Middle Atlantic SNE 24W Vent Fd/rd 42U - SNE24-LVD-42

Middle Atlantic SNE24-LVD-42 42U Vented Front/Rear Door for SNE24 Series Racks

Overview

The Middle Atlantic SNE24-LVD-42 is a 42RU vented door designed specifically for 24-inch SNE Series racks. With a 64% open vent area across its 76.08-inch height, this door delivers passive airflow management without the complexity or cost of active cooling solutions — making it the right call for AV distribution, security system head-end, and network edge enclosures where heat buildup is a genuine concern but a full CRAC unit is overkill. If you're running a network video recorder stack or multi-channel encoder chassis in a 24-inch SNE enclosure, the SNE24-LVD-42 (often searched as SNE24 LVD 42) keeps thermals in check without adding fan noise or power draw to the rack.

Key Features

• 64% Vented Open Area: Nearly two-thirds of the door face is open perforation — this isn't a token vent strip, it's aggressive passive airflow. That level of open area meaningfully reduces hot-spot buildup inside the enclosure without requiring any fan trays or powered cooling, which matters in occupied spaces where fan noise is unacceptable.
• 42RU Capacity Match: Designed to cover a full 42RU enclosure height, so the vent area spans the entire active equipment zone. Partial-height doors leave the bottom or top of the rack thermally unmanaged — this door doesn't.
• 76.08-Inch Panel Height: The precise panel height (76.08 inches) is matched to the SNE24 series rack frame dimensions, ensuring flush alignment with no gaps that could create bypass airflow paths or compromise the enclosure's cable management profile.
• 24-Inch Width Compatibility: Sized for 24-inch-wide SNE Series racks — not a universal fit. If your enclosure is the 19-inch or 26-inch SNE variant, this door won't align. Confirm your rack width before ordering.
• Black Finish: Standard black powder coat integrates with the SNE Series rack aesthetic and standard equipment room finishes. No color mismatch issues in mixed-brand environments.
• SNE Series System Integration: Built as a native accessory for the Middle Atlantic SNE line, so mounting hardware, hinge points, and latch geometry are all engineered to the same tolerances as the rack frame — no adapter plates, no shimming, no field fabrication.

Integration & Compatibility

The SNE24-LVD-42 is compatible exclusively with SNE24 Series 24-inch racks from Middle Atlantic. It is not designed for retrofit into non-SNE enclosures or competitor rack frames. If you're deploying the door as part of a new SNE24 rack build, it pairs directly with standard SNE24 rack frames and is available as either a front or rear door position — verify the intended position (front/rear) against your specific SNE24 rack configuration before ordering. For environments deploying these racks as part of a broader rack enclosure strategy — particularly security operations centers or IDF closets running PoE switches and NVRs — the 64% open area provides adequate passive ventilation for moderate equipment density. High-density deployments with full server loads may still require supplemental rack cooling solutions alongside this door.

Frequently Asked Questions

Q: Will the SNE24-LVD-42 fit a standard 19-inch rack?

A: No. The SNE24-LVD-42 is engineered specifically for Middle Atlantic SNE24 Series 24-inch racks. It will not correctly mount to 19-inch rack frames.

Q: What is the vent open area percentage on the SNE24-LVD-42?

A: The SNE24-LVD-42 provides 64% open vent area, which enables substantial passive airflow through the enclosure without requiring powered cooling.

Q: Can this door be used as both a front and rear door?

A: The SNE24-LVD-42 is listed as a vented front/rear door for the SNE24 series. Confirm your specific rack model's door mounting configuration to verify front vs. rear installation position.

Q: What are the panel dimensions of the SNE24-LVD-42?

A: The door panel measures 24 inches wide and 76.08 inches tall, covering the full 42RU height of the SNE24 series rack.

Q: Does the SNE24-LVD-42 include mounting hardware?

A: Package contents are not specified in available product documentation. Contact your supplier to confirm what hardware ships with the door before installation planning.