Eaton · 103004336

Eaton CAN Bridge Card (for the 9155) - 103004336

CAN Bridge Card designed specifically for the Eaton 9155 platform

• CAN bridge card for Eaton 9155 UPS platform
• Controller Area Network connectivity for industrial integration
• Bridges 9155 to building management and SCADA systems

Eaton · 124100017-001

Eaton Powerware 9155 (Parallel Cabinet) - 124100017-001

• Powerware 9155 parallel cabinet for UPS load scaling
• Synchronizes multiple UPS units in parallel configuration
• Increases capacity without single-unit replacement

Eaton · 0DT60002

Eaton PS/2 to USB Converter TAA - 0DT60002

PS/2 to USB converter designed to bridge legacy PS/2 peripherals (keyboards, mice) into modern USB-enabled systems

• PS/2-to-USB converter for legacy peripheral integration
• Passive adapter requires no drivers or external power
• Bridges PS/2 keyboards and mice into USB systems

ELK Products · ELK-P1224

ELK Products 12Vdc Power Supply Battery Charger P1224 - ELK-P1224

12Vdc power supply and battery charger designed to deliver consistent DC power to access control panels, readers, and associated hardware in

• 12VDC power supply and battery charger for access control loads
• Powers ELK panels, readers, and door hardware off one supply
• Drops into commercial security installation power architecture

ELK Products · ELK-319DG

ELK Products ELK-319DG ELK Security Accessory

3VDC access control accessory for ELK security systems

• Wireless door and window contact for ELK 319 series panels
• Two CR2032 lithium coin cells - long battery life on standby
• Operates -40 to 140 degrees F for unheated outdoor and freezer use

ELK Products · ELK-319DR

ELK Products ELK-319DR ELK Security Accessory

Keypad reader designed for PIN-based credential input within ELK Products access control systems

• Wireless PIN-entry keypad reader for ELK 319 access control
• PIN credential entry for secondary doors, suites, and loading docks
• Integrates with ELK access panels without dedicated reader wiring

ELK Products · ELK-44

ELK Products ELK-44 ELK Security Accessory

Compact USB-based controller designed for security monitoring and data acquisition in access control and sensor integration scenarios

• USB controller for ELK security monitoring and data acquisition
• 8-10V input range with USB Virtual Com Port host connection
• Connects ELK panel data to PC for logging and integration

ELK Products · ELK-45

ELK Products ELK-45 ELK Security Accessory

Wireless panic button designed for portable emergency activation within ELK security system environments

• Wireless personal panic button for ELK security systems
• Keychain form factor (52 x 54.5 x 10 mm) for staff and resident carry
• CR2032 coin cell power - no wiring or external supply needed

ELK Products · ELK-603022

ELK Products ELK-603022 90° Swivel Mounting Bracket

90° swivel bracket for ELK 6030P reader positioning

• 90-degree swivel mounting bracket for ELK 6030P PIR sensor
• Wall, ceiling, corner, column, or rack mount placement options
• Aims sensor field of view for optimal coverage angle

ELK Products · ELK-6051

ELK Products ELK-6051 ELK Security Accessory

Diagnostic accessory for ELK security platforms that enables event data retrieval and system monitoring through the LINK diagnostic app

• Diagnostic accessory pulls event data from ELK sensors via LINK app
• Surfaces sensor events without touching panel programming
• Drop-in tool for field service techs validating wireless sensor health

ELK Products · ELK-74

ELK Products ELK-74 ELK Security Accessory

Prototyping platform for the PA165 power amplifier, supplied as a complete evaluation kit with all components included

• PA165 power amplifier evaluation kit with all components included
• Dual-supply circuit board with proper ground plane layout
• Bench prototyping platform for security audio amp validation

ELK Products · ELK-C1M1LTEV

ELK Products ELK-C1M1LTEV Cellular Communicator Module

LTE Verizon cellular module for ELK control panels with nationwide coverage

• Verizon LTE cellular alarm communicator for ELK panels
• Outbound UDP on ports 3061 and 3071 to central station receivers
• Wall, pole, corner, or column mount for signal-optimal placement

ELK Products · ELK-M1EZ8KB

ELK Products ELK-M1EZ8KB M1Ez8 Kit With Enclosure

M1Ez8 enclosure kit with professional wall-mount hardware

• Complete M1Ez8 control kit with integrated metal enclosure
• Professional mounting hardware included for wall-mount install
• Drops into commercial and residential ELK system deployments

ELK Products · ELK-M1EZ8KBS

ELK Products ELK-M1EZ8KBS M1Ez8 Control Panel Kit

M1Ez8 control panel kit with metal enclosure for access control and alarm monitoring

