Pelco

Pelco

SKU: SRXP4-2V10-IMD

Pelco SRXP4-2V10-IMD 2MP Indoor Dome Camera

2MP indoor dome with motorized 3.4–10.5mm lens and 126dB WDR

• Motorized varifocal lens with autofocus; 101° to 31° view range
• Extreme low-light: 0.01 lux color / 0.005 lux monochrome at 33ms
• H.264/H.265 multi-stream with Smart Compression; PoE Class 3 + microSD

Pelco

SKU: EPP2

Pelco EPP2 NDAA Compliant ESPRIT Pedestal Plate

• NDAA-compliant construction supports federal and government-sensitive deployments.
• Mounts any ESPRIT-series pan-tilt head directly to pedestal bases—no intermediate adapters.
• Includes three 10-32 × 1/2-in. Phillips flathead screws; no additional hardware sourcing needed.

Pelco

SKU: PLMT-1001

Pelco PLMT-1001 NDAA Compliant Pole Mount

• NDAA compliant design clears federal and sensitive-facility deployment requirements.
• Five mount orientations—wall, ceiling, pole, pendant, corner—maximize placement flexibility.
• 5-year manufacturer warranty reduces long-term maintenance risk on installed hardware.

Pelco

SKU: PP350-SW

Pelco PP350-SW NDAA Compliant Wall Mount Adapter

• IP67 and IK10 ratings ensure reliable operation in outdoor and high-impact environments.
• Supports wall, ceiling, pendant, and rack mounting for flexible deployment configurations.
• PoE++ (802.3bt) compatibility simplifies cabling by delivering power over a single RJ-45 run.

Pelco

SKU: EXC2602-62-A4

Pelco EXC2602-62-A4 6MP Explosion-Proof Camera 4m Cable

6MP explosion-proof camera with 4m cable for ATEX Zone 1/21 hazardous areas

• 6MP resolution at 30 fps with 4.9–8mm motorized varifocal lens and IR night vision
• 316L stainless steel housing rated IP69/IP68; operates -40°C to +60°C in extreme conditions
• PoE Class 3 power via factory-terminated cable; H.265 compression and ONVIF compliance

Pelco

SKU: FMCI-PG1M

Pelco FMCI-PG1M Gigabit SFP Fiber Media Converter

Gigabit SFP fiber-to-copper converter for Pelco IP cameras, no config

• 1000 Mbps throughput over fiber with standard SFP transceiver (sold separately)
• Layer 1 transparent bridging — plug in and operate, zero management interface
• Mini DIN rail enclosure with RJ45 copper port for direct camera connection

Pelco

SKU: FMCI-AF1SM1STM

Pelco FMCI-AF1SM1STM Fiber Media Converter

Single-mode fiber media converter, 100 Mbps, mini form factor

• 100 Mbps Fast Ethernet over single-mode fiber with ST connectors
• Compact mini enclosure fits tight camera-end and headend spaces
• A-side unit pairs with B-side converter for bidirectional single-fiber link

Pelco

SKU: MPXWBA

Pelco MPXWBA MPX Series Wall Mount Bracket

Direct-wall bracket for Pelco MPX housings with integrated cable routing

• IP66-rated steel construction handles concrete, masonry, and steel surfaces
• Built-in cable management routes power and data through bracket arm
• NDAA Section 889 compliant for government and critical infrastructure use

Pelco

SKU: PP450-SW

Pelco PP450-SW Parapet Mount Spectra DF5 White

Parapet-edge swivel mount for Pelco Spectra and DF5 pendant domes

• Adjustable swivel mechanism for precise camera angle positioning post-install
• White finish designed for rooftop, balcony, and perimeter wall deployment
• Compatible with Pelco Spectra and DF5 series pendant dome cameras

Pelco

SKU: FMCI-AF1MM1STM

Pelco FMCI-AF1MM1STM Mini Fiber Media Converter

100 Mbps fiber media converter for camera systems beyond 100m copper limits

• Single-mode multimode ST connector extends Ethernet over fiber without signal loss
• 100 Mbps throughput supports 4–6 simultaneous 1080p camera streams per fiber pair
• Mini form factor (DIN rail/1U) fits compact installations; pairs with FMCI-BF1MM1STM unit

