Pelco

Pelco

SKU: 180-FE-WG-MT

Pelco 180-FE-WG-MT Wedge Wall Mount for 180° Fisheye Cameras

Wedge wall mount angles 180° fisheye down to capture floor-level hallway traffic

• Fixed calibrated tilt redirects full panoramic view across floor and lower walls
• IP66 sealed construction resists rain spray and dust in semi-outdoor environments
• Engineered for Pelco 180-degree fisheye systems in corridors, entrances, and doorways

Pelco

SKU: PA402-SW

Pelco PA402-SW Pole Mount Adapter for Spectra Legacy PTZ

Pole mount adapter converts Spectra wall mounts to 1.5–4" poles

• Band clamp interface secures firmly to cylindrical poles without drilling
• Maintains pan/tilt axis alignment during active camera rotation
• Compatible with Pelco Spectra Series and legacy PTZ wall mount variants

Pelco

SKU: PD-9001GR/AT/AC-NA-MSI

Pelco PD-9001GR/AT/AC-NA-MSI PoE+ Midspan Injector 30W

Single-port PoE+ injector adds 30W power to non-PoE switches

• IEEE 802.3at PoE+ up to 30W for isolated camera additions
• Gigabit Ethernet connection with North American AC cord included
• Compact midspan design for rapid deployment without switch replacement

Pelco

SKU: RC-PMA-W

Pelco RC-PMA-W Pole Mount Adapter White

Pole mount adapter for Pelco Oculus and Aeron multi-sensor cameras

• Converts standard camera base to secure pole-mount configuration
• White finish matches Oculus and Aeron camera bodies
• Clamping mechanism supports elevated positioning in open areas

Pelco

SKU: PA101

Pelco PA101 Pole Mount Adapter for PM14

PM14 pole mount adapter for cylindrical outdoor installations

• Converts PM14 wall mount to pole configuration without additional brackets
• Supports standard 1.5"–2.5" diameter poles in outdoor parking and perimeter
• Engineered for lateral wind loads and vibration on pole-mounted systems

Pelco

SKU: KF-MAGMOUNT2

Pelco KF-MAGMOUNT2 Klick Fast Magnetic Mount

Tool-free magnetic mount for Pelco Klick Fast cameras on steel

• Snap-on attachment to ferrous metal surfaces without fasteners or tools
• Quick reposition and remove for temporary surveillance and event deployments
• Compatible with Pelco camera systems using Klick Fast interface standard

Pelco

SKU: WMVE-SW

Pelco WMVE-SW Dome Wall Mount 0.75-1.5in NPT White

Wall mount for Pelco dome cameras, 0.75–1.5" NPT conduit

• Internal cable routing keeps wiring hidden for clean ceiling installations
• 0.75–1.5" NPT conduit range fits standard building infrastructure
• White finish matches drop-ceiling environments, NDAA Section 889 compliant

Pelco

SKU: SRXV-WMS

Pelco SRXV-WMS Wall Mount for Sarix Value Dome

Wall mount for Pelco Sarix Value dome cameras with IK09 vandal rating

• Supports multiple Sarix Value camera series in single mount bracket
• Wall and corner deployment options for flexible installation geometry
• IK09 impact resistance rated for commercial and industrial environments

Pelco

SKU: IWM-SW RB

Pelco IWM-SW RB Wall Mount for Sarix IE Pendant

OEM wall mount for Sarix IE large pendant cameras, light gray finish

• Surface-mount installation when ceiling mounting isn't an option
• Genuine Pelco replacement part for Sarix IE pendant bodies
• Factory-tested reboxed stock, 1-year manufacturer coverage

Pelco

SKU: SRXP4-PM-1E

Pelco SRXP4-PM-1E Pendant Mount for Sarix Pro 4 Dome

Pendant mount for Sarix Pro 4 dome cameras on conduit or pipe

• Engineered fit eliminates shimming and micro-vibration for sharp images
• Integrated cable routing through arm protects wiring from damage and snagging
• Accepts standard 1/2" or 3/4" conduit drops and rigid pendant pipe

