Code Blue · 41144

Code Blue 41144 PoE Power Splitter Unit

802.3af PoE splitter with IP68 weatherproofing for multi-camera setups

• Distributes 802.3af power across standard PoE security camera systems
• IP68-rated weatherproof design for indoor and outdoor deployments
• Rack-mount form factor with 850nm infrared support integration

Code Blue · 41163

Code Blue 41163 Transformer 40VA 100-277V CB2a

40VA transformer engineered for access control systems, alarm panels, and security peripherals that require regulated secondary voltage

• 40VA output powers multi-door card readers and relay modules from a single supply.
• 100–277V AC input handles 120V and 240V branch circuits without jumpers or rewiring.
• Built-in serial interface integrates directly with CB2a panels via Wiegand or RS-485.

Code Blue · 41246

Code Blue 41246 Transformer 40VA 120V-24V

Step-down transformer designed for security and low-voltage audio installations requiring stable 24V AC power

• Converts 120V AC to stable 24V AC output at 40VA for multi-device low-voltage loads.
• Built-in thermal protection prevents transformer runaway under short-circuit or overcurrent.
• Screw-down lug terminals on primary and secondary integrate with existing panel wiring.

Code Blue · 41247

Code Blue 41247 Transformer 40VA 120V-24V

40VA step-down transformer engineered for security system power distribution

• Steps 120V AC down to 24V AC at 40VA — powers up to eight 5W security devices.
• Isolated secondary winding eliminates noise coupling on analog and digital control runs.
• Screw terminals accept 14–10 AWG wire, fitting standard control boxes and DIN enclosures.

Code Blue · 41421

Code Blue 41421 IP Surge Suppressor

Network-inline surge suppressor designed to protect IP cameras, NVRs, and PoE-powered security devices from transient voltage spikes caused by

• MOV + gas discharge topology clamps 6kV+ transients before they reach PoE endpoints.
• Supports 802.3af/at/bt PoE pass-through with no voltage drop or signal degradation.
• Inline RJ45 Cat5e/Cat6 form factor installs into existing runs without recabling.

Code Blue · 41465

Code Blue 41465 IA4100/IP5000 Battery 3-Pack

Three-battery replacement kit engineered for IA4100 and IP5000 emergency communication and security system platforms

• Three-battery kit reduces service calls by enabling scheduled preventive swap-out cycles.
• Drop-in replacement for both IA4100 and IP5000 platforms simplifies multi-model parts inventory.
• OEM-matched specs maintain voltage stability and runtime during AC mains loss events.

Code Blue · 41471

Code Blue 41471 Surge Protector Analog

Surge protector designed for analog surveillance installations requiring Power over Ethernet (PoE) delivery and environmental sealing

• Suppresses lightning and switching transients to protect analog camera circuits.
• Parallel wiring configuration adds no series impedance to the protected power feed.
• Compact form factor mounts inside control panels without requiring dedicated rack space.

Code Blue · 41472

Code Blue 41472 Surge Protector Analog - 3 Pack

Passive analog surge protection module designed for security and surveillance system equipment

• Passive analog design activates instantly on voltage transient—no firmware or batteries needed.
• 3-pack covers multiple 12V DC camera feeds, alarm panels, or PoE injector outputs per order.
• Compact form fits DIN rail, junction boxes, and racks with no enclosure modifications required.

Code Blue · 41485

Code Blue 41485 Replacement Battery Kit 3pk

3-pack of replacement batteries for Code Blue security accessories

• 3-pack format reduces return trips when servicing multiple Code Blue devices.
• Direct replacement batteries maintain uninterrupted operation in deployed Code Blue accessories.
• Multi-pack supply simplifies inventory management for integrators running large installations.

Code Blue · 41537

Code Blue 41537 55Ahr Sealed Lead-Acid Battery

Sealed lead-acid battery designed to provide emergency backup power for access-control systems, intercoms, emergency lighting, and distributed

• 55Ahr SLA capacity supports 4–8 hours of backup on 7–15W access-control loads.
• Hermetically sealed, maintenance-free chemistry; installs in any orientation safely.
• 5.0 lb gross weight fits vertical or horizontal in standard UPS and power cabinets.

Code Blue · 41574

Code Blue 41574 PoE Power Assembly

IP68 PoE assembly for outdoor security cameras and network devices

• 802.3af PoE standard powers IP cameras without separate electrical runs
• IP68 enclosure rating withstands harsh indoor and outdoor conditions
• Compact form factor fits cable runs and junction boxes for flexible placement

Code Blue · 41599

Code Blue 41599 Outdoor 24V AC to 12V DC PoE Converter

24V AC to 12V DC converter with IP68 outdoor rating for thermal cameras

• Converts 24V AC input to 12V DC output for thermal camera systems
• IP68-rated enclosure withstands dust and water in outdoor installations
• PoE (802.3af) support integrates with standard security infrastructure

Code Blue · 41643

Code Blue 41643 Solar Power Update V5 to Solis

Power management and firmware bridge module designed for solar-powered remote monitoring systems transitioning from V5 architecture to Solis platform

• Accepts 12–24V DC input, bridging legacy solar charge controllers without extra hardware.
• Firmware bridge preserves existing sensor wiring while enabling Solis remote management.
• Supports off-grid deployments by integrating with existing battery banks and charge controllers.