• M1Ez8 control panel plus metal enclosure shipped as one kit
• Mounting hardware included for wall or cabinet placement
• Drops into commercial and residential ELK system deployments

ELK Products · ELK-M1GSYS3

ELK Products ELK-M1GSYS3 M1 Gold Control Panel Kit with Enclosure

M1 Gold control panel kit with metal enclosure, keypad sold separately

• M1 Gold control panel with metal enclosure (no built-in keypad)
• Operator interface flexibility - pair with any ELK keypad you prefer
• Drops into integrator-supplied access and alarm deployments

ELK Products · ELK-M1GSYS4

Elk Products ELK-M1GSYS4 M1 Gold Access Control Kit

M1 Gold controller + wall enclosure for multi-door access control

• M1 Gold controller bundled with M1Kp keypad housing in one kit
• 12V solenoid and magnetic lock compatible for door strike control
• Drops into residential and light-commercial access deployments

ELK Products · ELK-M1GSYS4STW

Elk Products ELK-M1GSYS4STW M1 Gold Two-Way Control Kit

M1 Gold control kit with built-in two-way voice and pre-wired enclosure

• M1 Gold control kit with built-in two-way voice intercom module
• Central station can speak directly to occupants for alarm verification
• Drops into residential and commercial ELK deployment installs

ELK Products · ELK-P412

ELK Products ELK-P412 12VDC Battery Charger

12VDC charger for ELK control panels during mains power loss

• 12VDC regulated battery charger for ELK security panel systems
• Stable output prevents false alarms during AC dropout transitions
• 12 x 12 x 3.5 in enclosure with 6-foot AC power cord included

ELK Products · ELK-P624

ELK Products ELK-P624 6VDC Battery Charger and Power Supply

6VDC battery charger and power supply for ELK security panels

• 6VDC battery charger and power supply for ELK control panels
• Regulated output prevents voltage sag during high-load transitions
• Compact 3 x 3 in (76.2 mm) housing for in-cabinet placement

ELK Products · ELK-SP15

ELK Products ELK-SP15 ELK Security Accessory

Wired speaker accessory designed to deliver audible alerts and notifications from ELK control panels across residential and light commercial spaces

• Wired speaker for audible alerts from ELK control panels
• Direct ELK panel audio output - no amplifier required
• Low-voltage wiring matches standard ELK security install practices

ELK Products · ELK-M1GK

ELK Products M1 Gold Kit Without Enclosure M1Kp M1Gk - ELK-M1GK

M1 Gold Kit component set for custom cabinetry integration without enclosure

• M1 Gold control kit (no enclosure) for custom mounting needs
• Modular components support ELK M1 expansion and reconfiguration
• Drops into integrator-supplied enclosures or rack-mount installs

ELK Products · ELK-M1GCB

ELK Products M1 Gold Security And Automation Control - ELK-M1GCB

Hardwired security and home automation control system designed for residential and light commercial installations where you need a single platform to

• M1 Gold hardwired security and home automation control system
• Hardwired zones plus optional IP integration for remote monitoring
• 12 VDC operation matches standard ELK panel power architecture

ELK Products · ELK-M1XSLU

ELK Products M1 To Lutron Radiora2 Serial Interface - ELK-M1XSLU

Serial gateway that integrates Lutron Radiora2 lighting control systems with ELK M1 security panels

• RS-232 serial gateway between ELK M1 and Lutron RadioRA2
• Translates M1 commands to RadioRA2 lighting control protocol
• Drops into existing ELK M1 deployments for lighting automation

ELK Products · ELK-M1EZ8MSI

ELK Products M1Ez8 Main Serial Interface M1Ez8Msi - ELK-M1EZ8MSI

Serial interface module that extends RS-232 communication capability on ELK M1 control panels

• RS-232 serial interface module for ELK M1 control panels
• Integrates third-party keypads, modems, and home automation gear
• Drops onto ELK M1Ez8 bus for serial-device extensibility

ELK Products · ELK-P1215K

ELK Products Power Supply Battery Charger P1215K - ELK-P1215K

240V AC input battery charger and power supply unit designed to bridge primary AC infrastructure and battery-backed access control loads

• Battery charger and power supply with 240V AC input, 12V DC output
• Trickle-charges backup battery while powering access control loads
• Compatible with electromagnetic strikes, locks, and credential readers

ELO Touch · E203787

ELO Touch 1537L Inlin Brackets - E203787

Steel in-line bracket designed to securely mount the ELO 1537L touchscreen monitor in a counter-recessed configuration

• Steel construction provides durable, rigid support for the ELO 1537L in counter deployments.
• In-line bracket design enables clean cable routing and a low-profile counter-mount installation.
• OEM-matched accessory ensures proper fit and maintains full warranty compliance for the 1537L.

