Altronix · T1M1CK1V

Altronix T1MK1F4SV/MAG/FUSED/220VAC - T1M1CK1V

Compact, fused power distribution module designed to provide reliable, regulated 12VDC power to a single surveillance device

Altronix · T1M1LCK1DQ

Altronix T1MK1L4DQ/MAG/PTC/115VAC - T1M1LCK1DQ

Pack of magnetic cable tie mounts designed for rapid, tool-free installation of cables onto ferrous metal surfaces

Altronix · T1M1LCK1Q

Altronix T1MK1L4Q/MAG/FUSED/115VAC - T1M1LCK1Q

Magnetic cable tie mount designed for quick, tool-free installation of cables or small devices onto ferrous metal surfaces

Altronix · T1MK3L4DQPPT

Altronix T1MK3L4DQPPT 6A Mercury Power Kit

6A Mercury power kit for 4-door access control systems

• Delivers 24VDC at up to 12A across 12 outputs for dense multi-door deployments.
• Supports PoE++ (802.3bt) with AC Fail supervision and integrated battery backup.
• Mounts wall, pole, or rack; ships with VR6 regulator and ACMS8CB power controller.

Altronix · T1PDK7F24

Altronix T1PDK7F24 24-Door Access Control Kit

24-door access control kit with integrated power distribution

• Manages up to 24 access points from a single integrated platform, reducing field hardware.
• 24 VDC eFlow104NB module synchronizes power delivery with access control logic across all doors.
• Lifetime warranty covers the full kit, lowering long-term maintenance and replacement risk.

Altronix · T1PHK1F4SD

Altronix T1PHK1F4SD 4-Door Access Control Kit

4-door access control kit with integrated power and relay control

• Controls four independent door points via dedicated relay outputs on the included VR6 module.
• Factory-validated five-component bundle eliminates compatibility risk across power and control stages.
• Lifetime warranty covers all included modules, reducing long-term maintenance cost exposure.

Altronix · T1PHK3F8

Altronix T1PHK3F8 8-Door Access Power Integration Kit

8-door access control power kit for coordinated multi-door installations

• Supports 8 independent door circuits, reducing wiring complexity on multi-door deployments.
• Compatible with Altronix and OpenPath systems for straightforward integration into existing infrastructure.
• Backed by a Lifetime Limited Warranty, minimizing long-term replacement risk on installed hardware.

Altronix · T1PHK3LESCK1

Altronix T1PHK3LESCK1 8-Output Access Power Controller Kit

8-output access controller kit for OpenPath strike locks

• 12 independent outputs at 24VDC/12A support high-density multi-door deployments.
• Built-in AC fail supervision and battery backup maintain access control during outages.
• Wall, pole, and rack mount options simplify installation across varied site layouts.

Altronix · T1RAL33F16

Altronix T1RAL33F16 16-Door Rack Enclosure

16-door access control in one 19-inch rack enclosure

• Centralizes 16 access points in a single 19-inch rack enclosure, reducing field wiring.
• Operates at 12VDC with modular architecture for flexible control and power configurations.
• Lifetime warranty backs continuous industrial operation across demanding security deployments.

Altronix · T1RAL3L8

Altronix T1RAL3L8 8-Output Dual Voltage Rack Power System

8-output rack power system with dual voltage for security infrastructure

• 12 independent outputs at 24VDC/12A total consolidate multi-device power in one rack unit.
• AC fail supervision signals mains loss to panels or NVRs for automated failover response.
• Battery backup compatibility and rack/wall/pole mount options suit diverse installation sites.

Altronix · T1RHW3F4D

Altronix T1RHW3F4D 4-Output Rack Mount Power Distribution

4-output rack mount power distribution with integrated UPS backup

• Four supervised outputs with fault indication enable proactive circuit maintenance.
• Integrated battery backup maintains critical circuits during mains failure.
• Standard 19-inch rack mount form factor fits new deployments and retrofits.

Altronix · T1RM34

Altronix T1RM34 4-Door Fused Power Rack 115V

4-door fused power rack for 115V access control and security systems

• Four independent fused circuits provide isolated overcurrent protection per door zone.
• Rack-mount form factor integrates directly into standard 19-inch equipment cabinets.
• 115V AC input works with standard North American infrastructure; Lifetime warranty included.

