Lifesafety Power RGM75B-C8D8PZ 75W Power Supply

The Lifesafety Power RGM75B-C8D8PZ is a 75W power supply for access control and emergency egress systems. It delivers 6A at 12V or 3A at 24V output with adjustable 5–18V secondary at 4A maximum. The unit houses 8 relay lock control outputs (fused at 3A each, selectable for FAI/failsafe/failsecure) and 8 DC auxiliary outputs (class 2 power limited at 2.5A each, selectable for Bus1 or Bus2). Designed for integrators deploying multi-door access control systems requiring centralized power and relay switching.

Key Features

75W total capacity: 6A/12V or 3A/24V primary output

Adjustable 5–18V secondary voltage at 4A maximum

8 relay lock control outputs, fused at 3A per output, FAI/failsafe/failsecure selectable

8 DC auxiliary outputs, class 2 power limited at 2.5A per output, Bus1/Bus2 selectable

2U rackmount enclosure (19.0″W × 3.5″H × 20.5″D) with Z-bracket wire management articulating arm

Installers and system integrators deploying multi-lock access control installations rely on the RGM75B-C8D8PZ for centralized power distribution and relay control across door strikes, mag locks, and emergency egress devices.

Lifesafety Power RGM75B-C4D8PZ 75W power supply 6A/12V or 3A/24V

Selectable 6A/12V or 3A/24V output covers both common lock and reader voltages.
Four relay outputs, each fused at 3A and configurable for FAI, failsafe, or failsecure.
Eight class-2 DC auxiliary outputs at 2.5A each support high peripheral counts per rack unit.

$1,448.00 $1,009.99 Save $438.01

Add to Cart

The item has been added

Free shipping over $499

$1,448.00 $1,009.99 Save $438.01

Add to cart Add to quote Compare

Lifesafety Power

SKU: RGM75B-C8PZ/T4-A

Lifesafety Power RGM75B-C8PZ/T4-A 75W power supply 6A/12V or 3A

Dual primary output (6A/12V or 3A/24V) supports both lock voltage standards from one unit.
Eight relay lock control outputs with per-output failsafe/failsecure selection, no external relay modules needed.
Adjustable 5–18V secondary rail at 4A powers auxiliary readers and sensors on an independent circuit.

$2,044.00 $1,477.99 Save $566.01

Add to Cart

The item has been added

Free shipping over $499

$2,044.00 $1,477.99 Save $566.01

Add to cart Add to quote Compare

Lifesafety Power

SKU: FPO75-2D8PE1

Lifesafety Power FPO75-2D8PE1 75W power supply 6A/12V or 3A/24V

16 supervised Class 2 outputs (2.5A each) isolate faults without cascading failures.
Dual-bus architecture segments 12V and 24V loads in one panel, reducing wiring complexity.
E1 enclosure (14H×12W×4.5D in.) mounts on 19-inch rack rails or wall on 4-inch centers.

$474.00 $342.99 Save $131.01

Add to Cart

The item has been added

Free shipping over $499

$474.00 $342.99 Save $131.01

Add to cart Add to quote Compare

Lifesafety Power

SKU: FPO75-2D8PE2M

Lifesafety Power FPO75-2D8PE2M 75W power supply 6A/12V or 3A/24V

Delivers 6A@12VDC or 3A@24VDC from one AC input to fit mixed-voltage site designs.
Eight independently current-limited 2.5A outputs reduce homerun wiring across access zones.
Per-output Bus1/Bus2 assignment enables zone isolation without additional distribution hardware.

$645.00 $423.99 Save $221.01

Add to Cart

The item has been added

Free shipping over $499

$645.00 $423.99 Save $221.01

Add to cart Add to quote Compare

Lifesafety Power

SKU: RGM75-D8P

Lifesafety Power RGM75-D8P 75W power supply 6A/12V or 3A/24V

Selectable 12VDC/6A or 24VDC/3A output eliminates stocking separate PSUs per voltage.
75W capacity supports 6–12 camera endpoints depending on per-device load profile.
DIN-rail form factor integrates cleanly into centralized power enclosures and panels.

$1,103.00 $724.99 Save $378.01

Add to Cart

The item has been added

Free shipping over $499

$1,103.00 $724.99 Save $378.01

Add to cart Add to quote Compare