Datalogic

SKU: DLR-SLED02-US

Datalogic DLR-SLED02-US Memor RFID Sled Accessory

RFID sled for Datalogic Memor with US-POGO connector

• Genuine OEM accessory compatible with Datalogic Memor devices
• US-POGO pin connection for secure, reliable electrical contact
• Bluetooth v4.2 wireless connectivity for mobile data capture

ELO Touch

SKU: E673037

ELO Touch Elo Edge Connect RFID Reader - E673037

• Combines RFID reading and barcode scanning in one unit for multi-format data capture.
• Elo Edge Connect interface integrates directly into ELO-based POS and inventory systems.
• Built for high-volume retail and warehouse deployments requiring reliable daily throughput.

Geovision

SKU: 81-SSUHKTG-1004

Geovision 81-Ssuhktg-1004 Gv-Uhf Tag

• UHF RFID tag triggers PTZ camera pan, tilt, zoom, and event logging automatically.
• Pairs with Geovision IP PTZ camera systems for wireless object and personnel tracking.
• Industrial-grade build suits typical indoor and light outdoor surveillance deployments.

Geovision

SKU: GV-RU9003

Geovision GV-RU9003 GV-RU9003 Outdoor UHF RFID Reader

Outdoor UHF RFID reader with long-range detection for access control

• UHF RFID technology enables long-range tag reads for gate and perimeter access control.
• Outdoor-rated weatherproof housing supports permanent exterior mounting in exposed sites.
• Compact 12.5 × 11.25 × 4 in form factor integrates with IP-based access control platforms.

Geovision

SKU: GV-UHF

Geovision GV-UHF Gv-uhf Tag

UHF RFID reader for Geovision NVR/DVR access control integration

• Operates at 902–928 MHz (US) / 865–868 MHz (EU) with up to 10-meter read range.
• Outputs Wiegand 64-bit credentials, compatible with most access control panels.
• IP56-rated housing withstands -20°C to 55°C for outdoor vehicle deployments.

Janam

SKU: RFD-T1-002UL

Janam Attachable RFID Reader For XT2 Series - RFD-T1-002UL

• Attachable RFID reader module for Janam XT2 mobile computers
• Powered directly from host XT2 battery — no extra charger
• Adds RFID capture to existing XT2 fleet without replacement

PioneerPOS

SKU: T3P-RFR202

PioneerPOS Proximity RFID Reader Dual Band USB-A - T3P-RFR202

• Dual-band 125 kHz and 13.56 MHz support bridges legacy and NFC/MIFARE deployments.
• USB-A plug-and-play eliminates external power supplies and serial adapters at the terminal.
• Sub-100 ms read cycles sustain high-throughput card processing at busy POS lanes.

PioneerPOS

SKU: T3S-RFR104

PioneerPOS RFID Reader (Keyboard Output) for T3S - T3S-RFR104

• Dual-frequency 13.56 MHz and 125 kHz support eliminates need for separate readers.
• USB keyboard emulation requires no drivers or middleware for instant POS integration.
• Bus-powered USB-A connection simplifies deployment on T3S terminals without adapters.

PioneerPOS

SKU: Q12-T3P-RFR200

PioneerPOS RFID Reader 125kHz & 13.56MHz USB-A - Q12-T3P-RFR200

• Reads both 125kHz (EM4100/4200) and 13.56MHz (Mifare, ISO 14443A/B, NFC) from one unit.
• USB-A plug-and-play connection requires no external power supply or serial adapter.
• Supports mixed-credential facilities, eliminating duplicate hardware during card migrations.

PioneerPOS

SKU: 49B-B1-RF001

PioneerPOS RFID Reader USB Dual Band - 49B-B1-RF001

• Dual-band RFID handles mixed legacy and modern tag standards in one unit.
• USB interface enables plug-and-play integration with any POS terminal or workstation.
• No external power supply or controller board required, reducing deployment complexity.

Socket Mobile

SKU: TX4133-3374

Socket Mobile TX4133-3374 1d/2d Nfc-rfid Scanner

1D/2D barcode + NFC-RFID read/write for retail and mobile POS

• Reads 1D/2D barcodes and performs NFC-RFID read/write in a single handheld unit.
• USB wired and wireless modes let you deploy at fixed POS or mobile carts without hardware swaps.
• Bidirectional NFC-RFID access enables asset-state updates and inventory lookups on the same device.

Socket Mobile

SKU: TX4136-3377

Socket Mobile TX4136-3377 1d/2d Nfc-rfid Scanner

1D/2D barcode + NFC-RFID scanner for warehouse and retail inventory

• Reads and writes 1D/2D barcodes and NFC-RFID tags from a single handheld device.
• NFC-RFID write capability enables dynamic asset tagging and pallet-level tracking.
• On-device charging keeps the scanner in workflow without daily docking-station returns.

Socket Mobile

SKU: TX4137-3378

Socket Mobile TX4137-3378 DScan D751 NFC-RFID Scanner

1D/2D barcode + NFC-RFID read/write in compact handheld form

• Dual 1D/2D barcode and NFC-RFID read/write eliminates the need for two separate devices.
• Native tag encoding support enables real-time asset updates without secondary reader infrastructure.
• Compact handheld form factor supports untethered deployment across warehouse and field locations.

Socket Mobile

SKU: TX4139-3380

Socket Mobile TX4139-3380 NFC-RFID Scanner with Charging

1D/2D barcode + NFC-RFID reader/writer in compact handheld form

• Reads 1D/2D barcodes and writes NFC-RFID tags in one device, cutting hardware per station.
• USB interface connects to POS systems and WMS platforms with no proprietary drivers required.
• Rated -40°C to +85°C, supporting cold-chain, outdoor, and temperature-variable deployments.

Socket Mobile

SKU: TX4140-3381

Socket Mobile TX4140-3381 1D/2D NFC-RFID Scanner with Charging

1D/2D barcode + NFC-RFID scanner with Bluetooth and charging dock

• Reads 1D/2D barcodes and NFC-RFID tags, covering dual-capture workflows in one device.
• Bluetooth connectivity enables untethered scanning across pallet, shelf, and floor levels.
• Included charging dock eliminates shift downtime and simplifies multi-unit power management.

Socket Mobile

SKU: TX4141-3382

Socket Mobile TX4141-3382 1d/2d Nfc-rfid Scanner

1D/2D barcode + NFC-RFID read/write for warehouse and retail ops

• Reads 1D/2D barcodes and UPC without requiring precise label alignment.
• Integrated NFC-RFID read/write eliminates line-of-sight dependency for asset tracking.
• Single handheld device handles both barcode and RFID workflows, reducing carried equipment.