Code Blue 41144 PoE Power Splitter Unit
Overview
The Code Blue 41144 is a PoE power splitter that extracts power from an Ethernet line and converts it to DC voltages, eliminating the need to run separate power cabling to remote VoIP speakerphones, handsets, and IP endpoints. This matters in retrofit installations and long-distance deployments where dedicated 12V or 24V runs would add cost and complexity. The 41144 handles multiple conversion modes—PoE to 12VDC, PoE to 24VDC, or simultaneous PoE pass-through with secondary DC output—making it flexible enough to support mixed device ecosystems in a single infrastructure.
Key Features
- PoE Input with Multiple Output Modes: Accepts standard PoE input and converts to 12VDC, 24VDC, or hybrid PoE + DC output. This flexibility means you can power legacy DC-only devices without rewiring or adding power supplies at each endpoint.
- Reduces Auxiliary Cabling: By extracting power from the Ethernet run, the 41144 eliminates the cost and labor of installing separate 12V or 24V power lines to remote speakers, intercoms, or door access equipment. In a 30-device deployment, that's significant savings on conduit, wire, and termination labor.
- IP68 Environmental Rating: Sealed construction rated IP68 means the unit tolerates outdoor mounting, dust ingress, and temporary immersion—valuable for loading dock intercom stations, exterior speaker arrays, or parking area access points where standard electronics would fail.
- Compact Rack Form Factor: 6.14-inch width and 1.77-inch height fit standard 19-inch rack rails (or wall-mount brackets), keeping cable routing and power distribution organized in a central cabinet rather than scattered across site locations.
- Compatible with Common VoIP Handsets and Speakerphones: Works with Code Blue LS1000 and LS2000 VoIP handsets, IP1500 and IP2500 speakerphones, and other standard endpoints that accept 12V or 24V DC. The broad compatibility means you're not locked into a single vendor's ecosystem.
- 1-Year Manufacturer Warranty: Standard warranty covers defects in materials and workmanship, providing baseline protection for a device that will run continuously in an always-on security or intercom infrastructure.
Integration & Compatibility
The 41144 integrates into any network that already carries PoE to remote locations. Because it operates at the physical layer (extracting DC from the Ethernet pair), it is agnostic to VoIP protocols, VMS software, or management platforms. Install it inline between your PoE switch and the endpoint—no configuration, no IP address, no firmware updates required. It simply passes through Ethernet to the device while pulling power. This makes it ideal for integrating older analog intercoms, door readers, or speakerphones into modern PoE-powered networks without replacing the endpoint hardware.
What's in the Box
Package contents are not detailed in the available evidence. Contact the supplier or manufacturer directly for a complete list of included cables, connectors, mounting hardware, and documentation.
Frequently Asked Questions
Q: Does the Code Blue 41144 pass through both power and Ethernet simultaneously?
A: Yes. The 41144 supports modes that extract DC power while maintaining the Ethernet connection to the downstream device, so you can power a VoIP phone or speaker while keeping it on the network.
Q: Can the 41144 be mounted outdoors?
A: Yes. The IP68 rating means the unit is fully sealed against dust and can tolerate temporary submersion, making it suitable for outdoor intercom stations, exterior speaker arrays, and loading dock access points.
Q: What PoE standard does the 41144 require?
A: The source evidence does not specify the input PoE class (802.3af, 802.3at, or 802.3bt). Confirm with the manufacturer that your PoE injector or switch power budget is sufficient for the input requirement.
Q: What voltage options are available on the 41144?
A: The 41144 converts PoE input to 12VDC, 24VDC, or simultaneous PoE + 12VDC or PoE + 24VDC output, depending on the model variant ordered.
Q: Will the 41144 work with my existing LS2000 VoIP handset?
A: Yes. Code Blue documents compatibility with the LS2000 VoIP Handset, along with LS1000, IP1500, and IP2500 devices. If you have a different endpoint, consult the device datasheet to confirm DC voltage compatibility.
Q: What warranty does the 41144 carry?
A: The 41144 includes a 1-year manufacturer warranty covering defects in materials and workmanship.
The Code Blue 41144 solves a real infrastructure problem: when you've already run PoE cabling to a remote location—a loading dock, parking area, or exterior wall—but your endpoint (a speakerphone, door reader, or intercom) only accepts 12V or 24V DC. Instead of pulling a second power line, the 41144 extracts that DC from the same Ethernet run. In a 50-device campus deployment, eliminating auxiliary power distribution saves weeks of labor and thousands in conduit and wire.
Technical Highlights:
- Multi-Mode DC Conversion: The 41144 supports PoE-to-12VDC, PoE-to-24VDC, and PoE pass-through with secondary DC output. This flexibility means you can mix legacy DC-only hardware (old analog intercoms, older door strikes) with modern PoE devices on the same infrastructure without redesign.
- IP68 Outdoor Seal: Full IP68 rating means dust, salt spray, and temporary water immersion won't compromise the unit. If your intercom station sits exposed on a dock or your speaker array handles outdoor weather, the 41144 won't fail where standard electronics would corrode.
- Compact Rack Profile (6.14" × 1.77"): Fits cleanly in a 19-inch cabinet with other network gear, centralizing power extraction and cable management rather than scattering splitters across the site. In a dense deployment, that's the difference between a cable closet and a cable nightmare.
Deployment Considerations:
- The input PoE class (802.3af, 802.3at, or 802.3bt) is not specified in the evidence. Verify with your PoE switch or injector that it can source the power your DC load requires—a high-current door strike or amplified speaker may exceed standard PoE power budgets.
- The 41144 is a passive power splitter with no onboard regulation or buffering. If your PoE source drops or flickers, the downstream DC output will too—not ideal for critical access control. In mission-critical installations, pair it with a UPS on the PoE line or use a managed injector with battery backup.
Deploy the 41144 when you have solid PoE infrastructure already in place and want to integrate one or two older DC-powered devices without running new power lines. It's particularly valuable in retrofit security integrations where adding copper to every remote location isn't feasible.
