Product images are provided for reference and may not represent the exact model, configuration, or included components.

Overview

SKU: CNFE2004M1B
Condition: New
Write a Review 41% OFF

Comnet 2TX TO 1 FX 100Mbps Media Converter (B) SC Connector mm 1 fiber - CNFE2004M1B

Comnet CNFE2004M1B 2-Channel 100Mbps Media Converter Overview The CNFE2004M1B converts two 10/100 Mbps copper Ethernet ports into a single 100 Mbps op…

$1,948.00 $1,140.99 SAVE $807
Ships same business day
In stock

Quantity:

Adding to cart… The item has been added
Compatibility guidance available for your deployment
Senior specialists for pre and post-sales support
Authorized sourcing and documentation support
Shipping and lead-time confirmation before install

Laura Bennett, IPSD Senior Specialist

Talk to Laura

200+ hrs training • U.S - based

Senior Specialist • 877-277-7147

Comnet 2TX TO 1 FX 100Mbps Media Converter (B) SC Connector mm 1 fiber - CNFE2004M1B

$1,948.00
$1,140.99

Overview

SKU: CNFE2004M1B
Condition: New

No Bots, Just Experts

Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.

Description

Comnet CNFE2004M1B 2-Channel 100Mbps Media Converter

Overview

The CNFE2004M1B converts two 10/100 Mbps copper Ethernet ports into a single 100 Mbps optical port, solving the distance and isolation problem when running surveillance equipment across long cable runs or in electrically noisy environments. This is the core workhorse for extending network video feeds beyond standard twisted-pair limits — typical deployments place one unit at the camera head-end (electrical in, fiber out) and a mirror unit at the recorder or switch (fiber in, electrical out). Single-mode fiber reach of 20 km (12 miles) means you can separate your camera tier from your core infrastructure without repeaters.

Compatibility

Supports any standard 10/100 BASE-T Ethernet device: IP cameras with RJ-45 output, PoE injectors, network switches, or NVRs. Auto-negotiation on electrical ports handles both 10 Mbps and 100 Mbps speeds, full or half duplex. Automatic MDI/MDI-X crossover eliminates cable type concerns. Optical port accepts ST or SC connectors (CNFE2004M1B uses SC multimode connectors; single-mode variants available separately). The exclusive Demux feature allows port isolation — useful when you need to replicate a media converter pair across a single fiber strand for redundancy or multi-site aggregation.

Installation Notes

Operating temperature range -40°C to +75°C handles outdoor cabinet and unheated warehouse environments. Meets NEMA TS-1/TS-2 and Caltrans traffic signal specifications for harsh industrial settings. Optional 30W or 60W PoE+ models (CNFE2004M1BPOE or CNFE2004M1BPOEHO) can inject power directly into copper ports — powered by 48–56 volt DC supply (sold separately). Link Fault Pass-Through detects copper-side failure and signals the optical port state change, allowing head-end equipment to detect fiber break or camera-side power loss. Wide AC/DC input voltage tolerance handles high-line/low-line supply variations common in remote locations.

Specifications
Data Rate: 10/100 Mbps
Ethernet Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3at
Optical Port: 100BASE-Fx
Electrical Ports: 2 x 10/100 BASE-T/Tx
Optical Connectors: SC or ST
Fiber Count: 1 or 2
Multimode Distance: 3 km (2 mi)
Singlemode Distance: 20 km (12 mi)
PoE Power: 30W or 60W
PoE Standard: 802.3at
Operating Temperature: -40° C to +75° C
Storage Temperature: -40° C to +85° C
Operating Humidity: 0% to 95% (Non-condensing)
MTBF: >100,000 Hours
Power Consumption: 3W (without PoE load)
Standard Size LxWxH: 6.1 x 5.3 x 1.1 IN (15.5 x 13.5 x 2.8 CM)
Mini Size LxWxH: 4.1 x 3.7 x 1.1 IN (10.4 x 9.4 x 2.8 CM)
Shipping Weight:
Fault Relay Response Time: 25 msec typical
Q&A
Reviews
Have Questions?

RELATED PRODUCTS

System Design, Deployment & Technical Support

Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.

Fixed scope • Fixed price

System Design Assistance

  • Get help validating product compatibility
  • Coverage requirements
  • Storage planning and deployment architecture before you buy.
Request Design Help

Deployment & Configuration Support

  • Access fixed-scope support for rollout planning
  • User setup guidance
  • Migration and system standardization across single-site or multi-site deployments
View Support Services

Guides, Tools & Calculators

  • PoE requirements
  • Storage retention
  • Camera selection and deployment methodology
Open Technical Resources