Lenovo 4X97A59983 SR630 V2 10 Anybay BP Sas/sata CBL V2

Lenovo 4X97A59983 SR630 V2 10-Bay Anybay SAS/SATA Backplane Cable

The Lenovo 4X97A59983 is an internal SAS/SATA backplane cable designed specifically for the ThinkSystem SR630 V2 server in 10-bay Anybay drive configurations. If you are expanding or replacing the storage interconnect in an SR630 V2 chassis — whether commissioning a new build or restoring a damaged cable run — this is the OEM-matched part that keeps the backplane talking to the controller without compatibility guesswork.

Overview

Anybay backplanes support both SAS/SATA and NVMe drives in the same bay configuration, giving administrators flexibility to mix drive types as storage needs evolve. The 4X97A59983 provides the SAS/SATA signal path in that hybrid topology. Pulling the wrong cable — or substituting an aftermarket alternative — risks signal integrity issues that may not surface immediately but degrade reliability under sustained I/O load. Using the correct Lenovo part eliminates that variable from your troubleshooting surface.

Key Features

• Dual-interface SAS and SATA support: A single cable handles both SAS and SATA drive types, which matters in Anybay configurations where the backplane must negotiate multiple drive protocols simultaneously. You do not need separate cables per drive type.
• SR630 V2 platform fit: Engineered to the mechanical and electrical tolerances of the ThinkSystem SR630 V2 chassis. Internal cable routing in 1U/2U rack servers is tight — an incorrectly dimensioned cable can block airflow or fail to seat connectors fully. This part routes as Lenovo intended.
• 10-bay Anybay backplane geometry: The cable is matched to the 10-drive Anybay backplane layout. Attempting to use a cable from a different bay-count variant risks connector mismatch or insufficient lead length.
• Compact form factor at 1.30 lb: At 11.50 x 9.80 x 2.20 inches and 1.30 lb, this cable is dimensioned for internal chassis installation — not a field-routing concern, but relevant when ordering spares for a densely-packed rack environment where every gram of vibration matters.

Integration and Compatibility

The 4X97A59983 is validated for the Lenovo ThinkSystem SR630 V2 with 10-bay Anybay backplane configurations. If you are working with a different SR630 V2 backplane option (for example, an all-NVMe or pure SAS backplane variant), confirm your specific backplane part number before ordering — Lenovo produces several cable variants tied to specific backplane and drive-count combinations. UNSPSC code 43211600 classifies this as a computer storage device cable/component, consistent with its function as a server storage interconnect.

For integrators managing multi-server deployments across Lenovo ThinkSystem infrastructure, stocking a spare of the correct backplane cable variant per server model prevents extended downtime when a cable fails during a drive swap. Check your SR630 V2 configuration guide against this part number before purchasing spares for mixed backplane environments.

Frequently Asked Questions

Q: What server platform is the 4X97A59983 designed for?

A: The 4X97A59983 is designed for the Lenovo ThinkSystem SR630 V2 server in a 10-bay Anybay backplane configuration.

Q: Does this cable support both SAS and SATA drives?

A: Yes. The 4X97A59983 supports both SAS and SATA interfaces, consistent with the Anybay backplane's multi-protocol design.

Q: Can this cable be used in a different ThinkSystem model?

A: This cable is validated for the SR630 V2 with the 10-bay Anybay backplane. Compatibility with other ThinkSystem platforms or backplane variants is not confirmed from available evidence — verify against your server's configuration guide before ordering.

Q: What are the physical dimensions and weight?

A: The 4X97A59983 measures 11.50 x 9.80 x 2.20 inches and weighs 1.30 lb.

Q: Is this part factory-new or a refurbished component?

A: This is a factory-new, genuine Lenovo component sourced through distribution — not a refurbished or aftermarket substitute.

Marty Allison

The 4X97A59983 is one of those parts that only matters when it fails — and when it does, you want the right cable on the shelf, not a week on backorder. At 11.50 x 9.80 x 2.20 inches, this SAS/SATA backplane cable is dimensioned to the SR630 V2 chassis, and the 10-bay Anybay backplane geometry means there is no universal substitute that drops in cleanly.

Technical Highlights:

• SAS + SATA dual-interface: Handles both protocols on a single cable run — critical for Anybay backplanes where mixed SAS/SATA drive populations are common in tiered storage configurations.
• Platform-specific geometry (11.50 x 9.80 x 2.20 in): Internal cable length and connector placement are matched to the SR630 V2 chassis. A cable that is 10mm too short or routed to the wrong connector header causes intermittent drive detection errors that mimic drive failure.
• 1.30 lb packaged weight: Lightweight enough to stock multiples per rack without logistics overhead — relevant for operations teams managing SR630 V2 deployments at scale.

Deployment Considerations:

• Confirm your SR630 V2 backplane option code before ordering. Lenovo produces multiple cable variants for the SR630 V2 tied to specific backplane configurations — the 10-bay Anybay is one of several. Cross-reference the server's feature-on-demand configuration or Lenovo's parts lookup with your serial number.
• This cable covers SAS/SATA signal paths only. If your Anybay backplane is configured for NVMe drives, those require a separate NVMe cable assembly — do not assume this part covers the full Anybay wiring complement.

The right home for this part is in the spares inventory for any data center or server room running SR630 V2 nodes in 10-bay Anybay configuration — particularly environments with high drive-swap frequency or systems running near-continuous I/O where cable wear is a real operational factor.