Lenovo 4XH7A93745 SR630 V3 7MM Sata/nvme CFF KIT

Lenovo 4XH7A93745 SR630 V3 7mm SATA/NVMe CFF Drive Bay Kit

Overview

The Lenovo 4XH7A93745 is a 7mm compact form factor (CFF) drive bay kit designed for the ThinkSystem SR630 V3 rack server, enabling installation of 7mm SATA or NVMe drives in a chassis that otherwise accommodates only standard-height bays. If your SR630 V3 deployment calls for thinner 7mm SSDs — common in storage-dense or cost-optimized configurations — this kit provides the mechanical adapter and retention hardware needed to seat and secure those drives correctly. Without it, 7mm drives will not mount reliably in the SR630 V3 chassis, creating vibration risk and potential data loss in production environments. Sourced factory-new as a genuine Lenovo option part.

Compatibility

Designed specifically for the Lenovo ThinkSystem SR630 V3 rack server. Supports both NVMe and SATA interface drives in the 7mm height form factor — cover the two dominant enterprise SSD protocols in a single kit. Verify your SR630 V3 configuration and target drive height before ordering; this kit is specific to the 7mm CFF profile and is not interchangeable with standard 2.5-inch (9.5mm or 15mm) drive bay hardware. Consult your server storage bill of materials or Lenovo configuration guide to confirm the correct bay kit SKU for your drive population.

Installation Notes

Installation is mechanical — no firmware or driver component. Fit the 4XH7A93745 adapter into the target bay slot of the SR630 V3 before inserting the 7mm drive; the kit provides the carrier geometry that locks the thinner drive at the correct depth and contact angle for the backplane connector. Follow standard Lenovo ESD precautions and server maintenance procedures. Weight of the kit as shipped is 10.00 lb including packaging. Country of origin: Mexico.