Middle Atlantic SNE 24W 660CFM Topw/fc - SNE24-6FT-FC-K-U

Middle Atlantic SNE24-6FT-FC-K-U 600 CFM Fan Top with Controller for 24" SNE Racks

Overview

The Middle Atlantic SNE24-6FT-FC-K-U is a rack-mount fan top assembly purpose-built for 24-inch SNE series enclosures, delivering 600 CFM of airflow with an integrated fan controller — the combination that keeps heat-sensitive security and AV electronics in spec under continuous load. If you're stacking Middle Atlantic SNE rack enclosures in a head-end room, IDF closet, or operations center, this unit addresses the thermal management question without requiring a separate controller shelf or external thermostat.

At 22.2 inches wide by 19.8 inches deep and only 2.2 inches tall, the SNE24-6FT-FC-K-U mounts directly to the top of compatible SNE rack enclosures without consuming usable rack unit space inside the cabinet — a genuine advantage when you're already juggling NVRs, PoE switches, and access control hardware in a tight enclosure footprint. Available in black to match the SNE enclosure finish.

Key Features

• 600 CFM Airflow Capacity: Moving 600 cubic feet of air per minute provides meaningful throughput for a fully populated 24-inch enclosure running multiple active devices — switches, recorders, and power equipment generating sustained heat. Under-spec'ed fan tops stall at peak load; 600 CFM leaves headroom for thermal spikes without thermal throttling downstream gear.
• Integrated Fan Controller: The included controller allows fan speed regulation rather than running fans at full blast continuously. In occupied spaces — reception areas, small operations rooms — constant full-speed fan noise is a real complaint. Speed control lets you tune acoustic output to the environment without sacrificing thermal safety.
• 24-Inch Width, SNE-Specific Fit: Dimensioned at 22.2 x 19.8 x 2.2 inches specifically for 24-inch SNE enclosures. This is a precision-fit accessory, not a universal unit — it drops cleanly into position on SNE racks without adapter hardware or field modification. Verify your enclosure is the 24-inch SNE variant before ordering; Middle Atlantic makes other enclosure widths with their own fan top SKUs.
• Top-of-Rack Mounting Position: Hot air rises — mounting the fan assembly at the top of the enclosure aligns with basic convective airflow principles. The SNE24-6FT-FC-K-U pulls rising heat out of the cabinet directly, reducing recirculation of hot air back through sensitive components on lower shelves.
• 2.2-Inch Profile (Rack-Top, Not Rack-Unit): At 2.2 inches tall, this unit sits on top of the enclosure rather than occupying internal rack units. You don't give up a 1U or 2U slot inside the rack to run active cooling — every unit of internal space stays usable for actual equipment.
• Indoor Rack Enclosure Application: Rated for indoor use within SNE rack enclosures — appropriate for controlled environments like server rooms, telecom closets, security head-end rooms, and AV equipment bays. Not intended for outdoor or wet-location enclosures; plan accordingly if your installation involves a NEMA-rated outdoor cabinet.
• Black Finish: Color-matched to the SNE enclosure line, so the top unit integrates visually with the rest of the rack assembly — relevant in client-facing installations where equipment aesthetics matter alongside function.

Integration & Compatibility

The SNE24-6FT-FC-K-U is designed exclusively for Middle Atlantic SNE rack enclosures in the 24-inch width configuration. If you're specifying a full enclosure build, pair this fan top with the appropriate SNE chassis and consider complementary rack power and management accessories — UPS units, surge-protected PDUs, and cable management — to complete the thermal and power architecture. For guidance on building out a complete rack system for a security or AV deployment, refer to a rack planning guide covering airflow, power budgeting, and cable routing best practices.

Before ordering, confirm the SNE enclosure width in your project BOM. Middle Atlantic's SNE line spans multiple widths, each requiring the matched fan top SKU. The SNE24-6FT-FC-K-U (often searched as SNE24 6FT FC K U) is the 24-inch variant — the part number encoding makes the width explicit, but double-check against your enclosure model number if there's any ambiguity on-site.

Frequently Asked Questions

Q: Which rack enclosures is the SNE24-6FT-FC-K-U compatible with?

A: The SNE24-6FT-FC-K-U is designed specifically for Middle Atlantic SNE series rack enclosures in the 24-inch width. It mounts to the top of the SNE enclosure and is not intended for other enclosure brands or different SNE width configurations.

Q: Does the SNE24-6FT-FC-K-U include a fan speed controller?

A: Yes. The fan controller is included with the unit. This allows speed regulation to balance thermal performance against acoustic output depending on the installation environment.

Q: How much airflow does the SNE24-6FT-FC-K-U deliver?

A: The unit is rated at 600 CFM (cubic feet per minute), providing active airflow suitable for a fully populated 24-inch SNE enclosure running heat-generating equipment under continuous load.

Q: Does this fan top consume internal rack unit space?

A: No. The SNE24-6FT-FC-K-U mounts on top of the SNE enclosure — it measures 2.2 inches in height and sits externally above the rack. No internal 1U or 2U space is sacrificed for the cooling assembly.

Q: Is the SNE24-6FT-FC-K-U suitable for outdoor installations?

A: No. The unit is rated for indoor use within rack enclosures. It is not designed for outdoor, wet-location, or NEMA-rated outdoor cabinet applications.

Q: What are the physical dimensions of the SNE24-6FT-FC-K-U?

A: The unit measures 22.2 inches wide by 19.8 inches deep by 2.2 inches tall (W x D x H), sized to fit the top of 24-inch SNE enclosures.