ACTi ZNR-127 16-Channel Mini Standalone NVR
Overview
The ACTi ZNR-127 is a 16-channel compact standalone network video recorder designed for small surveillance installations where centralized local recording and playback are required without a PC or external server. The ZNR-127 handles 64 Mbps aggregate throughput—enough for 16 standard-definition or mixed-resolution IP camera feeds running 24/7. This is the right choice for retail sites, small office buildings, or warehouse areas where you need reliable archiving and instant local playback but space is limited and budget constraints prevent deploying a full NVR appliance or VMS infrastructure.
Compatibility
The ZNR-127 accepts any ONVIF-compliant IP camera. ACTi's own camera lines (including the ZNR series partner cameras and third-party vendors' ONVIF Profile S-compatible devices) integrate directly. Verify that your camera subnet and the recorder's network interface can sustain the total bitrate—64 Mbps aggregate is a hard ceiling. If you're mixing high-frame-rate cameras (30 fps at higher resolutions), throughput will saturate quickly; prioritize lower bitrates or reduce frame rates on lower-priority feeds. The unit outputs video via HDMI and VGA (VGA capped at 640×480 resolution), so legacy monitors and standard displays both work. Remote access via the built-in web interface supports standard browsers; mobile viewing depends on your network's external connectivity and firewall rules.
Installation Notes
The ZNR-127 requires DC 12V power supply (not included). Ensure your power source can handle the unit's load—check the power supply amperage against the recorder's consumption when all 16 channels are recording simultaneously. The 1-bay design holds a single 3.5-inch SATA HDD; storage disks are not bundled, so budget for a surveillance-grade drive separately. Install in a climate-controlled environment; no operating temperature range is specified in available evidence, so treat it as a standard indoor appliance (avoid direct sunlight, excessive heat, or moisture). Network wiring should be PoE-capable if your cameras require it, but the recorder itself does not draw PoE—it needs DC power on its own terminal.
What's in the Box
- 1x ACTi ZNR-127 unit
- Power supply and cabling (verify DC 12V rating with your order confirmation)
- Network cable (exact length not specified in evidence)
