Lenovo 4XH7A93167 SR665 V3/SR655 V3 7MM RAID Sata/nvme KIT

Lenovo 4XH7A93167 7mm RAID SATA/NVMe Drive Kit

Overview

The Lenovo 4XH7A93167 is a 7mm RAID-capable SATA/NVMe drive enablement kit designed for Lenovo ThinkSystem rack servers. If you are expanding or configuring storage subsystems on SR665 V3 or SR655 V3 platforms, this kit provides the hardware needed to seat 7mm form-factor drives in RAID-controlled bays — eliminating the guesswork of sourcing compatible drive carriers and backplane hardware separately. The dual-interface support (NVMe and SATA) means the same kit works whether your storage architecture leans on NVMe for low-latency workloads or SATA for higher-capacity, cost-effective tiers. At 2.00 lb, it ships ready to install without additional hardware orders.

Compatibility

This kit is specifically validated for:

• Lenovo ThinkSystem SR665 V3 — AMD EPYC-based 2U rack server
• Lenovo ThinkSystem SR655 V3 — single-socket AMD EPYC 2U rack server

The 7mm drive height specification is a hard constraint — standard 9.5mm or 15mm SATA/NVMe drives will not seat correctly in the bays this kit supports. Verify your drive vendor's physical height before ordering. This kit does not extend compatibility to other ThinkSystem generations (SR650 V2, SR630, etc.) or to Lenovo Storage product lines — check the Lenovo ServerProven database for those platforms.

Installation Notes

Installation is limited to the SR665 V3 and SR655 V3 chassis bays designated for 7mm drives. Confirm your server's current drive bay population and backplane revision before installing — some early-production SR665 V3 units shipped with configurations requiring a firmware update to expose NVMe namespaces correctly under the RAID controller. Country of origin is Mexico (MX). UNSPSC commodity code 43211600 (Computer Storage Products).