Panduit F92ELB1LNSNM007 OS2 LC/APC to LC Fiber Patch Cord

Panduit F92ELB1LNSNM007 Opti-Core™ OS2 LC/APC to LC Fiber Patch Cord

The Panduit F92ELB1LNSNM007 is a 7-meter duplex fiber optic patch cord engineered for low-loss, long-distance single-mode connectivity in enterprise networks, datacenters, and fiber distribution systems. Part of Panduit's Opti-Core™ line, this OS2-rated cable features LC/APC connectors on one end and standard LC connectors on the other, delivering the hybrid connectivity required for applications where ultra-low back reflection on one side must interface with legacy LC infrastructure on the other. The 1.6mm cable diameter supports high-density patching in confined rack environments, while the LSZH jacket meets building safety codes for plenum and riser installations without sacrificing mechanical durability.

Key Features

• OS2 single-mode fiber rated for 10G/40G/100G transmission over distances up to 10 km and beyond
• LC/APC (angled physical contact) green connector on one end for <−60 dB return loss, ideal for high-speed digital and analog CATV distribution
• Standard LC duplex connector on opposite end for compatibility with existing LC infrastructure
• 1.6mm cable diameter enables high port-count patching in 1U fiber enclosures and breakout panels
• LSZH (Low Smoke Zero Halogen) jacket compliant with IEC 60332-1 and IEC 61034 for safe installation in occupied spaces
• Yellow outer jacket follows TIA-598-C color coding for instant OS2 single-mode identification
• 2-fiber duplex configuration supports bidirectional data transmission in a single cable assembly
• 7-meter (23 ft) length suited for rack-to-rack patching, floor distribution box connections, and cross-aisle links

Single-mode OS2 fiber provides 9/125 micron core/cladding geometry optimized for laser-based transceivers operating at 1310 nm and 1550 nm wavelengths. The angled physical contact (APC) polish on the LC connector at one end reduces Fresnel reflection to below −60 dB, a critical specification for coherent optics, passive optical networks (PON), and RF-over-fiber systems where back reflection degrades signal integrity. The opposing LC connector uses standard physical contact (PC) polish, allowing direct connection to legacy switch ports, media converters, and SFP/SFP+ modules that do not require APC termination. This hybrid configuration eliminates the need for APC-to-PC adapter modules in mixed environments, reducing insertion loss and simplifying patching workflows. Panduit's factory-terminated connectors are tested to meet or exceed TIA-568.3-D insertion loss limits (≤0.75 dB typical), ensuring consistent optical performance across the entire cable plant.

The 1.6mm reduced-diameter cable construction is purpose-built for high-density fiber deployments where airflow, cable management, and port accessibility are constrained. In 1U fiber enclosures housing 144-fiber MPO breakout modules, the smaller bend radius and reduced bulk of 1.6mm assemblies prevent congestion that forces technicians to over-bend 2.0mm or 3.0mm trunk cables during moves, adds, and changes. The LSZH jacket formulation releases minimal smoke and no corrosive halogen gases during combustion, meeting NEC Article 770 plenum (OFNP) equivalency when installed in air-handling spaces. For datacenter operators managing thousands of fiber links under raised floors or overhead cable trays, LSZH compliance reduces life-safety risks without requiring metallic conduit or costly fire-stop retrofits. The yellow jacket color instantly distinguishes single-mode OS2 links from aqua OM3/OM4 multimode assemblies during troubleshooting and audit activities, reducing the risk of patching errors that can damage transceivers or misdirect traffic flows.

Panduit Opti-Core™ patch cords ship with individual dust caps on both connectors and are tested to 500 mating cycles per IEC 61754-20, ensuring reliable field performance across multiple reconfigurations. This 7-meter length is commonly deployed for connections between adjacent server racks, distribution frame to equipment rack links, or patch panel to SAN switch uplinks in enterprise datacenters. The LC/APC to LC configuration is particularly relevant in hybrid environments where new 40GBASE-LR4 or 100GBASE-LR4 optics (requiring APC for coherent modulation) must backhaul through existing LC-based aggregation switches. Installers gain a field-proven, factory-terminated solution that eliminates on-site polishing, fusion splicing, or connector cleaning steps while maintaining insertion loss budgets for 10 km+ single-mode links.