Lenovo 4X97A88522 SR630 V3 M.2 SATA/X4 NVME SFF RAID CBL

Lenovo 4X97A88522 SR630 V3 M.2 SATA/x4 NVMe SFF RAID Cable

The Lenovo 4X97A88522 is the OEM RAID cable assembly designed for the Lenovo ThinkSystem SR630 V3 server platform, enabling M.2 SATA and x4 NVMe solid-state drives to connect to the system's RAID subsystem in Small Form Factor (SFF) drive configurations. If you're expanding or replacing storage infrastructure in an SR630 V3 chassis, this is the cable that keeps your drive topology intact without improvising with generic alternatives that risk signal integrity or physical fitment.

Overview

Server cable assemblies like the 4X97A88522 are the kind of part that stops a rack build cold when missing. This cable bridges the M.2 slot — supporting both SATA and x4 NVMe interfaces — to the RAID controller inside the SR630 V3. The dual-interface design matters: it means a single cable SKU covers both SATA-based M.2 SSDs (lower cost, boot/OS drives) and x4 NVMe M.2 SSDs (higher throughput, latency-sensitive workloads), so you're not stocking two separate part numbers for two drive types. The SFF form factor designation aligns this cable to SR630 V3 chassis configurations using 2.5-inch drive bays, which is the standard for rack-optimized, density-focused server deployments.

Weighing 2.0 lb, the assembly includes the connectors, routing hardware, and retention elements as shipped from Lenovo's factory. Genuine OEM sourcing is the only reliable path here — third-party cable substitutes for M.2 NVMe paths in enterprise servers routinely cause RAID controller recognition failures that are difficult to diagnose and time-consuming to trace. Using the factory-specified 4X97A88522 eliminates that variable from the troubleshooting matrix.

Key Features

• Dual-Interface Support (SATA + x4 NVMe): One cable accommodates both M.2 SATA and M.2 x4 NVMe drives in the SR630 V3 — reducing spare-parts SKU count and giving you flexibility to swap between drive classes without a cable change during a storage refresh.
• SR630 V3 Platform-Specific Design: Engineered to route, seat, and latch within the SR630 V3 chassis geometry. OEM fitment means no cable-management hacks, no strain on connectors, and no blocked airflow paths that a mis-routed aftermarket cable would create in a tightly managed 1U chassis.
• SFF Drive Bay Compatibility: The SFF form factor alignment means this cable works within the 2.5-inch drive bay ecosystem standard in rack-dense environments — enterprise NVR clusters, hyperconverged nodes, and edge compute deployments where U-count is at a premium.
• Factory-New Genuine Assembly: Sourced direct from the manufacturer supply chain. Connector quality, cable shielding, and strain relief are to Lenovo's manufacturing spec — not approximated. For RAID-attached NVMe paths, connector integrity directly affects sustained read/write reliability and error rates.
• UNSPSC 26121624 Classification: Properly classified as a power/signal cable assembly component — useful for procurement teams routing this through capital or operating expense categories aligned to infrastructure hardware.

Integration & Compatibility

The 4X97A88522 is designed specifically for the Lenovo ThinkSystem SR630 V3 server. Before ordering, confirm your SR630 V3 configuration includes M.2 drive slots and the corresponding RAID or HBA controller that this cable routes to — the SR630 V3 supports multiple storage configurations, and cable requirements vary by backplane and controller combination. Consult Lenovo's SR630 V3 configuration guide or your system's options documentation to verify this is the correct cable for your specific build. For broader server accessory needs in the SR630 V3 ecosystem, cross-reference the Lenovo Options and Accessories catalog against your chassis generation to avoid cross-generation cable mismatches.

Frequently Asked Questions

Q: What server platform is the Lenovo 4X97A88522 designed for?

A: The 4X97A88522 is designed for the Lenovo ThinkSystem SR630 V3 server platform, specifically for M.2 SATA and x4 NVMe drive connections in Small Form Factor (SFF) configurations.

Q: Does the 4X97A88522 support both SATA and NVMe M.2 drives?

A: Yes. The cable supports both M.2 SATA and M.2 x4 NVMe interface types, allowing flexibility across different drive classes within the SR630 V3 storage subsystem.

Q: What is the weight of the 4X97A88522?

A: The assembly weighs 2.00 lb as listed in Lenovo's distribution data.

Q: Can this cable be used in other Lenovo server models besides the SR630 V3?

A: Based on available evidence, the 4X97A88522 is specified for the SR630 V3 platform. Cross-generation or cross-model use is not confirmed in the source data — verify against Lenovo's options documentation before using in any other chassis.

Q: Is this a genuine Lenovo part or an aftermarket cable?

A: This is a genuine Lenovo OEM cable assembly, sourced through authorized distribution channels — not an aftermarket substitute.

Marty Allison

The 4X97A88522 is the kind of part that rarely gets attention until it's missing from a rack build — and then it stops everything. As the OEM-specified M.2 SATA/x4 NVMe RAID cable for the SR630 V3, it handles both drive interface types in a single assembly, which matters when you're configuring mixed storage tiers in a 1U chassis where every millimeter of cable routing is deliberate.

Technical Highlights:

• Dual Interface (SATA + x4 NVMe): A single cable covers both M.2 drive classes — useful when your SR630 V3 storage plan includes a SATA M.2 boot drive alongside an NVMe caching or application drive, without needing two separate cable SKUs.
• SFF Platform Alignment: The Small Form Factor designation confirms compatibility with 2.5-inch drive bay SR630 V3 configurations — the standard layout for density-optimized rack deployments in edge compute and enterprise environments.
• OEM Assembly Weight (2.0 lb): Includes all routing hardware, connectors, and retention elements as shipped — not a bare cable. That weight signals a complete, ready-to-install assembly rather than a bare wire you'd need to terminate yourself.

Deployment Considerations:

• Verify your specific SR630 V3 storage configuration before ordering — the SR630 V3 supports multiple backplane and controller combinations, and not every build uses the same cable topology. Lenovo's system configuration guide for the SR630 V3 is the authoritative source.
• Do not substitute aftermarket M.2 NVMe cables in RAID-attached paths. Connector quality and shielding on generic cables are inconsistent, and RAID controller recognition failures from a bad cable are notoriously hard to diagnose under production conditions.

The 4X97A88522 is the right call for SR630 V3 deployments where M.2 NVMe or SATA drives are part of the RAID configuration — specifically edge compute nodes, hyperconverged infrastructure builds, or enterprise NVR back-end storage servers where the SR630 V3 is the chosen platform and OEM cable integrity is non-negotiable.