Lenovo 4X97A88464 SR650 V3 M.2 SATA/X4 NVME SFF RAID CBL

Lenovo 4X97A88464 SR650 V3 M.2 SATA/NVMe SFF RAID Cable

Overview

The Lenovo 4X97A88464 is a Small Form Factor (SFF) RAID cable engineered specifically for the ThinkSystem SR650 V3 server platform, providing dual-interface support for both M.2 SATA and x4 NVMe storage devices. If you are expanding or replacing internal cabling in an SR650 V3 to support mixed M.2 boot or data drives, this is the correct Lenovo-specified part for that configuration. Using a non-OEM substitute risks connector incompatibility and can compromise RAID controller signaling integrity — a genuine Lenovo cable removes that variable from your build.

Key Features

• Dual-Interface Support (NVMe + SATA): The 4X97A88464 handles both x4 NVMe and SATA signaling on a single cable run, so you are not locked into a single M.2 storage protocol. Environments running a SATA M.2 OS drive alongside an NVMe data drive can use this cable without sourcing two separate assemblies.
• SFF (Small Form Factor) Form Factor: Designed for SFF chassis configurations within the SR650 V3, this cable routes correctly within the server's internal geometry. Forcing a non-SFF cable into an SFF bay risks pinch points and connector stress — the SFF-spec cable eliminates that risk by design.
• SR650 V3 Platform-Specific: Lenovo server platforms use keyed, platform-validated cable assemblies. The 4X97A88464 is matched to the SR650 V3's backplane and RAID controller pinout — substituting a generic M.2 cable may result in a drive that initializes but is not recognized by the RAID controller, which is a failure mode that typically surfaces only under load.
• Manufactured in Mexico (MX): Origin traceability matters for procurement teams with supply-chain compliance requirements. The MX country of origin is documented in the product record for audit purposes.
• UNSPSC 26121624: Pre-classified under the correct commodity code for data storage cable assemblies, which simplifies PO processing for procurement systems that require UNSPSC tagging on line items.

Integration and Compatibility

The 4X97A88464 is validated for use in the Lenovo ThinkSystem SR650 V3 server. Verify your SR650 V3 configuration — SFF vs. LFF bay layout and RAID controller model — against the Lenovo ServerProven compatibility matrix before ordering. This cable is not specified for the SR650 V2 or other ThinkSystem platforms; Lenovo maintains separate cable part numbers per generation, and cross-generation substitution is not supported. If your deployment involves network infrastructure planning or server hardware sourcing, confirm the full Bill of Materials against the SR650 V3 hardware maintenance manual.

Frequently Asked Questions

Q: Is the Lenovo 4X97A88464 compatible with the SR650 V2?

A: No. The 4X97A88464 is specified for the ThinkSystem SR650 V3. Lenovo uses platform-specific cable assemblies across server generations. Consult Lenovo's hardware maintenance manual for the SR650 V2 to identify the correct part number for that platform.

Q: Does this cable support both SATA and NVMe M.2 drives simultaneously?

A: The cable provides both SATA and x4 NVMe interface support, making it suitable for mixed M.2 configurations within the SR650 V3. Whether both can be active simultaneously depends on the SR650 V3's RAID controller configuration and available M.2 slots — verify against your server's configuration guide.

Q: What is the country of origin for the 4X97A88464?

A: Mexico (MX), as documented in the product's structured attribute data.

Q: What does the UNSPSC code 26121624 indicate?

A: UNSPSC 26121624 classifies this product under data storage cable assemblies, which assists procurement systems that require commodity coding on purchase orders.

Ted Perry

The 4X97A88464 is one of those parts that looks trivial until you need it mid-deployment. Its dual-interface design — supporting both M.2 SATA and x4 NVMe on a single SFF cable — is what makes it the correct part for SR650 V3 builds where you are mixing storage protocols, such as a SATA M.2 for the OS and an NVMe M.2 for a high-throughput workload volume.

Technical Highlights:

• Dual NVMe/SATA Interface: A single cable covers both x4 NVMe and SATA M.2 signaling, reducing the number of internal cable runs and simplifying SR650 V3 bay management in dense configurations.
• SFF Form Factor: The SFF-specific routing geometry fits cleanly within the SR650 V3's SFF chassis without cable stress at the connector seat — a detail that matters for long-term signal reliability in 24/7 server environments.
• MX Origin Documentation: Country of origin (Mexico) is attribute-level documented, which satisfies procurement audit requirements for federal and enterprise supply-chain tracking without extra research effort.

Deployment Considerations:

• Confirm your SR650 V3 is in an SFF bay configuration before ordering — LFF variants of the SR650 V3 use different cable assemblies, and this part is not interchangeable across bay formats.
• Lenovo increments cable part numbers by server generation; do not assume this cable fits the SR650 V2 or SR650 even if the physical connectors appear similar. Cross-generation use is unsupported and risks silent RAID controller recognition failures.

For SR650 V3 deployments in data center or edge server builds where M.2 storage protocol flexibility is a configuration requirement, the 4X97A88464 is the Lenovo-specified cable assembly that eliminates compatibility guesswork from the internal storage layer.