Panduit F92ERB1LNSNM004 OS2 Single-Mode Fiber Patch Cord

The Panduit F92ERB1LNSNM004 Opti-Core fiber patch cord bridges angle-polished field terminations to standard duplex network equipment in surveillance, datacenter, and enterprise installations. This 4-meter OS2 single-mode jumper delivers LC/APC connectivity on one end—matching low-reflection field-installed connectors—and duplex LC on the other for switches, media converters, and IP camera PoE injectors. OFNR vertical-conductor rating qualifies it for riser pathways between floors without plenum-grade expense, while 1.6mm tight-buffered construction and yellow PVC jacket provide durability and instant single-mode identification in crowded rack environments.

Key Features

• OS2 9/125µm single-mode fiber supports multi-kilometer transmission for campus backbone and long-distance IP camera links
• LC/APC angled physical contact connector on one end reduces back reflection below -60 dB, protecting sensitive transceivers and maintaining low bit-error rates
• Duplex LC connector on opposite end matches standard SFP/SFP+ modules in network switches, NVRs with fiber uplink ports, and media converters
• OFNR (Optical Fiber Nonconductive Riser) flammability rating per NFPA 70 and EN 60332-1-2 permits vertical installation in non-plenum shafts and conduit risers
• Standard polarity (Type A / straight-through) aligns transmit-to-receive fiber pairs without field reversal or polarity modules
• 1.6mm tight-buffered cable construction resists kinking and provides pull strength for patch panel dressing and cable management arms
• Yellow PVC jacket conforms to TIA-598-C color code for instant single-mode fiber identification, preventing mode mismatch with multimode infrastructure
• 4-meter (13.12 ft) length accommodates typical top-of-rack to adjacent rack spans, patch panel to switch distances, or equipment-room cross-connects

Single-mode OS2 fiber operates at 9µm core diameter, enabling transmission over tens of kilometers at data rates from 1 Gbps to 100 Gbps with appropriate transceivers. In IP surveillance deployments, this distance capability supports campus-wide fiber backbones linking remote buildings to centralized NVR farms, or parking-structure camera pods to main-building network closets. The LC/APC connector uses an 8-degree angled endface polish to redirect Fresnel reflection away from the fiber core, critical when interfacing with DWDM (Dense Wavelength Division Multiplexing) systems, high-sensitivity coherent optics, or analog video-over-fiber converters that cannot tolerate reflected signal interference. Duplex LC termination on the opposing end accepts standard duplex clips and fits SFP cages in Cisco, Juniper, HPE Aruba, and Ubiquiti switches without adapter modules. Standard polarity maintains position A (transmit) on fiber 1 and position B (receive) on fiber 2 at both ends, matching the straight-through pinout expected by auto-negotiating transceivers and eliminating the polarity-flip troubleshooting common with non-standard assemblies.

OFNR flame rating qualifies the cable for vertical pathways—floor-to-floor risers, elevator shafts (non-plenum), and cable trays in stairwells—where NEC Article 770 prohibits general-purpose (OFN) fiber but does not mandate plenum (OFNP) expense. This makes the F92ERB1LNSNM004 the cost-effective choice for multi-story office buildings, hospitals, universities, and industrial facilities running fiber between equipment rooms on different floors. The 1.6mm tight-buffered design uses a thick polymer coating around each 250µm buffered fiber, providing mechanical protection during installation pulls and preventing microbending loss when the cable is dressed into tight radius bend limiters or Velcro-strapped to rack verticals. Four-meter length suits inter-rack connections in datacenters (crossing hot or cold aisles), patch panel to switch runs in telecommunications rooms, and equipment-room fiber distribution from wall-mounted housings to free-standing relay racks. Yellow jacketing instantly distinguishes this single-mode jumper from aqua OM3/OM4 multimode cables during moves-adds-changes, reducing the risk of plugging 850nm multimode transceivers into 1310nm single-mode fiber—a mode mismatch that causes link failure and wastes troubleshooting time.

Factory-terminated Panduit Opti-Core patch cords ship with insertion loss tested and documented per IEC 61300-3-4, ensuring each connector meets the ≤0.3 dB maximum IL specification required for reliable 40GBASE-LR4 and 100GBASE-LR4 links across standards-compliant structured cabling. EN 60332-1-2 flame certification provides European CE mark compliance for multinational enterprises and foreign military sales projects requiring EU directives. Integrators installing Axis, Hanwha, or Bosch IP cameras with fiber SFP uplink modules, deploying Genetec or Milestone NVR appliances with 10G fiber storage networks, or provisioning access control panels with fiber-optic door controller links will find this jumper meets TIA-568.3-D single-mode channel requirements when combined with field-terminated LC/APC cabling—delivering predictable optical power budgets, minimal connector cleaning cycles, and consistent performance across temperature cycling in equipment rooms and IDF closets.