ELO Touch · E001178

ELO Touch 1930L/1931L Pcap Flushmount Braket - E001178

Powder-coated steel flush-mount bracket kit designed for recessed wall installations of ELO 1930L and 1931L PCAP touchscreen monitors

• Enables flush/recessed wall installation of Elo 1930L and 1931L PCAP monitors.
• Powder-coated steel construction provides durable, corrosion-resistant mounting support.
• OEM hardware kit ensures precise fit and maintains full US warranty on the display.

ELO Touch · E044162

ELO Touch 2-position adjustable table-top stand for 15 - E044162

2-position adjustable tabletop stand engineered for 15-inch I-Series interactive displays

• Two fixed-angle positions support both operator-side and customer-facing display orientations.
• Tabletop base requires no wall or ceiling mounting, simplifying deployment at checkout stations.
• Engineered specifically for 15-inch ELO I-Series displays, ensuring a verified mechanical fit.

ELO Touch · E352783

ELO Touch 22-INCH Privacy Screen 03-SERIES Medical - E352783

Privacy screen designed to limit viewing angles on compatible 22-inch ELO 03-Series medical monitors

• Polycarbonate film limits side-angle viewing, protecting sensitive patient data on-screen.
• Sized for 22" ELO 03-Series Medical monitors—no cutting or modification required.
• Adhesive and slide-in mount options support both permanent and removable deployment.

ELO Touch · E297107

ELO Touch 2294L 21.5-inch wide FHD LCD WVA (LED - E297107

2294L 21.5-inch wide FHD LCD WVA (LED Backlight), Open Frame, HDMI, VGA & Display Port video interface, PCAP Bezel Drop-in Replacement for SAW, USB &

• 21.5-inch FHD WVA panel delivers wide viewing angles for kiosk or control-room use.
• HDMI, VGA, and DisplayPort inputs simplify integration into mixed AV and IT environments.
• PCAP touch with USB and RS232 interfaces supports both modern and legacy controller setups.

ELO Touch · E352977

ELO Touch 24-INCH Privacy Screen 03-SERIES Medical - E352977

Designed to restrict viewing angles on compatible ELO 03-Series medical monitors

• Polycarbonate film construction limits side-angle viewing on 24" medical displays.
• Designed specifically for ELO 03-Series Medical Monitors ensuring precise fit.
• Adhesive and slide-in mount options support flexible installation without tools.

ELO Touch · E000879

ELO Touch 2440L PCAP Flushmount Braket - E000879

Steel flush mount bracket designed to securely integrate the ELO 2440L PCAP touchscreen monitor into custom enclosures or wall installations

• Steel construction provides rigid, durable support for the ELO 2440L PCAP monitor.
• Flush mount design integrates the 2440L cleanly into walls or enclosures.
• Purpose-built fit for the ELO 2440L PCAP eliminates adapter compatibility guesswork.

ELO Touch · E353170

ELO Touch 27-INCH Privacy Screen 03-SERIES Medical - E353170

• Polycarbonate film limits side-angle viewing, protecting sensitive patient data on-screen.
• Designed specifically for ELO 03-Series 27" medical monitors—no fitment guesswork.
• Adhesive and slide-in mount options support flexible installation without permanent modification.

ELO Touch · E988153

ELO Touch 4K Conference Camera KIT - E988153

• Genuine OEM kit ensures hardware compatibility for ELO Touch field repairs.
• Factory-new components support a full US warranty path for service deployments.
• Sourced direct from manufacturer or US distributor for verified part authenticity.

ELO Touch · E093433

ELO Touch Accessory 1-D Barcode Reader (bcr); Micro - E093433

Compact 1-D barcode reader designed for retail, warehouse, and inventory management environments

• 1-D barcode scanning supports standard retail and warehouse barcode formats.
• Micro form factor fits space-constrained POS and inventory counting stations.
• Designed as a drop-in accessory for ELO Touch POS and transaction terminals.

ELO Touch · E873133

ELO Touch Android 3 YR EloCare OS 360 for Elo I-Series - E873133

Android 3 YR EloCare OS 360 for Elo I-Series 4, Backpack 4, M50, Elo Pay M60

• Covers Android lifecycle management for I-Series 4, Backpack 4, M50, and Pay M60.
• 3-year subscription ensures consistent OS 360 support across the full device fleet.
• EloCare OS 360 reduces admin overhead with centralized lifecycle management tools.