Lifesafety Power

Lifesafety Power · RGM75B-D8PZ

Lifesafety Power RGM75B-D8PZ 4 Door 75W

75W integrated Mercury drawer designed for multi-door access control installations where centralized power distribution and relay control are required

• Consolidates four-door relay control into one 75W enclosure, reducing board sprawl.
• Mercury protocol integration eliminates distributed relay boards across your facility.
• Rack-mounts in standard 19-inch four-post or wallmount bracket; supports 12/24VDC.

Lifesafety Power · RGM75B-C8PZ/T4-A

Lifesafety Power RGM75B-C8PZ/T4-A 75W Power Supply

75W, dual-output rackmount power supply designed for security integrations requiring redundant voltage rails and multiple access control relay outputs

• Dual primary output (6A/12V or 3A/24V) supports both lock voltage standards from one unit.
• Eight relay lock control outputs with per-output failsafe/failsecure selection, no external relay modules needed.
• Adjustable 5–18V secondary rail at 4A powers auxiliary readers and sensors on an independent circuit.

Lifesafety Power · RGM75B-C8PZ

Lifesafety Power RGM75B-C8PZ RGM75B-C8PZ

75W redundant power supply designed for surveillance installations requiring uninterrupted DC distribution across multiple cameras and ancillary

Lifesafety Power · RGM75B-C8D8PZ

Lifesafety Power RGM75B-C8D8PZ 75W Dual Voltage

75W power supply for access control and emergency egress systems

• Delivers 75W at 6A/12V or 3A/24V to centralize power for multi-lock deployments.
• Eight relay outputs fused at 3A each with FAI/failsafe/failsecure selection per output.
• Eight class 2 DC aux outputs at 2.5A each, Bus1/Bus2 selectable for zoned distribution.

Lifesafety Power · RGM75B-C4PZ/E

Lifesafety Power RGM75B-C4PZ/E Gemini Rack Mount

75W rack-mount power supply designed for access control systems requiring redundant battery backup and failsafe/failsecure lock control

• Dual 12V/24V outputs programmable per zone eliminate separate supplies in mixed-lock deployments.
• Four 2.5A Class 2 relay outputs support independent failsafe or failsecure lock configs per zone.
• Form C fault contacts supervise low battery, ground fault, PSU failure, and blown fuse conditions.

Lifesafety Power · RGM75B-C4PZ

Lifesafety Power RGM75B-C4PZ Gemini Rack Mount

Dual-voltage rack-mount power supply engineered for access control and fire alarm systems

• Delivers 75W total output with four 2.5A Class 2 relay lock outputs for multi-zone access control.
• Built-in fire alarm disconnect auto-unlocks doors on alarm, meeting life-safety code requirements.
• Fits standard 19-inch racks at 3.5H × 19.0W × 20.5D inches with 12V/24V selectable by zone.

Lifesafety Power · RGM75B-C4PD8PZ

Lifesafety Power RGM75B-C4PD8PZ RGM75B-C4PD8PZ

75W rackmount power supply engineered for small-to-medium access control systems that share infrastructure with network and security equipment in a

• 75W continuous output powers four solenoid locks or EM devices simultaneously.
• Four independent form-C relay outputs isolate control signaling per door.
• Configurable 12/24VDC output at install reduces SKU count across mixed lock types.

Lifesafety Power · RGM75B-C4D8PZ

Lifesafety Power RGM75B-C4D8PZ 75W Power Supply

75W rackmount power supply designed for access control and security system installations

• Selectable 6A/12V or 3A/24V output covers both common lock and reader voltages.
• Four relay outputs, each fused at 3A and configurable for FAI, failsafe, or failsecure.
• Eight class-2 DC auxiliary outputs at 2.5A each support high peripheral counts per rack unit.

Lifesafety Power · RGM75B-C42D8PZ-WT-AMZ01/E

Lifesafety Power RGM75B-C42D8PZ-WT-AMZ01/E 75W

2U rackmount power distribution system designed for mid-scale access control, intrusion detection, and security infrastructure deployments

• 220VAC input with 12V/24V selectable output eliminates separate racks for mixed devices.
• Four relay outputs, each fused at 3A, support independent failsafe or failsecure door logic.
• Sixteen Class 2 auxiliary outputs at 2.5A each power readers, sensors, and keypads per bus.

Lifesafety Power · RGM150-D8PZ

Lifesafety Power RGM150-D8PZ 4 Door 150W

150W single-voltage rackmount power supply engineered for access control and door-strike distribution in 19-inch rack environments

• Consolidates power for 4 door-lock circuits into a single 19-inch rack chassis.
• 8 independently fused Class 2 outputs protect readers and sensors from short circuits.
• Field-selectable 12V or 24V DC at shipment reduces commissioning errors on site.