Code Blue · 45006

Code Blue 45006 NightCharge Kit CB1 10 Amp

10-amp communication kit designed to establish rapid Ethernet connectivity between security systems and first responder networks

• Delivers 10 A capacity to sustain reliable power across Code Blue emergency units.
• Hardwired Ethernet connection maintains persistent data paths in critical deployments.
• Kit format streamlines installation into existing Code Blue security infrastructure.

Code Blue · CB1E00455

Code Blue CB1E00455 CB1e SYL BLEm Power Supply

Dedicated power supply unit designed to convert standard 120V AC input into the 12-24V DC required by specific Code Blue paging amplifiers

• Direct OEM replacement preserves CB1e Sylence BLEm amplifier system integrity.
• Accepts 120V AC input and delivers 12–24V DC output for compatible amplifiers.
• Drop-in fit eliminates reconfiguration during system transitions or repairs.

Code Blue · CB1E00471

Code Blue CB1E00471 CRD WEm NP 120v Charger

120V AC charging cradle for Code Blue CB1e series portable security and communication devices

• Charges CB1e series units via standard 120V AC wall outlet — no special wiring needed.
• Cradle design provides a fixed, secure docking point for consistent between-shift charging.
• Direct replacement component maintains charging continuity in existing CB1e deployments.

Code Blue · CB1E00480

Code Blue CB1E00480 CB1e BSL BLEm Power Supply

Power supply unit designed to convert standard 120V AC input into the 12-24V DC required by Code Blue paging amplifiers

• Accepts 120V AC input and delivers regulated 12-24V DC for CB1e amplifier systems.
• Direct-fit replacement minimizes downtime during CB1e BSL BLEm paging system maintenance.
• Supports both legacy and current CB1e amplifier configurations from a single supply module.

Code Blue · CB1E00514

Code Blue CB1E00514 GWT BKEm NP 24V Power Supply

24V DC power supply component designed for paging amplifier systems and security audio equipment

• Delivers 24V DC output for reliable power to Code Blue paging amplifier systems.
• Dual-voltage compatibility (12–24V DC) supports upgrades across mixed installations.
• OEM replacement part ensures drop-in fit for existing Code Blue audio infrastructure.

Code Blue · CB1S00811

Code Blue CB1s AED SBL WEm NP 120v Power Supply - CB1S00811

120V AC input power supply designed as a replacement component for Code Blue CB1s AED (automated external defibrillator) systems

• Converts 120V AC mains to stable DC output for uninterrupted CB1s AED operation.
• Compatible with CB1 Series wall-mount and pole-mount tower assemblies.
• Direct replacement component maintaining original CB1s system specifications.

Code Blue · CB2S00094

Code Blue CB2S00094 CRD WEm NP 24V Charger

24V DC charger designed as a replacement part for specific Code Blue paging amplifiers

• Accepts 12–24V DC input, fitting diverse facility power configurations without adapters.
• OEM replacement dock maintains charging continuity in multi-device Code Blue 2S deployments.
• Integrated docking supports both device charging and data sync in a single connection point.

Code Blue · CB4R00078

Code Blue CB4R00078 CB4r SYL BKEM 24V Power Supply

Replacement power supply module for Code Blue CB4r series paging amplifiers and audio equipment

• Direct replacement module restores CB4r paging amplifiers without system redesign.
• Dual-voltage 12–24V DC operation supports varied installation and upgrade scenarios.
• SYL BKEM form factor ensures drop-in compatibility with legacy CB4r series hardware.

Code Blue · CB4R00126

Code Blue CB4R00126 CB4r SBL WEM Power Supply

Replacement power supply component designed for Code Blue security and audio systems

• Runs on standard 120V AC input, simplifying integration into existing panel wiring.
• Purpose-built WEM power module maintains stable power delivery for CB4r series systems.
• Designed for paging amplifier applications in integrated security and audio installations.

Code Blue · CB4S00153

Code Blue CB4S00153 CB4s GWT Remote 24V

Replacement remote control module designed for Code Blue CB4s paging amplifier systems operating on 12-24V DC power

• CB4s GWT remote module at 24V DC for Code Blue paging systems
• 12-24V DC compatible - one supply for DC circuits and security buses
• Direct-fit replacement preserves CB4s chassis and electrical specs

Code Blue · CB4S00227

Code Blue CB4S00227 SBL Window Power Supply 24V

24V DC power supply module designed for paging amplifier systems and security audio equipment

• Delivers stable 24V DC output for Code Blue SBL window-mount paging amplifier systems.
• Accepts 12–24V DC input range, supporting varied facility power infrastructures.
• Direct replacement module minimizes downtime during Code Blue SBL component servicing.