Pelco

SKU: SLSPCIL-1001

Pelco SLSPCIL-1001 In-Ceiling Mount Sarix Pro 4

Recessed ceiling mount for Sarix Pro 4 domes with flush profile

• In-ceiling recessed design sits flush with ceiling plane for minimal visual profile
• OEM-engineered specifically for Sarix Pro 4 dome geometry and retention hardware
• Integrated plenum cable routing keeps power and network cabling out of sight

Pelco

SKU: WBJA

Pelco WBJA Wall Bracket Ball Joint NDAA Compliant

Wall bracket with ball joint for Pelco housings, NDAA compliant

• Multi-axis ball joint positioning for precise field-of-view alignment
• Mounts to masonry, structural steel, and solid wood framing
• NDAA Section 889 compliant for government and regulated deployments

Pelco

SKU: WBMA

Pelco WBMA Wall Bracket Ball Joint NDAA Compliant

Wall-mount bracket with ball joint for multi-axis Pelco camera aim

• Integrated ball joint allows precise aim adjustment without repositioning housing
• NDAA Section 889 compliant for government and regulated procurement environments
• Lockable joint secures camera position after installation and initial settling period

Pelco

SKU: KF-DOCKEP

Pelco KF-DOCKEP NDAA Compliant Klick Fast Epaulette Dock

• IP67-rated housing stays dust-tight and survives 1-meter submersion in field ops.
• Klick Fast system enables rapid secure attach/detach without tools during deployment.
• NDAA-compliant design meets U.S. defense and critical infrastructure procurement rules.

Pelco

SKU: OHEP90INJO1

Pelco OHEP90INJO1 Power Injector PoE 90W

• Delivers 90W PoE++ (802.3bt) to power PTZ cameras, IR illuminators, and encoders.
• IP66-rated enclosure handles rain, dust, and washdown—no added weatherproof housing needed.
• Single Ethernet run carries power and data, cutting conduit and eliminating separate AC runs.

Pelco

SKU: SRXE4-2V12-IMD-1

Pelco SRXE4-2V12-IMD-1 2MP Sarix Dome Camera

• 2MP WDR sensor handles backlit and mixed-light scenes without extra lighting hardware.
• 2.8–12mm varifocal lens covers wide perimeter to facial detail on a single SKU.
• IP67/IP68 + IK11 rated; deploys on wall, ceiling, pole, pendant, corner, or recessed mount.

Pelco

SKU: KF-HARN3

Pelco KF-HARN3 NDAA Compliant Klick Fast 3-Point Chest Harness

• IP67-rated harness withstands rain, sweat, and submersion on outdoor deployments.
• Klick Fast quick-release enables tool-free camera swap in under 2 seconds.
• NDAA Section 889 compliant — qualifies for federal and state government procurement.

Pelco

SKU: S7820L-PW

Pelco S7820L-PW NDAA 4K 20X IR Dome Camera

• IP66/IP67 and IK10 ratings support outdoor and vandal-prone deployments.
• 30X optical zoom (4–9 mm varifocal) covers both wide perimeter and close detail.
• H.265/H.264/MJPEG compression with PoE++ (802.3bt) simplifies single-cable installs.

Pelco

SKU: ESCE1-2X40Q6-RLU

Pelco ESCE1-2X40Q6-RLU D-PTZ 40x Thermal Camera

• Dual thermal+visible 2MP sensors in one PTZ cut camera count and cabling on perimeters.
• 40x optical zoom (4.25–170 mm) covers large sites with zero digital-zoom degradation.
• IP66/IP67, IK10, and MIL-STD-167-1A ratings confirm readiness for industrial deployments.

Pelco

SKU: JPTX-EVO2-300-W

Pelco JPTX-EVO2-300-W Jaegar Ranger EVO2 Thermal PTZ

300mm thermal PTZ for long-range detection without cooler maintenance

• 300mm telephoto lens with uncooled VOx sensor for extended detection range
• Continuous 360° pan and variable-speed tilt with programmable patrol presets
• H.265/H.264 compression, -40°C to +60°C operation, ONVIF Profile S/T/G/M