Lifesafety Power · RGM150-C8PZ

Lifesafety Power RGM150-C8PZ 150W Power Supply

150W power supply designed for access control and life safety systems requiring redundant, centralized power distribution

• Delivers 150W at 12A/12V or 6A/24V to support mixed lock hardware from one supply.
• Eight 2.5A relay outputs support FAI, failsafe, or failsecure modes per door independently.
• 2U 19-inch rackmount form factor with Z-bracket arm simplifies cable routing in rack deployments.

Lifesafety Power · RGM150-C4D8PZ

Lifesafety Power RGM150-C4D8PZ Rack Mount 150V

Single-voltage 150W rack-mount power distribution unit designed to supply multiple surveillance and access control devices from a centralized

• 150W rack-mount PDU centralizes AC power for multi-device surveillance and access control.
• 12 segregated outputs (4 lock + 8 auxiliary) enable independent fusing of critical loads.
• Standard 19-inch form factor integrates directly into existing rack enclosures via 120VAC input.

Lifesafety Power · RGM150B-M8PNZ/T4-A

Lifesafety Power RGM150B-M8PNZ/T4-A Rack Mount Power

UL-listed 150W rack-mount power distribution system designed to consolidate access control power, battery backup, and safety functions in a single

• Eight individually selectable 12V/24VDC Class 2 outputs eliminate separate supplies for mixed lock/reader installs.
• Integrated fire alarm disconnect automatically de-energizes locks on alarm signal to meet life-safety code.
• UL-listed 3RU chassis with AC fault and system fault Form C contacts enables direct tie-in to monitoring panels.

Lifesafety Power · RGM150B-D8PZ

Lifesafety Power RGM150B-D8PZ 4 Door 150W Mercury Dual Voltage

150W integrated Mercury rackmount controller purpose-built for access control installations requiring four-door management in a single 19-inch

• Manages four doors from a single 150W rackmount unit, reducing panel sprawl.
• Dual-voltage support covers 12V legacy and networked Mercury deployments without hardware swap.
• Standard 19-inch EIA four-post form factor fits directly into existing server room racks.

Lifesafety Power · RGM150B-C8PZ

Lifesafety Power RGM150B-C8PZ 150W Rack

150W integrated Mercury rackmount power supply designed to consolidate access control door power distribution into a single four-post rack location

• 150W output powers up to four 12V or 24V door locks simultaneously from one rack unit.
• Field-selectable single or dual voltage eliminates the need for multiple PSU models on site.
• UL/CUL/CE certified for compliant deployment across North American and European installations.

Lifesafety Power · RGM150B-C8PD8PZ

Lifesafety Power RGM150B-C8PD8PZ 4 Door 150W

150W integrated power supply engineered for 4-door access control and intrusion systems in commercial buildings, office parks, and enterprise campuses

• 150W output powers four independent door circuits simultaneously from a single unit.
• Dual 12VDC/24VDC rails support legacy and modern locks on the same supply.
• Integrated battery charger eliminates external hardware for UPS-backed egress doors.

Lifesafety Power · RGM150B-3D8PZ

Lifesafety Power RGM150B-3D8PZ 4-Door 150W

150W integrated power supply designed for multi-door access control and surveillance installations requiring centralized power distribution from a

• 150W output across four independently fused circuits prevents one fault from killing the entire installation.
• Native 12VDC/24VDC dual-voltage support lets you mix legacy and modern control panels on a single unit.
• 19-inch rackmount form factor centralizes power for locks, readers, and cameras in one rack position.

Lifesafety Power · RGL-XZ

Lifesafety Power RGL-XZ RGL Drawer and Backplate

Drawer and backplate assembly for the RGL cash drawer system

• Heavy-duty steel construction ensures secure, long-term mounting in POS and access-control installs.
• Supports both manual and printer-triggered drawer operation for flexible deployment configurations.
• Designed specifically for RGL series hardware, simplifying integration and reducing compatibility risk.

Lifesafety Power · RGL75-D8Z

Lifesafety Power RGL75-D8Z 75W power supply 6A/12V or 3A/24V 8

75W, 2U rack-mount power supply designed to distribute regulated DC power across eight independently fused auxiliary outputs

• Eight independently fused 3A outputs centralize DC power for readers, locks, and sensors.
• Field-selectable Bus1/Bus2 per channel supports 6A/12V or 3A/24V without rewiring.
• 2U, 19-inch rack-mount form factor with Z-bracket arm keeps field wiring organized.

Lifesafety Power · RGL250-2M8PZ1-ORC03

Lifesafety Power RGL250-2M8PZ1-ORC03 Gemini

N equipment rack designed for centralized power distribution and system integration in commercial and enterprise security installations

• Centralizes access control and door hardware power into one managed enclosure.
• Dual power inputs with automatic failover eliminate single points of failure.
• DIN rail support simplifies component swaps and incremental capacity expansion.