Lifesafety Power

Lifesafety Power · FPO150-C82D8E2

Lifesafety Power FPO150-C82D8E2 150W 120 VAC

150W single-voltage (120 VAC input) power supply designed for access control and surveillance integration environments

• Delivers 150W regulated output to power multiple door strikes and mag locks.
• Eight relay lock outputs enable dedicated switched control for each door circuit.
• 16 auxiliary output circuits support alarm devices, strobes, and ancillary loads.

Lifesafety Power · FPO150-C4PE1

Lifesafety Power FPO150-C4PE1 4 Lock Outputs

150W class 2 power supply housed in an E1 enclosure, purpose-built for access control and lock management in commercial security systems

• Four independent 2.5A outputs support 12V or 24V locks from a single 150W supply.
• Class 2 rating eliminates separate power-limited circuit wiring for each lock run.
• E1 enclosure suits cabinet or wall-mount install in commercial controlled environments.

Lifesafety Power · FPO150-C4PD8PE4M

Lifesafety Power FPO150-C4PD8PE4M 150W Power Supply

150W distributed power supply rated for 12A at 12V or 6A at 24V output

• 150W supply delivers 12A/12V or 6A/24V to support mid-scale access control loads.
• 4 relay lock outputs and 8 DC aux outputs, each class 2 limited at 2.5A per circuit.
• Per-output failsafe/failsecure and Bus1/Bus2 selection simplifies multi-door redundancy design.

Lifesafety Power · FPO150-C4E2M

Lifesafety Power FPO150-C4E2M FPO150-C4E2M

Compact 150W power supply designed to support distributed security deployments where multiple devices require independent, supervised power rails

Lifesafety Power · FPO150-C4E1

Lifesafety Power FPO150-C4E1 4x3A Fused Outputs

150W fused power distribution unit designed to supply door locks and other access control devices in multi-unit installations

• Four independently fused 3A outputs prevent a single lock fault from cascading.
• Delivers 12A at 12V or 6A at 24V to power up to four access control lock circuits.
• Compact E1 enclosure mounts inside standard equipment racks or wall cabinets.

Lifesafety Power · FPO150-C4D8E2

Lifesafety Power FPO150-C4D8E2 150W 12V

150W power distribution board designed for access control, door lock, and multi-endpoint security deployments

• Delivers 150W at 12A/12VDC or 6A/24VDC to match legacy and modern lock hardware.
• Four supervised relay outputs control independent high-current loads without external modules.
• DIN-rail and 19-inch rack-mount form factor fits standard security enclosures directly.

Lifesafety Power · FPO150-C4D8E1

Lifesafety Power FPO150-C4D8E1 150W 4 Aux Out

Compact 150W supervised power supply engineered for small-to-mid-scale security installations where you need distributed power with individual

• Delivers 12A at 12VDC or 6A at 24VDC to power cameras, strikes, and controllers.
• Four independent 3A-fused outputs isolate faults and prevent cascading circuit failures.
• 150W supervised supply suits small-to-mid-scale distributed security deployments.

Lifesafety Power · FPO150-B100C4D8PE4M

Lifesafety Power FPO150-B100C4D8PE4M 4 Door

Four-door power supply designed to support networked access control and entry management installations

• Centralizes power for four doors in one enclosure, reducing wiring runs.
• Supports magnetic locks, door lock hardware, and integrated readers.
• Sized for small-to-mid commercial sites: offices, warehouses, secured corridors.

Lifesafety Power · FPO150-B100C4D8E4M1

Lifesafety Power FPO150-B100C4D8E4M1 FPO150-B100C4D8E4M1

150W supervised power supply designed for small to mid-scale security installations where reliable power distribution and tamper detection matter

• 150W supervised output supports small-to-mid-scale security device loads.
• Supervision detects power loss, wiring faults, and enclosure breaches automatically.
• Battery backup support maintains uptime during mains failure in unmanned sites.

Lifesafety Power · FPO150-B150M8NLCE2M1

Lifesafety Power FPO150-B150M8NLCE2M1 150W 12A/12V

150W regulated power supply with eight independently fused outputs, each rated at 3A maximum draw

• Eight independently fused 3A outputs protect individual endpoints without killing the full deployment.
• 150W capacity delivers 12A @ 12VDC or 6A @ 24VDC—select voltage at commissioning for all outputs.
• Accepts AC 110–240V input, fitting standard mains without a step-down transformer in most regions.

Lifesafety Power · FPO150-B150M8NLCSD16E6M/P8-A

Lifesafety Power FPO150-B150M8NLCSD16E6M/P8-A

150W managed power distribution unit designed for mid-scale IP security deployments where you need to power multiple ancillary devices—cameras

• 8 independently fused 3A outputs isolate faults to a single device or zone.
• Selectable 12VDC/12A or 24VDC/6A output suits varied field device voltage needs.
• M8 module enables real-time load monitoring and integration with control panels.

