Dual 12/24 VDC operation integrates into mixed-voltage facility infrastructure without added conditioning.
• Wall-mount form factor supports card readers, PIN pads, and biometric scanners with no custom interface logic.

HES

SKU: RP-44P

HES RP-44P Replacement Mounting Plate for FA-200

Replacement mounting plate for HES FA-200 access control switches

• Purpose-built for FA-200 switch installations, ensuring precise mechanical alignment.
• Wall-mount form factor supports clean, professional indoor access control deployments.
• US-manufactured replacement plate restores hardware integrity without full-assembly swap.

HES

SKU: RP-44SLIM

HES RP-44SLIM Remote Plate Electric Strike with FA-200

Remote plate electric strike with fail-secure lock, 24VDC powered

• Fail-secure operation keeps doors locked during power loss or system fault.
• Remote plate form factor allows strike placement away from the door frame.
• Included FA-200 power supply delivers regulated 24VDC for centralized management.

HES

SKU: RP-44SLIMP/O

HES RP-44SLIMP/O 1.5 Inch Stainless Steel Mounting Plate

Stainless steel mounting plate for HES FA20 electric strikes

• Stainless steel construction resists corrosion for reliable long-term performance.
• Precision 1.5-inch hole ensures correct alignment with HES FA20 strike switches.
• Hole-only form factor supports both surface-mount and recessed door frame installs.

HES

SKU: RP-44WH

HES RP-44WH Remote Plate Switch DPDT

DPDT remote plate switch for distributed access control circuits

• DPDT configuration enables independent dual-circuit control from a single remote plate.
• Wall-mount form factor supports distributed switching at any entry point or secured zone.
• US-made construction suits indoor access control and electromagnetic lock integration.

HES

SKU: RP-44WIRED

HES RP-44WIRED SPDT Wired Electric Strike Relay

Wall-mounted SPDT relay for hardwired HES electric strike control

• SPDT switching supports fail-safe and fail-secure modes without additional hardware.
• Direct hardwired copper path eliminates network latency and wireless failure points.
• Wall-mount form factor requires no rack space, fitting electrical closets or ACP rooms.

HES

SKU: RP-45

HES RP-45 Radius Faceplate for Electric Strikes

Radius faceplate for HES electric strikes in wood and metal frames

• Radius profile eliminates frame gaps, reducing debris intrusion and improving aesthetic fit.
• Engineered specifically for HES electric strikes to ensure full bolt seating and clean release.
• Includes substrate-matched fasteners for secure installation in both wood and metal frames.

HES

SKU: RP-45P

HES RP-45P Mounting Plate for FA-20 Switches

Dual FA-20 switch mounting plate for wall and door frame access control

• Mounts two FA-20 switches precisely, ensuring correct alignment for reliable EM lock operation.
• Supports both wall and door frame installation, adapting to varied facility layouts without modification.
• US-manufactured steel plate integrates directly with HES electrified hardware for consistent deployments.

HES

SKU: RP-46

HES RP-46 Radius Faceplate for Electric Strike Systems

Radius faceplate for curved door frames in HES electric strike systems

• Fits modern radius-edge frames without custom brackets or field mods
• Direct compatibility with HES strike systems and RP series hardware
• Professional finished appearance for visible commercial installations

HES

SKU: RP-46M

HES RP-46M SG Plate with 2 FA-200S Momentary Switches

Dual momentary switches on surface-mount plate for access control

• Two FA-200S momentary switches for request-to-exit and door strike
• Fail-safe contact closure design for secure pulse signaling
• Surface-mounted single-gang wall plate, 28VDC compatible with HES locks