Comnet
SKU: CNFE2004S1A
Overview
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Overview
Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.
The CNFE2004S1B is a two-channel Ethernet-to-optical media converter that accepts two 10/100 Mbps electrical ports and combines them into a single 100 Mbps optical output over single-mode fiber. This is the correct choice when you need to extend IP camera or network runs beyond standard copper PoE limits — single-mode fiber carries signal cleanly to 20 km (12 mi), eliminating the distance wall you hit with Cat5/Cat6. The unit supports optional 30W or 60W PoE+ on both electrical ports, so you can feed powered cameras or edge devices at the remote end without a separate power supply at the fiber termination point.
The CNFE2004S1B works with any IP camera, access control reader, or networked device that outputs 10/100 BASE-T Ethernet. No vendor lock-in — pair it with Axis, Hikvision, Hanwha, Uniview, or any standard ONVIF-compliant system. The optical output (100 BASE-FX, SC single-mode connector) connects directly to fiber infrastructure or to a matching media converter at the head-end. If your NVR or PoE switch sits 15+ km away from the camera location, this converter bridges that gap without signal regeneration equipment in the middle.
Operating temperature range of −40°C to +75°C and humidity tolerance to 95% non-condensing means it survives outdoor equipment cabinets, utility enclosures, and uncontrolled environments. Power consumption is 3W without PoE load — minimal draw on backup batteries. The auto-negotiation on electrical ports handles 10 or 100 Mbps automatically; no manual speed configuration needed. Comnet's exclusive Demux feature allows port isolation across a single fiber, and Link Fault Pass-Through detects copper-side failures and triggers optical port state changes to alert the head-end — useful for redundancy monitoring. NEMA TS-1/TS-2 compliance ensures traffic signal and highway deployment eligibility if applicable.
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more Comnet products? Shop the full Comnet catalog →
Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.
Fixed scope • Fixed price