Lenovo 4X97A93744 SR630 V3 M.2 Sata/nvme CFF CBL

Lenovo 4X97A93744 SR630 V3 M.2 SATA/NVMe CFF Cable

Overview

The Lenovo 4X97A93744 is an M.2 CFF (cable form factor) interconnect designed for the ThinkSystem SR630 V3 rack server, enabling both SATA and NVMe M.2 storage devices to be routed and secured within the server chassis. If you are expanding or replacing internal M.2 storage connectivity on an SR630 V3, this is the correct Lenovo-sourced cable for the job — using a generic or mismatched cable risks degraded signal integrity or incompatibility with the server's backplane management. Sourced factory-new through channel-direct distribution, no grey-market, no parallel imports.

Key Features

• Dual-protocol support — SATA and NVMe: The 4X97A93744 handles both SATA and NVMe M.2 devices, so you are not locked into a single storage tier. Deploy a SATA M.2 SSD for OS boot alongside an NVMe M.2 drive for high-speed scratch or cache — a single cable handles both signal types without adapters.
• M.2 CFF form factor: The CFF (cable form factor) design routes the M.2 interface off the motherboard to a chassis-mounted slot, freeing board real estate and allowing tool-assisted hot-serviceability depending on SR630 V3 configuration. This matters in dense rack environments where access to the board directly is restricted.
• SR630 V3 platform specificity: Lenovo server accessories are validated against specific platform generations. Using the correct generation cable — not a carry-forward part from SR630 V2 or a third-party substitute — ensures backplane signal compatibility and keeps the system within Lenovo's supported configuration for firmware updates and warranty service.
• Country of origin — Mexico: Manufactured in Mexico, consistent with Lenovo's North American ThinkSystem supply chain. Relevant for procurement teams with TAA or domestic-sourcing documentation requirements — verify TAA compliance status with your procurement team for specific contract requirements.

Integration & Compatibility

The 4X97A93744 is designed specifically for the Lenovo ThinkSystem SR630 V3 server platform. Confirm your server generation before ordering — SR630 V2 uses a different cable routing and connector layout. This cable supports the M.2 slots designated for internal storage; it is not a PCIe riser or external cable. If you are building out a network video recorder backend on ThinkSystem SR630 V3 hardware — a common pattern for high-channel-count IP camera deployments requiring local redundant storage — this cable is part of the internal storage expansion path. Pair with Lenovo-qualified M.2 NVMe or SATA SSDs for a supported storage configuration.

Frequently Asked Questions

Q: What server platform is the 4X97A93744 designed for?

A: The 4X97A93744 is designed for the Lenovo ThinkSystem SR630 V3. It is not cross-compatible with SR630 V2 or other ThinkSystem generations — confirm your server model before ordering.

Q: Does this cable support both NVMe and SATA M.2 drives?

A: Yes. The 4X97A93744 supports both NVMe and SATA interface M.2 devices, enabling mixed storage configurations within the SR630 V3 chassis.

Q: Is the 4X97A93744 a factory-new part?

A: Yes. This part is sourced factory-new through channel-direct distribution — not refurbished, grey-market, or parallel import.

Q: What is the UNSPSC code for this part?

A: The UNSPSC code is 26121620, which classifies it as an electronic cable/interconnect component.

Q: Is this cable TAA-compliant for U.S. federal procurement?

A: The part is manufactured in Mexico (MX). TAA compliance should be verified with your procurement team against current GSA schedule requirements before committing to a federal contract purchase.

James Everett

The 4X97A93744 is a platform-specific M.2 CFF cable — the detail that matters here is the dual SATA/NVMe protocol support within a single cable assembly. In SR630 V3 builds where you are mixing storage tiers (NVMe for primary workload, SATA M.2 for secondary or OS), this cable handles both without requiring separate routing or adapters inside a chassis that already has tight clearances.

Technical Highlights:

• Dual Interface (NVMe + SATA): Both protocols supported over the same M.2 CFF cable — relevant when the SR630 V3 slot assignment supports mixed-type M.2 population without recabling.
• M.2 CFF Routing: Cable form factor moves the M.2 slot off-board, which is the correct approach in 1U rack servers where direct-board M.2 access is blocked by heatsinks and airflow baffles.
• Mexico Origin: Consistent with Lenovo's North American ThinkSystem supply chain — relevant for procurement audit trails and sourcing documentation.

Deployment Considerations:

• Verify your SR630 V3 configuration guide for which M.2 slots use this cable routing versus direct-board attachment — not all slot positions in the SR630 V3 use a CFF cable, and ordering the wrong accessory for a direct-board slot is a common mistake.
• The listed 10 lb weight reflects shipping/packaging weight, not the cable itself — do not use this figure for rack load calculations.

Best fit for SR630 V3 deployments adding M.2 storage expansion — particularly in NVR backend builds or edge compute nodes where internal storage density and signal integrity on M.2 lanes are both requirements.