Altronix · T1RM34D

Altronix T1RM34D 4-Door Rack Enclosure PTC

4-door rack enclosure with PTC thermal protection for access control

• Delivers 24VDC at up to 12A across 12 outputs for multi-device access control runs.
• Integrated PTC thermal protection and AC Fail supervision reduce unplanned downtime.
• Rack, wall, or pole mount options simplify deployment in varied facility layouts.

Altronix · T1RM3F4

Altronix T1RM3F4 Kit includes Trove1R enclosure

4-door access control kit with integrated power and 8-output distribution

• Manages four independent access points with centralized credential and relay control.
• Eight individually fused outputs with load monitoring support access and auxiliary loads.
• Integrated battery backup and voltage regulation maintain stable power across all circuits.

Altronix · T1RM3CK1

Altronix T1RM3F4 PRE-WIRED - T1RM3CK1

2U rack mount battery enclosure designed to house and protect backup batteries for Altronix power systems

Altronix · T1RM3CK1D

Altronix T1RM3F4D PRE-WIRED - T1RM3CK1D

2U rack mount enclosure designed to house and protect critical power components, including batteries and power distribution modules

Altronix · T1RM3CK1DV

Altronix T1RM3F4DV PRE-WIRED - T1RM3CK1DV

Pre-wired 1U rack mount assembly designed to streamline the installation of multiple network devices, such as IP cameras, encoders, or network

Altronix · T1RM3CK1V

Altronix T1RM3F4V PRE-WIRED - T1RM3CK1V

Pre-wired rack mount kit designed to streamline the installation of specific Altronix power distribution units within a standard 19-inch equipment

Altronix · T1RM7CK1DV

Altronix T1RM7F4DV PRE-WIRED - T1RM7CK1DV

Pre-wired rack mount kit designed to streamline the installation of specific Altronix power distribution units within a standard 19-inch rack

Altronix · T1RSH1F4

Altronix T1RSH1F4 4-Door Rack Power Controller

4-door rack mount controller with dual 12/24VDC power and fail-safe relays

• Dual 12/24VDC output at 4A supports mixed door hardware without a separate supply.
• Four independently fused relay outputs allow fail-safe or fail-secure config per door.
• 24-inch rack-mount form factor with tamper switch simplifies compliant cabinet builds.

Altronix · T1RSH3CK1

Altronix T1RSH3F8 PRE-WIRED - T1RSH3CK1

Pre-wired housing designed to simplify the installation of compatible surveillance cameras

Altronix · T1RSH3CK1D

Altronix T1RSH3F8D PRE-WIRED - T1RSH3CK1D

Pre-wired enclosure designed to streamline the installation of specific IP cameras

Altronix · T1RV3F4

Altronix T1RV3F4 Trove1R enclosure with Altronix/HID Vert

4-door access control kit with integrated power and HID VertX support

• Manages four independent door access points from a single rack-mounted integration kit.
• Supervised relay outputs provide fault detection across all four power distribution circuits.
• Supports Wiegand and IP reader protocols, reducing rewiring when mixing credential hardware.

Altronix · T1SAK34

Altronix T1SAK34 4-Door Access Power Integration Kit

4-door access power hub with dual 12/24VDC and 6A per channel

• Distributes 12/24VDC selectable power across 4 doors from a single chassis.
• 6A output capacity handles simultaneous mag-lock and door-strike loads without derating.
• Integrated fusing per circuit limits fault propagation and satisfies UL listing requirements.

Altronix · T1SAK34D

Altronix T1SAK34D Dual-Voltage 12/24VDC 6A Power Supply

Selectable 12/24VDC 6A supply for security systems with PTC protection

• Selectable 12VDC or 24VDC output eliminates field rewiring when voltage requirements change.
• 6A continuous current supports multiple locks, readers, and intercoms on a single supply.
• PTC resettable overload protection reduces service calls by eliminating blown-fuse replacements.