Pelco

SKU: POE90U-1BT

Pelco POE90U-1BT 90W PoE++ Injector

90W PoE++ injector for high-power surveillance gear on Cat5e/Cat6

• 90W IEEE 802.3bt output powers PTZ cameras, multi-sensors, and thermal units
• Single-port design eliminates cable clutter and simplifies dense installations
• Backward compatible with 802.3af/at devices; auto-negotiates power levels

Pelco

SKU: PP450-SW B2

Pelco PP450-SW B2 Parapet Adapter Mount White

Parapet adapter mount for Pelco Spectra and DF5 pendant domes

• 1.5-inch NPT threading fits standard pendant pipe installations
• Powder-coated steel white finish withstands outdoor IP66 conditions
• B-stock unit—functionally identical to new, NDAA Section 889 compliant

Pelco

SKU: WCS1-4

Pelco WCS1-4 Single-Output Camera Power Supply 4A

Regulated 4A DC supply for non-PoE camera installations

• Selectable 24, 26, or 28 VAC output with stable regulation
• Wall, pole, or rack mount for flexible indoor/outdoor deployment
• 4A capacity handles single camera or compatible accessory power

Pelco

SKU: IMD1-PMT

Pelco IMD1-PMT Outdoor Pendant Mount Adapter

Pendant mount adapter for Sarix Multi IMD1 cameras in outdoor installations

• Mounts IMD1 cameras to WLMT-1001 or NPTA-1001 pendant arms overhead
• Outdoor-rated construction handles temperature swings and corrosion
• IK10 vandal rating with vibration-resistant threaded connection

Pelco

SKU: IMD1-SMT

Pelco IMD1-SMT Surface Mount Adapter for Sarix Multi

Direct surface mount adapter for Pelco Sarix Multi IMD1 domes

• Mounts flat to walls or ceilings without pendant arms or recessed housing
• PoE++ passthrough powers IMD1 camera with full Ethernet and USB connectivity
• NDAA Section 889 compliant for U.S. government and federal procurement

Pelco

SKU: IMD1-INC

Pelco IMD1-INC In-Ceiling Mount for Sarix Multi

Flush in-ceiling mount for Sarix Multi IMD1 dome cameras

• Recessed mounting integrates into drop ceilings with optional CLPNL panels
• Mechanical interface locks camera body without power or electronic binding
• Purpose-built for IMD1 form factor only—confirm camera compatibility first

Pelco

SKU: PM2010

Pelco PM2010 10-Inch Pedestal Mount

10-inch pedestal mount for Pelco cameras on desks and counters

• 10-inch height positions cameras at eye level for facial recognition
• Stable weighted base resists tipping in high-traffic retail and office areas
• Compatible with standard Pelco camera mounting interfaces across product line

Pelco

SKU: IMD1-SPLD0 RB

Pelco IMD1-SPLD0 RB Smoked Dome Replacement

Smoked dome replacement for Pelco Sarix Multi with IR pass-through

• IK09 impact-rated smoked polycarbonate obscures lens direction
• Maintains IR transmission for 24/7 night vision operation
• Genuine OEM part for Sarix Multi surface and pendant mounts

Pelco

SKU: IWM-GY

Pelco IWM-GY Wall Mount Dome Gray

Indoor wall mount bracket for Pelco dome cameras, gray finish

• Direct flush mount to walls—no adapter plate needed, cuts install labor
• Modular design accepts PA402 pole and CM400 corner adapters on-site
• IK10 vandal rating and NDAA Section 889 compliant for government use

Pelco

SKU: IWM-SW

Pelco IWM-SW Wall Mount Dome White

Indoor white wall mount for Pelco dome cameras, accepts pole/corner adapters

• Surface wall mount with modular PA402 pole and CM400 corner adapter support
• White finish blends into office and retail interiors without visual clutter
• NDAA Section 889 compliant for government and federal procurement projects