Lenovo 4X97A83825 SR630 V3 4X3.5INC Anybay BP Sas/sata CBL

Lenovo 4X97A83825 SR630 V3 Anybay SAS/SATA Backplane Cable

Overview

The Lenovo 4X97A83825 is a factory-new, genuine internal cable assembly designed for the ThinkSystem SR630 V3 server platform, specifically enabling the 4x3.5-inch Anybay backplane to communicate over both SAS and SATA interfaces. If you are configuring or repairing an SR630 V3 storage subsystem, this cable is the correct OEM interconnect between the backplane and the host bus adapter or onboard controller — not an aftermarket substitute, not a generic SFF-8643 assembly.

Manufactured in Mexico, the 4X97A83825 carries a shipping weight of 10.00 lb, which accounts for protective packaging standard for server-grade internal components. The UNSPSC classification 26121620 confirms this as a storage connectivity cable within Lenovo's Lenovo server accessory catalog.

Key Features

• Dual-Protocol Support (SAS and SATA): The Anybay backplane architecture lets you mix SAS HDDs, SATA HDDs, and SATA SSDs in the same bay row without a separate expander card. This cable carries both protocol signals, so your drive mix is determined by the drives you install — not by a fixed backplane wiring commitment. Relevant for storage networking builds where workload requirements evolve.
• Platform-Specific Design: Engineered for the SR630 V3 4x3.5-inch bay configuration. Using a non-OEM or incorrect-generation cable risks connector mis-alignment, intermittent drive drops, and voided platform support — risks not worth taking on a production server. This is the part that belongs in that slot.
• Factory-New, Genuine Component: Sourced as a new Lenovo part — not refurbished, not pulled. For servers and storage carrying production workloads, genuine new cabling is the baseline, not an upgrade.

Integration & Compatibility

The 4X97A83825 is designed exclusively for the Lenovo ThinkSystem SR630 V3 with the 4x3.5-inch Anybay backplane option. It is not cross-compatible with SR630 V2, SR650, or other ThinkSystem platforms — backplane connectors and cable routing differ across generations. Verify your SR630 V3 server component configuration in Lenovo's ServerProven tool or your system's hardware maintenance manual before ordering. Country of origin is Mexico (MX).

Frequently Asked Questions

Q: Is the 4X97A83825 compatible with the SR630 V2?

A: No. This cable is designed specifically for the SR630 V3 4x3.5-inch Anybay backplane. The SR630 V2 uses a different backplane and cable generation. Check your platform documentation before ordering.

Q: Does this cable support both SAS and SATA drives simultaneously?

A: Yes. The Anybay backplane design supported by the 4X97A83825 allows mixed SAS and SATA drive populations in the same 4-bay row — protocol assignment is determined by the installed drive, not by the cable.

Q: What is the country of origin for the 4X97A83825?

A: Mexico (MX), per Lenovo's distribution documentation.

Q: Is this a new or refurbished part?

A: Factory-new. This is a genuine Lenovo component, not refurbished or pulled from a decommissioned system.

Q: What does the UNSPSC code 26121620 indicate?

A: UNSPSC 26121620 classifies this part as a storage connectivity cable — consistent with its function as a SAS/SATA backplane interconnect for server platforms.

Ted Perry

The 4X97A83825 is one of those parts that looks interchangeable until it isn't. The SR630 V3 Anybay backplane is generation-locked — the SAS/SATA dual-protocol signal routing is specific to the V3 connector layout, and substituting a V2-era or third-party cable will produce drive detection failures that are frustrating to diagnose mid-deployment.

Technical Highlights:

• SAS + SATA Dual Protocol: A single cable assembly carries both SAS and SATA signaling to the 4x3.5-inch Anybay bay block. This is what enables drive-type flexibility without re-cabling when you swap from SATA HDDs to SAS HDDs or SSDs in the same bays.
• SR630 V3 Platform Specificity: Engineered for the V3 chassis geometry and backplane connector pinout. The 10 lb shipping weight reflects the protective packaging Lenovo uses for precision server interconnects — the cable itself is lightweight, but arrives packaged to prevent connector damage in transit.
• Genuine OEM Part (Origin: Mexico): Factory-new from Lenovo's manufacturing in Mexico. For a storage interconnect on a production server, genuine OEM is the only defensible choice — third-party cables introduce a variable into drive-drop troubleshooting that you don't want.

Deployment Considerations:

• Confirm your SR630 V3 backplane option code before ordering. Lenovo offers multiple backplane configurations for the SR630 V3 (2.5-inch NVMe, 3.5-inch Anybay, mixed) — the 4X97A83825 maps specifically to the 4x3.5-inch Anybay variant. A mismatch means the connectors won't seat.
• This cable does not add NVMe capability. Anybay supports SAS and SATA only through this assembly. If your storage roadmap includes NVMe U.2 drives in these bays, that requires a separate Anybay NVMe cable and a compatible retimer or HBA — plan that before the chassis is racked.

The 4X97A83825 fits one scenario cleanly: an SR630 V3 build or repair where the 4x3.5-inch Anybay backplane needs its SAS/SATA interconnect. If that matches your platform, order with confidence. If you are unsure of your backplane option, pull the server's machine type and model from the front bezel and cross-reference against Lenovo's parts lookup before committing.