Lenovo 4X97A59985 SR630 V2 6+4ANYBAY BP Sas/sata CBL V2

Lenovo 4X97A59985 SR630 V2 6+4 AnyBay Backplane SAS/SATA Cable

Overview

The Lenovo 4X97A59985 is the OEM backplane cable assembly for the ThinkSystem SR630 V2 rack server, wiring the 6+4 AnyBay backplane to the system board over SAS and SATA interfaces. If you are replacing a damaged cable, reconfiguring a storage bay layout, or building a spare-parts inventory for SR630 V2 deployments, this is the correct factory part — not an aftermarket substitute. Getting the right cable matters here: the AnyBay backplane design supports both SAS/SATA and NVMe drive populations, and using a mismatched or third-party cable risks signaling issues that are difficult to diagnose after the fact.

Key Features

• SAS and SATA Interface Support: Dual-protocol wiring means the same cable serves spinning SATA drives and SAS HDDs or SSDs in the same backplane — no re-cabling if your drive mix changes between deployments.
• SR630 V2 Platform Fit: Designed specifically for the ThinkSystem SR630 V2's 6+4 AnyBay backplane geometry. Connector keying and cable routing conform to Lenovo's validated configuration, which matters for airflow management inside a 1U chassis where cable dress directly affects thermals.
• Compact Form Factor: At 11.50 x 9.80 x 2.20 in and 1.60 lb, the assembly is sized for the SR630 V2's internal bay layout — no trimming, no improvised routing required.

Integration and Compatibility

The 4X97A59985 is a platform-specific part. It is intended for the Lenovo ThinkSystem SR630 V2 server. Verify your server's backplane configuration (6+4 AnyBay) and existing cable routing before ordering — SR630 V2 configurations vary by ordered drive bay count, and not all chassis revisions use the same internal cable assembly. Cross-reference your server's Hardware Maintenance Manual or the Lenovo ServerProven configurator to confirm this is the correct cable for your specific build. Do not assume compatibility with SR630 (V1) or other ThinkSystem models without verification.

UNSPSC code 43211600 classifies this part under computer cables and cable assemblies, consistent with structured distribution data from Lenovo server components. If you are sourcing cables for a broader server storage infrastructure refresh, confirm each cable assembly against the specific server generation and backplane variant in use.

Frequently Asked Questions

Q: What server is the Lenovo 4X97A59985 designed for?

A: The 4X97A59985 is designed for the Lenovo ThinkSystem SR630 V2 server, specifically the 6+4 AnyBay backplane configuration. Verify your backplane variant before ordering.

Q: Does this cable support both SAS and SATA drives?

A: Yes. The 4X97A59985 supports both SAS and SATA interfaces, consistent with the AnyBay backplane design that accommodates mixed drive populations.

Q: Is this an OEM Lenovo part or an aftermarket cable?

A: This is a genuine factory Lenovo part sourced through distribution channels — not an aftermarket or third-party substitute.

Q: Will this cable work in the original SR630 (V1)?

A: This part is designated for the SR630 V2. Compatibility with SR630 V1 or other ThinkSystem models is not confirmed by available evidence — cross-reference your Hardware Maintenance Manual before ordering.

Karl Wilson

The 4X97A59985 is a platform-specific cable assembly — the kind of part that gets overlooked until a storage bay goes dark during a maintenance window. At 11.50 x 9.80 x 2.20 in, it's sized precisely for the SR630 V2 internal layout, and the SAS/SATA dual-interface design means it services the full AnyBay backplane regardless of whether you're running spinning SATA, SAS HDDs, or SAS SSDs in that bay group.

Technical Highlights:

• Dual SAS/SATA Interface: One cable assembly covers both protocol types — useful when drive populations shift between refreshes or when mixing drive tiers in the same backplane.
• SR630 V2 Platform Fit: OEM geometry means connector keying, cable length, and routing path match Lenovo's validated internal layout — no improvised dressing that could impede airflow in a 1U chassis.
• 1.60 lb Assembly Weight: Lightweight enough to install without support tools, but substantial enough to indicate a multi-connector harness rather than a single thin cable — appropriate for a 6+4 backplane run.

Deployment Considerations:

• Confirm your SR630 V2 backplane variant is specifically the 6+4 AnyBay configuration before ordering — Lenovo offers multiple backplane options for this platform and the cable assemblies are not interchangeable.
• Available spec data for this part number is limited to distribution attributes; cross-reference the Lenovo ThinkSystem SR630 V2 Hardware Maintenance Manual for precise cable routing diagrams before pulling the old assembly.

Best fit for IT teams maintaining a spare-parts inventory for SR630 V2 fleets in data center or enterprise server room environments where unplanned storage bay failures require fast, like-for-like replacement without waiting on a warranty depot cycle.