Altronix · T1SAK3F4

Altronix T1SAK3F4 4-Door Access Control Kit

4-door access control kit with integrated power distribution and Salto reader

• Controls four independent door points with per-door authentication and event logging.
• Bundled PDS8 and VR6 modules deliver centralized power distribution with circuit protection.
• Ships with eFlow6NB, ACM4, VR6, and PDS8 pre-matched, reducing component selection time.

Altronix · T1VK3F4

Altronix T1VK3F4 4-Door Access Control Integration Kit

4-door access control power kit with HID VertX integration and battery backup

• Supports 4 independent door outputs at regulated +12VDC via integrated VR6 module.
• 6A eFlow6NB module provides battery backup with automatic switchover for uninterrupted control.
• Native HID VertX compatibility simplifies deployment; lifetime warranty covers the full kit.

Altronix · T1V3CK1

Altronix T1VK3F4S PRE-WIRED FOR 4DR - T1V3CK1

Pre-wired kit designed to streamline the installation of four-door access control systems

Altronix · T1V3CK1D

Altronix T1VK3F4SD PRE-WIRED FOR 4DR - T1V3CK1D

Pre-wired power distribution module designed to streamline the installation of multi-door access control systems

Altronix · T24130D

Altronix T24130D 24VAC 100VA Dual-Voltage Transformer

24VAC 100VA transformer with dual 115/220VAC input for global installations

• Dual 115/220VAC input eliminates region-specific SKUs across multi-jurisdiction deployments.
• 100VA output supports 4–6 access control readers or a single alarm panel simultaneously.
• Open-frame design mounts directly to DIN rail or panel backplate—no bracket required.

Altronix · T2428100

Altronix T2428100 100VA Open Frame Transformer

100VA step-down transformer, 115VAC to 24/28VAC, open frame mount

• Steps down 115VAC to 24/28VAC at 100VA, powering 4–6 access control devices simultaneously.
• Open frame design mounts to DIN rail or backplates, reducing labor and hardware in retrofit installs.
• Compact 2.56"×3.57"×2.25" footprint leaves room for relays and terminals in shared enclosures.

Altronix · T2428100220

Altronix T2428100220 24VAC or 28VAC 100Va Xfmr 220v

220VAC to 24/28VAC step-down transformer, 100VA for access control

• Accepts 220VAC input directly, eliminating a pre-stage transformer in international installs.
• Field-selectable 24VAC or 28VAC output covers both North American and European access control devices.
• UL Listed, 100VA single-output design with a lifetime warranty for long-term deployment confidence.

Altronix · T2428100C

Altronix T2428100C 100VA Open Frame Transformer

100VA step-down transformer, 220VAC input, 24/28VAC selectable output

• 100VA / 4A output drives access control readers, electric locks, and modules simultaneously.
• Selectable 24VAC or 28VAC output covers mixed device requirements from a single unit.
• 220VAC primary input integrates directly into European, Asian, and African mains without pre-conversion.

Altronix · T2428100C220

Altronix T2428100C220 Transformer - 24VAC/100VA (4 amp)

220VAC to 24/28VAC open frame transformer, 100VA/4A for enclosures

• Accepts 220VAC mains (50/60 Hz), eliminating step-down converters in EU/international sites.
• Dual 24/28VAC output at 4A supports legacy access control and modern IP cameras from one unit.
• Open frame design mounts directly in enclosures, cutting footprint and wiring complexity.

Altronix · T2428100CP

Altronix T2428100CP 100VA Transformer Enclosure

100VA step-down transformer, 220VAC to 24/28VAC with fused protection

• Steps down 220VAC to 24/28VAC at 100VA, covering mid-range access control loads.
• Fused secondary protection limits fault damage to downstream devices and wiring.
• Integrated enclosure simplifies mounting and wiring for intercoms and electric strikes.

Altronix · T2428175

Altronix T2428175 Open Frame Transformer 175VA

175VA step-down transformer for access control and security systems

• 115VAC primary steps down to 24VAC or 28VAC, covering mixed-voltage device installations.
• 175VA capacity at 7.25A supports multiple door strikes, mag-locks, and auxiliary loads.
• Open frame design integrates directly into enclosures and control panels without added housing.