Lifesafety Power · FPO150-B150D8PE2

Lifesafety Power FPO150-B150D8PE2 150W 12A/12V

150W power supply rated for 12A at 12VDC or 6A at 24VDC, designed to distribute power across distributed security infrastructure

• Delivers 150W at 12VDC/12A or 24VDC/6A, eliminating a second supply on mixed-voltage runs.
• Eight 2.5A Class 2 outputs, each independently switchable to Bus 1 or Bus 2 for load isolation.
• Per-output bus selection reduces single-point-of-failure risk across access control and camera feeds.

Lifesafety Power · FPO150-B150D8M8NLCE2S

Lifesafety Power FPO150-B150D8M8NLCE2S 150W 12A/12V

150W industrial power supply rated for 12A/12V or 6A/24V operation

• 8 independently fused 3A DC outputs prevent single-device faults from cascading.
• 150W budget supports 12A/12V or 6A/24V operation across multi-zone deployments.
• Per-output Bus1/Bus2 selectability enables isolated distribution in access control networks.

Lifesafety Power · FPO150-B150C8D8PE4M

Lifesafety Power FPO150-B150C8D8PE4M 150W 12/24V

150W programmable dual-voltage power supply with 8 auxiliary power outputs and integrated fire alarm interface

• 150W supply runs up to 12A at 12V or 6A at 24V for multi-door deployments.
• 8 individually fused auxiliary outputs allow independent circuit protection per door.
• Integrated fire alarm interface supports fail-safe and fail-secure lock switching.

Lifesafety Power · FPO150-B1502M8NLCE4M1

Lifesafety Power FPO150-B1502M8NLCE4M1 150W 150W

150W managed distribution power supply delivering 12A at 12V or 6A at 24V — sized for mid-scale surveillance systems running 8–12 compact cameras or

• Delivers 12A at 12V across 8 independently fused 3A outputs for fault isolation.
• 150W continuous capacity supports 8–12 compact cameras or access control devices.
• Single-unit managed distribution eliminates stacking separate PSUs and surge strips.

Lifesafety Power · FPO150-B1002C8E4M1

Lifesafety Power FPO150-B1002C8E4M1 FPO150-B1002C8E4M1

Compact 150-watt power supply designed for multi-output security deployments where space and cable management matter

• 150W total capacity supports 4–6 cameras or access control readers from one supply.
• Multi-output distribution eliminates multiple wall-mount supplies, reducing wiring complexity.
• Compact footprint suits rack, wall, or cabinet installs with constrained space.

Lifesafety Power · FPO150-B100M8NLCSD16E4M/T8-A

Lifesafety Power FPO150-B100M8NLCSD16E4M/T8-A 150W

150W managed power distribution unit built for small to mid-sized surveillance installations where you need compact, distributed DC power with

• Delivers 150W at 12V/12A or 24V/6A to power cameras, readers, and locks.
• 8 individually fused 3A output ports prevent a single short from cascading.
• Mounts in a compact B100 steel enclosure on wall or DIN rail for tight spaces.

Lifesafety Power · FPO150-B100M8NLC2SD4PE6M

Lifesafety Power FPO150-B100M8NLC2SD4PE6M 150W 12A

Compact 150W managed power distribution module built for multi-camera surveillance and access control deployments where you need independent fused

• 150W total output runs up to 8 IP cameras and door controllers from one supply point.
• Eight independently fused 3A outputs isolate faults so one short won't kill the full install.
• Selectable 12A/12VDC or 6A/24VDC output accommodates mixed device voltages on one unit.

Lifesafety Power · FPO150-B100E1

Lifesafety Power FPO150-B100E1 FPO150-B100E1

150W dual-voltage power supply that delivers up to 4A at 12V and 4A at 24V simultaneously — solving the common integration problem where a single

• Delivers 4A at 12V and 4A at 24V simultaneously from a single 150W supply.
• Eliminates separate power feeds for mixed 12V sensors and 24V access control devices.
• E1 enclosure fits standard wall-mount or rack installs in control rooms and closets.

Lifesafety Power · FPO150-B100D8PM8PNLCE4M1

Lifesafety Power FPO150-B100D8PM8PNLCE4M1 150W 12A

150W managed power distribution module purpose-built for multi-camera and access control deployments where independent output management matters

• Delivers 12A at 12VDC or 6A at 24VDC from a single primary rail—selectable at deployment.
• Eight individually supervised auxiliary outputs, each capped at 2.5A with Bus1/Bus2 routing.
• Consolidates core and edge device power in one unit, reducing cable runs on mid-scale installs.