Code Blue · CB4U00192

Code Blue CB4U00192 SBL WEm NP 120VAC Power Supply

120V AC power supply designed to provide stable power for specific Code Blue paging amplifier systems

• Accepts 120VAC input, fitting standard North American electrical infrastructure.
• Delivers 12–24V DC output to power downstream Code Blue audio modules.
• Drop-in replacement for Code Blue paging amplifier systems, minimizing downtime.

Code Blue · CB4U00206

Code Blue CB4U00206 SBL WAs NP 120v Power Supply

120V AC power supply unit designed as a replacement component for Code Blue paging amplifier systems

• 120V AC 50/60 Hz power supply for Code Blue paging amplifiers
• Wall-mount form factor for in-cabinet and head-end placement
• Direct-fit replacement for existing Code Blue paging hardware

Code Blue · CB6S00125

Code Blue CB6S00125 CB6s BSL NG NP 24V Power Supply

24V DC power supply designed to provide stable power for specific Code Blue paging amplifier models

• Delivers 24V DC output for reliable power to Code Blue CB6s paging amplifier units.
• Dual-voltage compatibility (12–24V DC) supports flexible deployment across varied installations.
• Direct replacement part reduces field downtime in access control and emergency notification systems.

Code Blue · CB6S00154

Code Blue CB6S00154 BSL WEM NP 24V Power Module

24V DC power module designed to supply and regulate voltage for Code Blue surveillance and access control equipment

• Delivers regulated 24V DC output purpose-built for Code Blue paging amplifier systems.
• Supports 12–24V DC input range, accommodating varied facility power infrastructure.
• Rated for continuous duty cycle operation, ensuring stable power during sustained use.

Code Blue · CB6S00184

Code Blue CB6S00184 BSL CC Back Emitter 24V

Replacement back emitter module designed for paging amplifier and audio distribution systems operating on 12-24V DC power

• 12–24V DC dual-voltage input eliminates separate SKUs across mixed-voltage installations.
• Drop-in replacement for Code Blue BSL CC amplifier chassis; no chassis swap required.
• Field-swappable module minimizes downtime and labor cost during service events.

Code Blue · CB6S00200

Code Blue CB6S00200 CB6s BSL BLSe NP 24V Power Supply

24V DC power supply module designed for Code Blue security control panels and paging amplifier systems

• Delivers stable 24V DC output to CB6s, BSL, and BLSe control panels.
• Supports paging amplifier and audio systems requiring 12–24V DC input.
• Direct replacement module minimizes downtime during field power supply failures.

Code Blue · CB6S00225

Code Blue CB6S00225 BSL Remote 24V Power Supply

24V DC power supply designed to provide stable power for Code Blue paging amplifiers

• Delivers stable 24V DC output to BSL remote units for consistent paging system uptime.
• Supports 12–24V DC input range, simplifying integration across varied power infrastructures.
• Direct replacement module for Code Blue BSL base station link infrastructure deployments.

Code Blue · CB9S00049

Code Blue CB9S00049 GWT CC 24V Power Supply

24V DC power supply designed for paging amplifiers and audio distribution in security and access control systems

• Delivers regulated 24V DC output for stable paging amplifier and audio circuit operation.
• Supports 12–24V DC range, providing compatibility across Code Blue audio distribution systems.
• Direct replacement component for Code Blue deployments, minimizing field swap-out downtime.

Code Blue · CB9S00138

Code Blue CB9S00138 SBL WAs Power Supply

Replacement power supply unit for Code Blue paging amplifier systems

• Accepts 120V AC input to power Code Blue CB9sd series paging amplifiers.
• Direct replacement unit minimizes downtime in security paging installations.
• Purpose-built for Code Blue audio paging systems in access-control deployments.

Code Blue · CB9T00038

Code Blue CB9T00038 TOR WEm NP 24V Transducer

24V DC audio transducer module engineered for Code Blue paging amplifier systems and emergency notification networks

• Operates across 12–24V DC, supporting both legacy and modern power rails.
• Drop-in OEM replacement for Code Blue amplifier systems; no wiring rework needed.
• Delivers reliable audible output for mass notification and emergency PA coverage.

Code Blue · CBRT00015

Code Blue CBRT00015

Security system component designed for integration with Code Blue professional surveillance and security installations

Code Blue · SLNF0011

Code Blue SLNF0011 CB 1-w Premium Solar PoE Device

Solar PoE injector for off-grid remote surveillance up to 15.4W

• 802.3af PoE powers standard cameras, access points, IoT sensors
• IP68 rated—submersible and sealed against dust and moisture
• Autonomous solar operation eliminates line power dependency in field